K.N.Toosi University of Technology
Encyclopedia
Khajeh Nasir Toosi University of Technology (KNTU), is a public university in Tehran
, Iran
, named after medieval Persian scholar Khajeh Nasir Toosi.
The department of Civil Engineering was founded in 1955 as an Institute of Surveying. This institute was later joined by the Institutes of Hydraulic Engineering and Structural Engineering. The department of Mechanical Engineering was founded in 1973. These institutes of higher education were formally integrated in 1980 and named "Technical and Engineering University Complex". As a general practice of paying tribute to the scientific and scholastic figures of the nation, the university was renamed in 1984 "Khajeh Nassir-Al-Deen Toosi (K.N.Toosi) University of Technology". This university is affiliated with the Ministry of Science, Research and Technology of Iran.
The photo on the right is taken at the old Digital Control Lab at Electrical Engineering department showing the technical students in a lab.
.jpg)
The faculties of this University were founded as follows :
Due to the varied origins of K.N.Toosi, the faculties are not concentrated in one campus and as a result, the university has 5 campuses plus a central building. However, the plan for centralizing the University is underway. Each faculty has its own computer center, library and educational services office. All libraries are attached to the Simorgh library network. Several housing facilities are available for men, women and couples. There are also sports facilities on all campuses. The University is currently programming the development of a branch in Venezuela and also several research centers in Tehran.
The Central Building which is located at Mirdamad Ave., Tehran, is actually the managing body of the university and the presidency, all vice presidencies, the central academic services and registerar's office are located at this building. Management of educational services happens through the Golestan educational management system, while research is managed via the Sepid research management system.
It is the main and the oldest faculty of K.N. Toosi University of Technology.
It is also the first Electrical Engineering faculty in Iran.
The faculty has about 70 full-time faculty members.
Currently, this faculty is among the best Electrical Engineering faculties in Iran, especially in graduate studies in the field of Communications, Controls, and Biomedical Engineering (Signal & Image Processing).
It currently offers the following programs:
This faculty is located at Seyedkhandan Bridge, beside the Ministry of Communication. A recreational center is located on this campus.
During the years 2000-2007 the faculty used the facilities of the Mechanical Engineering Faculty. In June 2007, the Faculty of Mechanical Engineering moved to its new campus, and the faculty became independent. Some of the facilities of the Faculty of Mechanical Engineering (such as workshops) were kept on the Aerospace Engineering campus.
The campus is located in University Boulevard, Vafadar St., Tehranpars. The faculty has a large library that is being equipped.The aerospace engineering student accommodation is located just beside the faculty. The Nasir Gym(K.N.Toosi's newest recreational building) is also located beside the faculty. There are plans for building several recreational facilities, including a gym, at this site. Currently, the workshop complex of K.N.Toosi is also located at this campus.
There are about 170 students studying at the faculty and there are 10 full-time faculty members. The faculty also uses many part-time professors, usually from the Faculty of Mechanical Engineering. The first group of joint program students were sent to Russia in August 2007. The faculty is going to launch its P.H.D program in 2008.
The faculty was the host of the Sixth national and Second international Conference of the Iranian Aerospace Society. A new research Center eas established at the faculty in 2007, conducting industrial research in aerospace. There are currently several research laboratories located at the faculty, including:
* MDO Lab
* Control Lab
* Combustion and Propulsion Research Lab
* Aerodynamics Lab and Wind tunnel
* Parallel Processing Lab
* Space Research Lab
The table below shows the programs currently available at the faculty:
It currently offers the following programs:
The campus is jointly used by this faculty and the Faculty of Geodesy and Geomatics Engineering. The library contains about 7,000 books in Persian, 6,000 books in English and other foreign languages, 130 journals in different languages, and 150 thesis and research reports. The university's bookshop is located on this campus. There is also a housing facility and some sport facilities. The faculty has several fully equipped labs used for research or teaching.
