H.239
Encyclopedia
H.239 is an ITU-T
recommendation from the H.32x Multimedia Communications' macrofamily of standards for multimedia communications over various networks.
The H.239 recommendation is titled "Role management and additional media channels for H.3xx-series terminals". Practical importance of this recommendation is its setting forth a way to have multiple video channels (e.g., one for conferencing, another for presentation) within a single session (call).
's H.32x (which includes H.323
) and H.245
series of standards, called "recommendations" by the ITU
.
Tandberg
introduced the ability to send a computer or video presentation along with a video teleconference session in 2000 with their "DuoVideo" feature in February 2000.
PictureTel introduced People+Content in July 2000. Polycom then acquired PictureTel in May 2001 and began offering their proprietary, patented method to other vendors on a royalty-free basis in 2002.
In Feb. 2003 the ITU-T took up a proposal by vendors to create a standard based on Tandberg and Polycom technology. The ITU-T published this technology as Recommendation H.239 in July 2003.
For presentations in multipoint conferencing, H.239 defines token procedures to guarantee that only one endpoint in the conference sends the additional video channel which is then distributed to all conference participants.
The signaling for H.239 is defined in a way which simplifies implementation of gateways
between H.323 and H.320.
. When the set of capabilities includes an indication that H.239 presentations are supported, a connected endpoint can choose to open an additional video channel. First the endpoint has to request a token from the MCU. The MCU then will check if there is another endpoint currently sending an additional video channel. The MCU will use token messages to make this endpoint stop sending the additional video channel. Then the MCU will acknowledge the token request from the first endpoint which then can begin to send the additional video channel which e.g. contains encoded video from a computer's video output at XGA resolution.
Similar procedures are defined for the case when two endpoints are directly connected to each other without an intermediate MCU.
ITU-T
The ITU Telecommunication Standardization Sector is one of the three sectors of the International Telecommunication Union ; it coordinates standards for telecommunications....
recommendation from the H.32x Multimedia Communications' macrofamily of standards for multimedia communications over various networks.
The H.239 recommendation is titled "Role management and additional media channels for H.3xx-series terminals". Practical importance of this recommendation is its setting forth a way to have multiple video channels (e.g., one for conferencing, another for presentation) within a single session (call).
History
H.239 builds on the ITU-TITU-T
The ITU Telecommunication Standardization Sector is one of the three sectors of the International Telecommunication Union ; it coordinates standards for telecommunications....
's H.32x (which includes H.323
H.323
H.323 is a recommendation from the ITU Telecommunication Standardization Sector that defines the protocols to provide audio-visual communication sessions on any packet network...
) and H.245
H.245
H.245 is a control channel protocol used with[in] e.g. H.323 and H.324 communication sessions, and involves the line transmission of non-telephone signals. It also offers the possibility to be tunneled within H.225.0 call signaling messages...
series of standards, called "recommendations" by the ITU
Itu
Itu is an old and historic municipality in the state of São Paulo in Brazil. The population in 2009 was 157,384 and the area is 641.68 km². The elevation is 583 m. This place name comes from the Tupi language, meaning big waterfall. Itu is linked with the highway numbered the SP-75 and are flowed...
.
Tandberg
Tandberg
This article is about the video-conferencing vendor, a Cisco company. Other companies with the same name such as Tandberg Television or Tandberg Data for data storage: see here and here...
introduced the ability to send a computer or video presentation along with a video teleconference session in 2000 with their "DuoVideo" feature in February 2000.
PictureTel introduced People+Content in July 2000. Polycom then acquired PictureTel in May 2001 and began offering their proprietary, patented method to other vendors on a royalty-free basis in 2002.
In Feb. 2003 the ITU-T took up a proposal by vendors to create a standard based on Tandberg and Polycom technology. The ITU-T published this technology as Recommendation H.239 in July 2003.
Overview
A traditional videoconference has an audio channel, a video channel and an optional data channel. The video channel typically carries the camera image of the participants. H.239 defines rules and messages for establishing an additional video/graphics channel, often to transmit a PC graphics presentation or video from a document camera, while still transmitting the video of the presenter.For presentations in multipoint conferencing, H.239 defines token procedures to guarantee that only one endpoint in the conference sends the additional video channel which is then distributed to all conference participants.
The signaling for H.239 is defined in a way which simplifies implementation of gateways
Gateway (telecommunications)
In telecommunications, the term gateway has the following meaning:*In a communications network, a network node equipped for interfacing with another network that uses different protocols....
between H.323 and H.320.
Procedure
When an H.323 call is connected, signaling defined in H.245 is used to establish the set of capabilities for all connected endpoints and MCUsMultipoint Control Unit
A Multipoint Control Unit is a device commonly used to bridge videoconferencing connections.The Multipoint Control Unit is an endpoint on the LAN that provides the capability for 3 or more terminals and gateways to participate in a multipoint conference...
. When the set of capabilities includes an indication that H.239 presentations are supported, a connected endpoint can choose to open an additional video channel. First the endpoint has to request a token from the MCU. The MCU then will check if there is another endpoint currently sending an additional video channel. The MCU will use token messages to make this endpoint stop sending the additional video channel. Then the MCU will acknowledge the token request from the first endpoint which then can begin to send the additional video channel which e.g. contains encoded video from a computer's video output at XGA resolution.
Similar procedures are defined for the case when two endpoints are directly connected to each other without an intermediate MCU.