Applied Mechanics Division
Encyclopedia
The Applied Mechanics Division (AMD) is a division in the American Society of Mechanical Engineers
(ASME). The AMD was founded in 1927, with Stephen Timoshenko
being the first chair. The current AMD membership is over 5000, out of about 90,000 members of the ASME. AMD is the largest of the six divisions in the ASME Basic Engineering Technical Group.
.
Each member serves a term of five years, beginning and ending at the conclusion of the Summer Meeting, spending one year in each of the following positions:
New members of the Executive Committee are sought from the entire membership of the Division. Due considerations are given to leadership, technical accomplishment, as well as diversity in geographic locations, sub-disciplines, and genders. At the Winter Annual Meeting each year, the Executive Committee nominates one new member, who is subsequently appointed by the ASME Council.
The executive committee has an additional non-rotating position, the Recording Secretary. The responsibility of the Recording Secretary is to attend and record minutes for the Executive Committee Meeting at the Summer and Winter Annual Meeting and the General Committee Meeting at the Winter Annual Meeting. The Recording Secretary serves a term of two years and is selected from the junior members (i.e. young investigators) of the AMD.
There are 17 Technical Committees in the Applied Mechanics Division.
Technical Committees are established and dissolved by the Executive Committee.
Dan Inman (2009),
Ravi-Chandar (2008),
Thomas N. Farris (2007),
Wing Kam Liu (2006),
Mary C. Boyce (2005),
Pol Spanos (2004),
Stelios Kyriakides (2003),
Dusan Krajcinovic (2002),
Thomas J.R. Hughes
(2001),
Alan Needleman
(2000),
Lallit Anand (1999),
Stanley A. Berger (1998),
Carl T. Herakovich (1997),
Thomas A. Cruse (1996),
John W. Hutchinson
(1995),
L.B. Freund (1994),
David B. Bogy (1993),
William S. Saric (1992),
Ted Belytschko
(1991),
Michael J. Forrestal (1990),
Sidney Leibovich (1989),
Thomas L. Geers (1988),
James R. Rice
(1987),
Michael M. Carroll (1986),
Jan D. Achenbach (1985),
Charles R. Steele (1984),
William G. Gottenberg (1983),
R.C. DiPrima (1982),
R.M. Christensen (1981),
R.S. Rivlin (1980),
Richard Skalak
(1979),
F. Essenburg (1978),
Yuan-Cheng Fung
(1977),
J. Miklowitz (1976),
B.A. Boley (1975),
George Herrmann (1974),
J. Kestin (1973),
Paul M. Naghdi (1972),
S. Levy (1971),
H.N. Abramson (1970),
Stephen H. Crandall
(1969),
P.G. Hodge, Jr. (1968),
R. Plunkett (1967),
M.V. Barton (1966),
George F. Carrier
(1965),
Daniel C. Drucker
(1964),
E. Reissner (1963),
A.M. Wahl (1961, 1962),
S.B. Batdorf (1960),
William Prager
(1959),
W. Ramberg (1958),
M. Hetenyl (1957),
Raymond D. Mindlin
(1956),
N.H. Hoff (1955),
N.M. Newmark (1954),
D. Young (1953),
R.E. Peterson (1952),
L.H. Donnell (1951),
R.P. Kroon (1950),
M. Golan (1949),
W.M. Murray (1948),
H.W. Emmons (1947),
H. Poritsky (1946),
J.N. Goodier (1945),
J.H. Keenan (1943, 1944),
J.L. Dryden (1942),
J.P. Den Hartog (1940, 1941),
C.R. Soderberg (1937,1938),
E.O. Waters (1936),
J.A. Goff (1935),
F.M. Lewis (1934),
J.M. Lessells (1933),
G.B. Pegram (1932),
A.L. Kimball (1931),
G.M. Eaton (1928, 1929),
Stephen P. Timoshenko (1927, 1930)
American Society of Mechanical Engineers
The American Society of Mechanical Engineers is a professional body, specifically an engineering society, focused on mechanical engineering....
(ASME). The AMD was founded in 1927, with Stephen Timoshenko
Stephen Timoshenko
Stanford University:* Bergman, E. O., * Kurzweil, A. C., * , * Huang, Y. S., * Wang, T. K., * Weber, H. S., * , * , * , -Publications:...
being the first chair. The current AMD membership is over 5000, out of about 90,000 members of the ASME. AMD is the largest of the six divisions in the ASME Basic Engineering Technical Group.
Mission
The mission of the Applied Mechanics Division is to foster fundamental research in, and intelligent application of, applied mechanicsApplied mechanics
Applied mechanics is a branch of the physical sciences and the practical application of mechanics. Applied mechanics examines the response of bodies or systems of bodies to external forces...