The laboratories are as follows:
Structural Engineering Laboratories:
Concrete, Structures, Mechanics of Materials, Materials of Construction.
Water Engineering Laboratories:
Hydrology, Hydraulics, and Hydraulic Models.
Road and Transportation Engineering Laboratories:
Pavement Properties
Soil and Foundation Engineering Laboratories:
Soil Mechanics Laboratory
Earthquake Engineering
Laboratories:
Structural Dynamics Laboratory, including ambient and forced vibration testing devices for the evaluation and measurement of the dynamic characteristics of the existing structures, as well as an earthquake computer site.
Environmental Engineering Laboratories:
Water and Waste Water Chemistry, Redundant Solid Materials, and Microbiology.
This faculty is expert in concrete engineering and has won national and international awards for its achievements in this field. These include first place in 2002 and 2003, second place in 2001 and third place in 2004 in the cement competitions of the American Concrete Institute(ACI). They have also been awarded third place in the bridge design and construction with Balsa wood competition in 2003. The students publish a scientific journal named "Abanegan آبانگان" dedicated to Water Engineering.
The faculty has 28 full-time faculty members. It is located at Valiasr St., opposite the Eskan towers. Student accommodation, a recreational center and the universities bookshop is located on this campus.
This center is currently located on the Faculty of Aerospace Engineering campus with a division in the Central building of the university (Mirdamad Ave.).
As the only Faculty of Geodesy and Geomatics in Iran, this faculty is currently recognized as one of the leading educational and research centers of Iran in geodesy and geomatic engineering. With more than 19 full-time faculty members, this Faculty currently offers various programs in both graduate and undergraduate levels.
It currently offers the following programs:
This faculty os currently located at Valiasr St., opposite the Eskan towers.
With 17 full-time academic members, this Faculty is working hard in order to improve the quality of education and research at the KNTU.
Programs and Degrees Presented at Faculty of Industrial Engineering :
Laboratories :
- precision measurement and quality control
- simulation
- information technology
- industrial systems and automation
- advanced design and production and robotics
- time and motion study
Research Capabilities and Interests:
- Air Traffic Flow Management & Ground Holding Problem
- Information technology- Electronic commerce
- Quality control systems in production processes
- Quality management systems
- Planning and production control
- Maintenance systems
- Industrial design based on human being factors
- Analysis of ergonomic problems
- Analysis of industrial systems using computer simulation
- Internet marketing
- ISCM
- e-CRM
- Commercial intelligence
- Decision making in trade and industry
- ERP
This faculty is currently located at Mollasadra building, Pardis St., Mollasadra St., Vanak Sq. However, it also operates a building at seyedkhandan bridge, Dabestan alley.
In June 2007, the Faculty of Mechanical Engineering moved to its new campus.
The faculty has 44 full-time faculty members. This faculty is the richest faculty of Iran in terms of percentage of associate and full professors because half of the faculty members are associate professors, in addition to 6 full professors. This is one of the most equipped mechanical engineering faculties in Iran and Middle East.
It currently offers the following programs:
This faculty is currently located at Mollasadra building, Pardis St., Mollasadra St., Vanak Sq.
This faculty is currently located at Kavian St., Jolfa St., Shariati St.. A recreational center is located on this campus.
This faculty currently provides the following programs:
The courses in most international programs are offered in English. Admission to these programs is either through the National Entrance Exam (Konkoor) or through special exams conducted by KNTU. The tuition fee varies for each program. The following joint international programs are currently active:
There are several research centers at this university including:
There are several research laboratories at this university including:
There are also several workshops such as the following, in many of which research is conducted:
Tehran
Tehran , sometimes spelled Teheran, is the capital of Iran and Tehran Province. With an estimated population of 8,429,807; it is also Iran's largest urban area and city, one of the largest cities in Western Asia, and is the world's 19th largest city.In the 20th century, Tehran was subject to...
