Architectural light shelf
Encyclopedia
A light shelf is an architectural element
that allows daylight
to penetrate deep into a building. This horizontal light-reflecting overhang is placed above eye-level and has a high-reflectance upper surface. This surface is then used to reflect daylight onto the ceiling and deeper into a space.
Light shelves are typically used in high-rise and low-rise office buildings, as well as institutional buildings. This design is generally used on the equator-facing side of the building, which is where maximum sunlight is found, and as a result is most effective. Not only do light shelves allow light to penetrate through the building, they are also designed to shade near the windows, due to the overhang of the shelf, and help reduce window glare. Exterior shelves are generally more effective shading devices than interior shelves. A combination of exterior and interior shelves will work best in providing an even illumination gradient.
point system, falling under the “Indoor Environment Quality: Daylight & Views” category.
The fact that light shelves extend a fair distance into a room may result in interference with sprinkler systems. In Canada, they cannot exceed 1200 mm (4 ft.) in width if sprinklers are present or the design will require integration with sprinkler system to cover the floor area under the light shelf. They also require a higher than average floor-to-ceiling heights in order for them to be effective, or daylight may be inadvertently redirected into occupants' eyes.
The distance into a space that light is cast is variable depending on both the time of day and the time of year.
Light Shelves also increase maintenance requirements and window covering
s must be coordinated with light shelf design.
Blinds reduce solar gain, but do little to redirect light into the interior space.
Exterior louver systems often rely on adjustments from either complex servo motors or building occupants throughout the day to operate well. Both of these systems can be unreliable at times, reducing the overall benefit of having a daylighting system.
Some newer products have found solutions to many of these problems. Products like LightLouver, which are hung on the inside of overhead windows, use fixed louvers with a complex geometry to redirect incoming daylight above 5° onto an interior ceiling. The effect is much like that of a light shelf, only with much more consistent illumination.
Architecture
Architecture is both the process and product of planning, designing and construction. Architectural works, in the material form of buildings, are often perceived as cultural and political symbols and as works of art...
that allows daylight
Daylight
Daylight or the light of day is the combination of all direct and indirect sunlight outdoors during the daytime. This includes direct sunlight, diffuse sky radiation, and both of these reflected from the Earth and terrestrial objects. Sunlight scattered or reflected from objects in outer space is...
to penetrate deep into a building. This horizontal light-reflecting overhang is placed above eye-level and has a high-reflectance upper surface. This surface is then used to reflect daylight onto the ceiling and deeper into a space.
Light shelves are typically used in high-rise and low-rise office buildings, as well as institutional buildings. This design is generally used on the equator-facing side of the building, which is where maximum sunlight is found, and as a result is most effective. Not only do light shelves allow light to penetrate through the building, they are also designed to shade near the windows, due to the overhang of the shelf, and help reduce window glare. Exterior shelves are generally more effective shading devices than interior shelves. A combination of exterior and interior shelves will work best in providing an even illumination gradient.
Benefits
Architectural light shelves have been proven to reduce the amount of artificial lighting in a building. Since they can reflect light deeper into a space, the use of incandescent and fluorescent lighting can be reduced or completely eliminated, depending on the space. Light shelves make it possible for daylight to penetrate the space up to 2.5 times the distance between the floor and the top of the window. Today, advanced light shelf technology makes it possible to increase the distance up to 4 times. In spaces such as classrooms and offices, light shelves have been proven to increase occupant comfort and productivity. Furthermore, incorporating light shelves in a building design is admissible for the LEEDLeadership in Energy and Environmental Design
Leadership in Energy and Environmental Design consists of a suite of rating systems for the design, construction and operation of high performance green buildings, homes and neighborhoods....
point system, falling under the “Indoor Environment Quality: Daylight & Views” category.
Limitations
Light shelves may not be suitable for all climates. They are generally used in mild climates and not in tropical or desert climates due to the intense solar heat gain. These hot climates, compared to mild climates, require very small window openings to reduce the amount of heat infiltration.The fact that light shelves extend a fair distance into a room may result in interference with sprinkler systems. In Canada, they cannot exceed 1200 mm (4 ft.) in width if sprinklers are present or the design will require integration with sprinkler system to cover the floor area under the light shelf. They also require a higher than average floor-to-ceiling heights in order for them to be effective, or daylight may be inadvertently redirected into occupants' eyes.
The distance into a space that light is cast is variable depending on both the time of day and the time of year.
Light Shelves also increase maintenance requirements and window covering
Window covering
Window coverings are material used to cover a window to manage sunlight, to provide additional weatherproofing, to ensure privacy or for purely decorative purposes....
s must be coordinated with light shelf design.
Alternatives
Alternatives to light shelves for window daylighting include blinds and louver systems, both of which can be interior or exterior.Blinds reduce solar gain, but do little to redirect light into the interior space.
Exterior louver systems often rely on adjustments from either complex servo motors or building occupants throughout the day to operate well. Both of these systems can be unreliable at times, reducing the overall benefit of having a daylighting system.
Some newer products have found solutions to many of these problems. Products like LightLouver, which are hung on the inside of overhead windows, use fixed louvers with a complex geometry to redirect incoming daylight above 5° onto an interior ceiling. The effect is much like that of a light shelf, only with much more consistent illumination.