.
Summer Meeting
The Division participates annually in a Summer Meeting by programming Symposia and committee meetings. The principal organisers of the Summer Meetings rotate among several organizations, with a period of four years, as described below.- Year 4n (2008, 2012, etc.): International Committee of Theoretical and Applied Mechanics.
- Year 4n + 1 (2009, 2013, etc.): Materials Division of the ASME (joined with the Applied Mechanics Division of ASME, Engineering Mechanics of the American Society of Civil Engineers, and Society of Engineering Sciences).
- Year 4n + 2 (2006, 2010, etc.): National Committee of Theoretical and Applied Mechanics.
- Year 4n + 3 (2007, 2011, etc.): Applied Mechanics Division of the ASME (joined with Materials Division of ASME).
Publications
- Newsletters of the Applied Mechanics Division
- Journal of Applied Mechanics
- Applied Mechanics Reviews
Awards
- Timoshenko MedalTimoshenko MedalThe Timoshenko Medal is an award given annually by the American Society of Mechanical Engineers to an individual"in recognition of distinguished contributions to the field of applied mechanics."...
- Koiter MedalKoiter MedalThe Warner T. Koiter Medal was established in 1996 by the American Society of Mechanical Engineers. It is awarded in recognition of distinguished work in the field of solid mechanics....
- Drucker MedalDrucker MedalThe Daniel C. Drucker medal was instituted in 1997 by the Applied Mechanics Division of the American Society of Mechanical Engineers. The Drucker Medal is conferred in recognition of distinguished contributions to the fields of applied mechanics and mechanical engineering.The award is given in...
- Thomas K. Caughey Dynamics AwardThomas K. Caughey Dynamics AwardThe Thomas K. Caughey Dynamics Award is an award given annually by the Applied Mechanics Division, of American Society of Mechanical Engineers , "in recognition in recognition of an individual who has made significant contributions to the field of nonlinear dynamics through practice, research,...
- Ted Belytschko Applied Mechanics Award
- Thomas J.R. Hughes Young Investigator Award
Executive committee
The responsibility for guiding the Division, within the framework of the ASME, is vested in an Executive Committee of five members. The Executive Committee meets twice a year at the Summer Meeting and Winter Annual Meeting. Members correspond throughout the year by emails and conference calls. Three members shall constitute a quorum, and all action items must be approved by a majority of the Committee.Each member serves a term of five years, beginning and ending at the conclusion of the Summer Meeting, spending one year in each of the following positions:
- Secretary
- Vice-Chair of the Program Committee
- Chair of the Program Committee
- Vice-Chair of the Division
- Chair of the Division.
New members of the Executive Committee are sought from the entire membership of the Division. Due considerations are given to leadership, technical accomplishment, as well as diversity in geographic locations, sub-disciplines, and genders. At the Winter Annual Meeting each year, the Executive Committee nominates one new member, who is subsequently appointed by the ASME Council.
The executive committee has an additional non-rotating position, the Recording Secretary. The responsibility of the Recording Secretary is to attend and record minutes for the Executive Committee Meeting at the Summer and Winter Annual Meeting and the General Committee Meeting at the Winter Annual Meeting. The Recording Secretary serves a term of two years and is selected from the junior members (i.e. young investigators) of the AMD.
Technical Committees
The mission of a Technical Committee is to promote a field in Applied Mechanics. The principal approach for a Technical Committee to accomplish this mission is to organize symposia at the Summer and Winter Meetings. Technical Committees generally meet at the Winter Annual Meeting and the Summer Meeting; they may also schedule special meetings.There are 17 Technical Committees in the Applied Mechanics Division.
Technical Committees are established and dissolved by the Executive Committee.
Past chairs of the Applied Mechanics Division
Zhigang Suo (2010),Dan Inman (2009),
Ravi-Chandar (2008),
Thomas N. Farris (2007),
Wing Kam Liu (2006),
Mary C. Boyce (2005),
Pol Spanos (2004),
Stelios Kyriakides (2003),
Dusan Krajcinovic (2002),
Thomas J.R. Hughes
Thomas J.R. Hughes
Thomas J.R. Hughes is a Professor of Aerospace Engineering and Engineering Mechanics and holds the Computational and Applied Mathematics Chair III in the Institute for Computational Engineering and Sciences at the University of Texas at Austin...
(2001),
Alan Needleman
Alan Needleman
Alan Needleman was born in 1944 in Philadelphia, PA and is currently the Florence Pirce Grant University Professor of Mechanics of Solids and Structures at Brown University in Providence, RI. Professor Needleman received his B.S. from the University of Pennsylvania in 1966, a M.S. and Ph.D. from...