, Iran
Iran
Iran , officially the Islamic Republic of Iran , is a country in Southern and Western Asia. The name "Iran" has been in use natively since the Sassanian era and came into use internationally in 1935, before which the country was known to the Western world as Persia...
, named after medieval Persian scholar Khajeh Nasir Toosi.
History
The university was founded in 1928, during the reign of Reza Shah Pahlavi , in Tehran and was named the "Institute of Communications". It is therefore considered to be the oldest surviving academic institution across the country (Iran has had universities 800 to 2000 years ago from which only the name, ruins and scientific history have survived). This institute was later expanded with an Electronic and Electrical Power Engineering department. The 50th anniversary of the establishment of this academic institute is celebrated in 1978, and a commemorative stamp was also published in this respect by the Post of Iran, prior to the Islamic Revolution of 1979 (See the Photo).The department of Civil Engineering was founded in 1955 as an Institute of Surveying. This institute was later joined by the Institutes of Hydraulic Engineering and Structural Engineering. The department of Mechanical Engineering was founded in 1973. These institutes of higher education were formally integrated in 1980 and named "Technical and Engineering University Complex". As a general practice of paying tribute to the scientific and scholastic figures of the nation, the university was renamed in 1984 "Khajeh Nassir-Al-Deen Toosi (K.N.Toosi) University of Technology". This university is affiliated with the Ministry of Science, Research and Technology of Iran.
Faculties
- Faculty of Electrical EngineeringElectrical engineeringElectrical engineering is a field of engineering that generally deals with the study and application of electricity, electronics and electromagnetism. The field first became an identifiable occupation in the late nineteenth century after commercialization of the electric telegraph and electrical...
(1928)http://www.kntu.ac.ir/electrical - Faculty of Civil EngineeringCivil engineeringCivil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings...
(1955)http://www.kntu.ac.ir/civil - Faculty of GeodesyGeodesyGeodesy , also named geodetics, a branch of earth sciences, is the scientific discipline that deals with the measurement and representation of the Earth, including its gravitational field, in a three-dimensional time-varying space. Geodesists also study geodynamical phenomena such as crustal...
and Geomatics EngineeringGeomatics engineeringGeomatics Engineering, Geomatic Engineering, or Geospatial Engineering is a rapidly developing discipline that focuses on spatial information . The location is the primary factor used to integrate a very wide range of data for viewing and analysis...
(1955)http://www.kntu.ac.ir/geodesy - Faculty of Mechanical EngineeringMechanical engineeringMechanical engineering is a discipline of engineering that applies the principles of physics and materials science for analysis, design, manufacturing, and maintenance of mechanical systems. It is the branch of engineering that involves the production and usage of heat and mechanical power for the...
(1973)http://www.kntu.ac.ir/mechanical - Faculty of ScienceScienceScience is a systematic enterprise that builds and organizes knowledge in the form of testable explanations and predictions about the universe...
(1980)http://www.kntu.ac.ir/science - Faculty of Industrial EngineeringIndustrial engineeringIndustrial engineering is a branch of engineering dealing with the optimization of complex processes or systems. It is concerned with the development, improvement, implementation and evaluation of integrated systems of people, money, knowledge, information, equipment, energy, materials, analysis...
(1998)http://www.kntu.ac.ir/industrial - Faculty of Aerospace EngineeringAerospace engineeringAerospace engineering is the primary branch of engineering concerned with the design, construction and science of aircraft and spacecraft. It is divided into two major and overlapping branches: aeronautical engineering and astronautical engineering...
(2006)http://www.kntu.ac.ir/aero - The E-Learning Center (2004)http://www.kntu-elearning.ir/
Due to the varied origins of K.N.Toosi, the faculties are not concentrated in one campus and as a result, the university has 5 campuses plus a central building. However, the plan for centralizing the University is underway. Each faculty has its own computer center, library and educational services office. All libraries are attached to the Simorgh library network. Several housing facilities are available for men, women and couples. There are also sports facilities on all campuses. The University is currently programming the development of a branch in Venezuela and also several research centers in Tehran.
The Central Building which is located at Mirdamad Ave., Tehran, is actually the managing body of the university and the presidency, all vice presidencies, the central academic services and registerar's office are located at this building. Management of educational services happens through the Golestan educational management system, while research is managed via the Sepid research management system.
Programs
The university offers Bachelor's (B.S.) degrees in more than 20 and Master's (M.S.) degrees in 50 academic fields.The university also has 28 PhD programs. It also hosts more than 5 joint educational programs both at B.S. and M.S. levels. The courses offered have industrial orientation on a broad base. The university has 250 full-time faculty members. The total number of students is about 7,000.Faculty of Electrical and Computer Engineering
Faculty of Electrical and Computer Engineering was founded in 1928.It is the main and the oldest faculty of K.N. Toosi University of Technology.
It is also the first Electrical Engineering faculty in Iran.
The faculty has about 70 full-time faculty members.
Currently, this faculty is among the best Electrical Engineering faculties in Iran, especially in graduate studies in the field of Communications, Controls, and Biomedical Engineering (Signal & Image Processing).
It currently offers the following programs:
| B.Sc. | M.Sc. | Ph.D. |
|---|---|---|
| Biomedical Engineering | Biomedical Engineering | |
| Electrical Engineering-Communications | Communications | Communications |
| Electrical Engineering-Control | Control | Control |
| Electrical Engineering-Electronics | Electronics | Electronics |
| Electrical Engineering-Power Engineering | Power Engineering | Power Engineering |
| Computer Engineering-Hardware | Artificial Intelligence | |
| Computer Engineering-Software | Artificial Intelligence |
This faculty is located at Seyedkhandan Bridge, beside the Ministry of Communication. A recreational center is located on this campus.
- Coordinates: 35.7390°N 51.4486°W
- Official website: www.ee.kntu.ac.ir
Faculty of Aerospace Engineering
This is the youngest of the KNTU faculties. The core of the faculty was formed as Aerospace group in the Faculty of Mechanical Engineering in the year 2000. It provided MSc programs in aerodynamics, propulsion, flight dynamics and aerospace structures. In the year 2001, it launched the first MSc program in space machinery engineering in Iran. Later, in the year 2004, the BSc joint aerospace engineering program with MATI(Moscow Aerospace Technological University) was launched. In the year 2006, the Faculty had officially become independent from the Mechanical Engineering faculty and the first group of BSc state students were admitted through the Iranian University Entrance Examinations.During the years 2000-2007 the faculty used the facilities of the Mechanical Engineering Faculty. In June 2007, the Faculty of Mechanical Engineering moved to its new campus, and the faculty became independent. Some of the facilities of the Faculty of Mechanical Engineering (such as workshops) were kept on the Aerospace Engineering campus.
The campus is located in University Boulevard, Vafadar St., Tehranpars. The faculty has a large library that is being equipped.The aerospace engineering student accommodation is located just beside the faculty. The Nasir Gym(K.N.Toosi's newest recreational building) is also located beside the faculty. There are plans for building several recreational facilities, including a gym, at this site. Currently, the workshop complex of K.N.Toosi is also located at this campus.
There are about 170 students studying at the faculty and there are 10 full-time faculty members. The faculty also uses many part-time professors, usually from the Faculty of Mechanical Engineering. The first group of joint program students were sent to Russia in August 2007. The faculty is going to launch its P.H.D program in 2008.