(2000),
Lallit Anand (1999),
Stanley A. Berger (1998),
Carl T. Herakovich (1997),
Thomas A. Cruse (1996),
John W. Hutchinson
John W. Hutchinson
John W. Hutchinson is a renowned scholar in the field of applied mechanics, and has made seminal contributions to the mechanics of structures and mechanics of materials. He is a recipient of the Timoshenko Medal...
(1995),
L.B. Freund (1994),
David B. Bogy (1993),
William S. Saric (1992),
Ted Belytschko
Ted Belytschko
Ted Bohdan Belytschko is an American mechanical engineer. He is Walter P. Murphy Professor and McCormick Professor of Computational Mechanics at Northwestern University. He works in field of computational solid mechanics and is known for development of methods like element-free Galerkin methods...
(1991),
Michael J. Forrestal (1990),
Sidney Leibovich (1989),
Thomas L. Geers (1988),
James R. Rice
James R. Rice
James Robert Rice is a mechanician who has made fundamental contributions to various aspects of solid mechanics. Two of his early contributions are the concept of the J-integral and an explanation of how plastic deformations localize in a narrow band. In recent years, Rice has focused on the...
(1987),
Michael M. Carroll (1986),
Jan D. Achenbach (1985),
Charles R. Steele (1984),
William G. Gottenberg (1983),
R.C. DiPrima (1982),
R.M. Christensen (1981),
R.S. Rivlin (1980),
Richard Skalak
Richard Skalak
Richard Skalak was a pioneer in biomedical engineering. He is known for his groundbreaking work in the mechanics of blood flow, bone growth, white blood cell response to infections, and biological implications and responses to implants...
(1979),
F. Essenburg (1978),
Yuan-Cheng Fung
Yuan-Cheng Fung
Yuan-Cheng "Bert" Fung is a scientist regarded as a founding figure of bioengineering, tissue engineering, and the "Founder of Modern Biomechanics".-Biography:Fung was born in Jiangsu Province, China in 1919...
(1977),
J. Miklowitz (1976),
B.A. Boley (1975),
George Herrmann (1974),
J. Kestin (1973),
Paul M. Naghdi (1972),
S. Levy (1971),
H.N. Abramson (1970),
Stephen H. Crandall
Stephen H. Crandall
Stephen Harry Crandall is professor emeritus of Mechanical Engineering at MIT. He joined the faculty of MIT in 1946 where he taught dynamics and strength of materials until his retirement in 1991 . He was a prolific author of texts in solid mechanics, numerical methods, and random vibration. ...
(1969),
P.G. Hodge, Jr. (1968),
R. Plunkett (1967),
M.V. Barton (1966),
George F. Carrier
George F. Carrier
George Francis Carrier was a mathematician and the T. Jefferson Coolidge Professor of Applied Mathematics Emeritus of Harvard University. He was particularly noted for his ability to intuitively model a physical system and then deduce an analytical solution...
(1965),
Daniel C. Drucker
Daniel C. Drucker
Daniel Charles Drucker was an authority on the theory of plasticity in the field of applied mechanics. He was awarded the Timoshenko Medal in 1983. He taught at Brown University from 1946 until 1968 when he joined the University of Illinois as Dean of Engineering...
(1964),
E. Reissner (1963),
A.M. Wahl (1961, 1962),
S.B. Batdorf (1960),
William Prager
William Prager
William Prager was a German-born US applied mathematician.He was a lecturer at Darmstadt, a deputy director at University of Göttingen, professor at Karlsruhe, University of Istanbul, the University of California, San Diego and Brown University, where he advised Bernard Budiansky.The Society of...
(1959),
W. Ramberg (1958),
M. Hetenyl (1957),
Raymond D. Mindlin
Raymond D. Mindlin
Raymond David Mindlin was a mechanician who made seminal contributions to many branches of applied mechanics, applied physics, and engineering sciences.-Education:...
(1956),
N.H. Hoff (1955),
N.M. Newmark (1954),
D. Young (1953),
R.E. Peterson (1952),
L.H. Donnell (1951),
R.P. Kroon (1950),
M. Golan (1949),
W.M. Murray (1948),
H.W. Emmons (1947),
H. Poritsky (1946),
J.N. Goodier (1945),
J.H. Keenan (1943, 1944),
J.L. Dryden (1942),
J.P. Den Hartog (1940, 1941),
C.R. Soderberg (1937,1938),
E.O. Waters (1936),
J.A. Goff (1935),
F.M. Lewis (1934),
J.M. Lessells (1933),
G.B. Pegram (1932),
A.L. Kimball (1931),
G.M. Eaton (1928, 1929),
Stephen P. Timoshenko (1927, 1930)
Relevant websites
- Homepage of Applied Mechanics Division
- iMechanica.org, a web of mechanics and mechanicians.