The faculty was the host of the Sixth national and Second international Conference of the Iranian Aerospace Society. A new research Center eas established at the faculty in 2007, conducting industrial research in aerospace. There are currently several research laboratories located at the faculty, including:
* MDO Lab
* Control Lab
* Combustion and Propulsion Research Lab
* Aerodynamics Lab and Wind tunnel
* Parallel Processing Lab
* Space Research Lab
The table below shows the programs currently available at the faculty:
| B.Sc. | M.Sc. | Ph.D. |
|---|---|---|
| Aerospace Engineering | Aerospace Engineering(Propulsion) | Aerospace Engineering(Propulsion) |
| Aerospace Engineering(Joint Program with MATI University- Russia) | Aerospace Engineering(Aerodynamics) | Aerospace Engineering(Flight Dynamics and Control) |
| Aerospace Engineering(Space Machinery) | Aerospace Engineering(Joint Program with MATI University-Russia) | |
| Aerospace Engineering(Flight Dynamics and Control) | ||
| Aerospace Engineering(Aerospace Structures) |
Faculty of Civil Engineering
This faculty comprises six groups: water engineering-soil engineering-structural engineering-transportation engineering-environmental engineeringIt currently offers the following programs:
| B.Sc. | M.Sc. | Ph.D. |
|---|---|---|
| Civil Engineering | Water: Water Resources | Applied Designing |
| Water: Hydraulics | Structural Engineering | |
| Environment | Soil and Foundation Engineering | |
| Earthquake | ||
| Structures | ||
| Hydraulic Structures | ||
| Road and Transportation | ||
| Soil Mechanics and Foundations | ||
| Marine Structures |
The campus is jointly used by this faculty and the Faculty of Geodesy and Geomatics Engineering. The library contains about 7,000 books in Persian, 6,000 books in English and other foreign languages, 130 journals in different languages, and 150 thesis and research reports. The university's bookshop is located on this campus. There is also a housing facility and some sport facilities. The faculty has several fully equipped labs used for research or teaching.
The laboratories are as follows:
Structural Engineering Laboratories:
Concrete, Structures, Mechanics of Materials, Materials of Construction.
Water Engineering Laboratories:
Hydrology, Hydraulics, and Hydraulic Models.
Road and Transportation Engineering Laboratories:
Pavement Properties
Soil and Foundation Engineering Laboratories:
Soil Mechanics Laboratory
Earthquake Engineering
Earthquake engineering
Earthquake engineering is the scientific field concerned with protecting society, the natural and the man-made environment from earthquakes by limiting the seismic risk to socio-economically acceptable levels...
Laboratories:
Structural Dynamics Laboratory, including ambient and forced vibration testing devices for the evaluation and measurement of the dynamic characteristics of the existing structures, as well as an earthquake computer site.
Environmental Engineering Laboratories:
Water and Waste Water Chemistry, Redundant Solid Materials, and Microbiology.
This faculty is expert in concrete engineering and has won national and international awards for its achievements in this field. These include first place in 2002 and 2003, second place in 2001 and third place in 2004 in the cement competitions of the American Concrete Institute(ACI). They have also been awarded third place in the bridge design and construction with Balsa wood competition in 2003. The students publish a scientific journal named "Abanegan آبانگان" dedicated to Water Engineering.
The faculty has 28 full-time faculty members. It is located at Valiasr St., opposite the Eskan towers. Student accommodation, a recreational center and the universities bookshop is located on this campus.
The E-Learning Center
In 2004 K.N.Toosi successfully started its E-Learning programs. The following programs are currently available:- Bsc in Industrial Engineering (system analysis)
- Bsc in IT
- Bsc in Computer Engineering (software)
- Msc in Industrial Engineering (System Analysis)
- Msc in IT (Information systems engineering)
This center is currently located on the Faculty of Aerospace Engineering campus with a division in the Central building of the university (Mirdamad Ave.).
Faculty of Geodesy and Geomatics
The educational activities of this Faculty started in 1954 as Geomatics Institute. This was shortly after the establishment of the Geomatics Organization of Iran. The mission of the newly established Geomatics Institute was mainly to train professional geomatics work force for governmental organizations. In 1980, this institute joined the newly established K.N. Toosi University of Technology. Initially it was known as the Faculty of Civil Engineering and the geodesy and geomatics engineering was one of the departments of this Faculty. With the expansion of the University, in 2001, this department made an independent faculty under the name of Geodesy and Geomatic Engineering to meet the growing demand in the field.As the only Faculty of Geodesy and Geomatics in Iran, this faculty is currently recognized as one of the leading educational and research centers of Iran in geodesy and geomatic engineering. With more than 19 full-time faculty members, this Faculty currently offers various programs in both graduate and undergraduate levels.
It currently offers the following programs:
| B.Sc. | M.Sc. | Ph.D. |
|---|---|---|
| Geomatic Engineering (Geodesy and Geomatics) | Geodesy | Geodesy |
| Photogrammetry | Photogrammetry and Remote sensing | |
| Remote sensing | GIS | |
| GIS | ||
| Control |
This faculty os currently located at Valiasr St., opposite the Eskan towers.
Faculty of Industrial Engineering
In 1993, the Department of Industrial Engineering was formed within the Faculty of Mechanical Engineering. In 1999, this Department was separated from the Faculty of Mechanical Engineering to continue its activities as an independent Faculty. Graduates of this Faculty have had outstanding success in getting admission to higher programs.With 17 full-time academic members, this Faculty is working hard in order to improve the quality of education and research at the KNTU.
Programs and Degrees Presented at Faculty of Industrial Engineering :
| B.Sc. | M.Sc. | Ph.D. |
|---|---|---|
| Industrial Production | Industrial Engineering | Industrial Engineering |
| Systems Analysis and Planning | IT | |
| E-Commerce | ||
| MBA |
Laboratories :
- precision measurement and quality control
- simulation
- information technology
- industrial systems and automation
- advanced design and production and robotics
- time and motion study
Research Capabilities and Interests:
- Air Traffic Flow Management & Ground Holding Problem
- Information technology- Electronic commerce
- Quality control systems in production processes
- Quality management systems
- Planning and production control
- Maintenance systems
- Industrial design based on human being factors
- Analysis of ergonomic problems
- Analysis of industrial systems using computer simulation
- Internet marketing
- ISCM
- e-CRM
- Commercial intelligence
- Decision making in trade and industry
- ERP
This faculty is currently located at Mollasadra building, Pardis St., Mollasadra St., Vanak Sq. However, it also operates a building at seyedkhandan bridge, Dabestan alley.
Faculty of Mechanical Engineering
Faculty of Mechanical Engineering was founded in 1973.In June 2007, the Faculty of Mechanical Engineering moved to its new campus.
The faculty has 44 full-time faculty members. This faculty is the richest faculty of Iran in terms of percentage of associate and full professors because half of the faculty members are associate professors, in addition to 6 full professors. This is one of the most equipped mechanical engineering faculties in Iran and Middle East.
It currently offers the following programs:
| B.Sc. | M.Sc. | Ph.D. |
|---|---|---|
| Mechanical Engineering(Thermo-fluid) | Mechatronics | Energy Conversion |
| Mechanical Engineering(Solids) | Applied Design | Applied Design |
| Energy Conversion | ||
| Manufacturing Technology and Processes | ||
| Material science | ||
| Sensing and Control Systems | ||
| Energy Systems | ||
| Automotive Engineering |
This faculty is currently located at Mollasadra building, Pardis St., Mollasadra St., Vanak Sq.
Faculty of Science
The ex-Faculty of Basic Sciences started its activities in 1980 by presenting basic science courses to engineering students of different disciplines. In 1987, the expansion of the Faculty allowed admission of undergraduate applied science students and the name was altered to Faculty of Science. The Faculty consists of four departments: Applied Chemistry, Applied Physics, Mathematics, and the Department of General Courses. The latter department provides courses in theology and ethics, Persian literature, English, and physical education.This faculty is currently located at Kavian St., Jolfa St., Shariati St.. A recreational center is located on this campus.
This faculty currently provides the following programs:
| B.Sc. | M.Sc. | Ph.D. |
|---|---|---|
| Applied Chemistry | Physical Chemistry | Electrochemistry |
| Pure Mathematics | Organic Chemistry | Physical Chemistry |
| Applied Mathematics | Inorganic Chemistry | Organic Chemistry |
| Solid State Physics | Analytical Chemistry | Analytical Chemistry |
| Pure Mathematics | Pure Mathematics(functional analysis) | |
| Applied Mathematics | Pure Mathematics(harmonic analysis) | |
| Nuclear Physics | Pure Mathematics(Algebra-modules and loops) | |
| Solid State Physics | Pure Mathematics(Algebra-algebrical number theory) | |
| Pure mathematics(finite groups theory) | ||
| Applied mathematics(operational research) | ||
| Applied mathematics(numerical analysis) |
Department of Applied Chemistry
The department has 12 full-time faculty members specialized in chemical physics, analytical chemistry, organic and inorganic chemistry, and electrochemistry. Besides the undergraduate program, the Department offers an undergraduate program leading to BSc in applied chemistry and graduate programs leading to MSc and PhD degrees in different related disciplines.Joint International Programs
KNTU is currently collaborating in various research and teaching programs with many universities around the world. In this regard, Memoranda of Understanding have been signed between KNTU and universities from Australia, Canada, Cyprus, France, Germany, Russia, and the United Kingdom.The courses in most international programs are offered in English. Admission to these programs is either through the National Entrance Exam (Konkoor) or through special exams conducted by KNTU. The tuition fee varies for each program. The following joint international programs are currently active:
- MSc program in Remote Sensing and Geographic Information Systems with the International Institute for Aerospace Survey and Earth Sciences (ITC), the Netherlands.
- MSc program in Automotive Engineering with Kingston University, London, UK.
- MSc program in Energy Systems with University of Manchester, Manchester, UK.
- BSc program in Aerospace Engineering with Moscow State University of Aerospace Technology (MATI), Moscow, Russia.
- Phd program in Aerospace Engineering with Moscow State University of Aerospace Technology (MATI), Moscow, Russia.
Research
K.N.Toosi University of Technology is known for its industrial relations. It conducts research for many companies such as Iran Khodro, Saipa, Aerospace Industries Organization and research is conducted in all the labarotories throughout the university and even research groups such as ARAS research group exist within faculties. The Launch Vehicle research center has started its work at the faculty of Aerospace Engineering as one of the first centers of its kind. There are several centers of excellence at this university including the following:- Center of Excellence in liquid propellant launch vehicle design
- Center of excellence in space engineering
- Center of excellence in robotics and control
- Center of excellence in materials and modern structures
- Center of excellence in energy systems and fluids
There are several research centers at this university including:
- Space Systems Research Center
There are several research laboratories at this university including:
- Propulsion and Combustion Research laboratory (Faculty of Aerospace Engineering)
- MDO(multidisciplinary design optimization) Research laboratory (Faculty of Aerospace Engineering)
- Space Research laboratory (Faculty of Aerospace Engineering)
- Aerodynamics Research laboratory (Faculty of Aerospace Engineering)
- Subsonic wind tunnel (Faculty of Aerospace Engineering)
- Parallel processing Research laboratory (Faculty of Aerospace Engineering)
- Actuators Research laboratory (Faculty of Mechanical Engineering)
- Vibrations and Automobiles Research laboratory (Faculty of Mechanical Engineering)
- Virtual Reality Research laboratory (Faculty of Mechanical Engineering)
- Composite Research laboratory (Faculty of Mechanical Engineering)
- Fracture Mechanics Research laboratory (Faculty of Mechanical Engineering)
- Instrumentation and Control Research laboratory (Faculty of Mechanical Engineering)
- Combustion Research laboratory (Faculty of Mechanical Engineering)
- Turbomachinery Research laboratory (Faculty of Mechanical Engineering)
- Nano and Materials Research laboratory (Faculty of Mechanical Engineering)
- Robotics Research laboratory (Faculty of Mechanical Engineering)
- Digital Control Systems Research laboratory (Faculty of Electrical Engineering)
- Industrial Control Research laboratory (Faculty of Electrical Engineering)
- Instrumentation Research laboratory (Faculty of Electrical Engineering)
- Intelligent Systems Research laboratory (Faculty of Electrical Engineering)
- Linear System Theory Research laboratory (Faculty of Electrical Engineering)
- Adaptive Control Systems Research laboratory (Faculty of Electrical Engineering)
- System Identification Research laboratory (Faculty of Electrical Engineering)
- Optimal Control Systems Research laboratory (Faculty of Electrical Engineering)
- Nonlinear Control Systems Research laboratory (Faculty of Electrical Engineering)
- Robust Control Systems Research laboratory (Faculty of Electrical Engineering)
- Robotics Research laboratory (Faculty of Electrical Engineering)
- Guidance and Navigation Research laboratory (Faculty of Electrical Engineering)
- Automation Research laboratory (Faculty of Electrical Engineering)
- Process Control Research laboratory (Faculty of Electrical Engineering)
- Biomedical Engineering Research laboratory (Faculty of Electrical Engineering)
- Bioelectric Artificial Organs Research laboratory (Faculty of Electrical Engineering)
- Antenna Research laboratory (Faculty of Electrical Engineering)
- Communication Circuits Research laboratory (Faculty of Electrical Engineering)
- DSP (Digital Signal Processing) Research laboratory (Faculty of Electrical Engineering)
- Microwave Research laboratory (Faculty of Electrical Engineering)
- Optical Fibers Research laboratory (Faculty of Electrical Engineering)
- Logical circuits Research laboratory (Faculty of Electrical Engineering)
- Microprocessor Research laboratory (Faculty of Electrical Engineering)
- Computer Networks Research laboratory (Faculty of Electrical Engineering)
- FPGA Research laboratory (Faculty of Electrical Engineering)
- Computer Research laboratory (Faculty of Electrical Engineering)
- Parallel Prossesing Research laboratory (Faculty of Electrical Engineering)
- Computer Architecture Research laboratory (Faculty of Electrical Engineering)
- Digital Electronic Research laboratory (Faculty of Electrical Engineering)
- Electronic Circuits Research laboratory (Faculty of Electrical Engineering)
- High Voltage Laboratory (Faculty of Electrical Engineering)
- Power System Laboratory (Faculty of Electrical Engineering)
- Relaying and Protection Laboratory (Faculty of Electrical Engineering)
- Special Machines Laboratory (Faculty of Electrical Engineering)
- Power Electronics Laboratory (Faculty of Electrical Engineering)
- Electric Machinery Laboratory (Faculty of Electrical Engineering)
- Exact Measurement and Quality Control Research laboratory (Faculty of Industrial Engineering)
- Simulation Research laboratory (Faculty of Industrial Engineering)
- IT(Information Technology) Research laboratory (Faculty of Industrial Engineering)
- Automation and Industrial Systems Research laboratory (Faculty of Industrial Engineering)
- Robotics and Design and Manufacturing Research laboratory (Faculty of Industrial Engineering)
- Numerical Computation Research laboratory (Faculty of Science)
- Laser Research laboratory (Faculty of Science)
- Solid-state Physics Research laboratory (Faculty of Science)
There are also several workshops such as the following, in many of which research is conducted:
- Automechanic Workshop (on the Faculty of AE Eng. campus)
- Casting Workshop (on the Faculty of AE Eng. campus)
- Sheet-metal Workshop (on the Faculty of AE Eng. campus)
- Electrical Engineering Workshop (Faculty of Electrical Engineering)
See also
- Higher education in IranHigher education in IranIran has a large network of private, public, and state affiliated universities offering degrees in higher education. State-run universities of Iran are under the direct supervision of Iran's Ministry of Science, Research and Technology and Ministry of Health and Medical Education .-Pre-Islamic...
- Toosi's library management system