Breda 30
Encyclopedia
The Fucile Mitragliatore Breda modello 30 was the standard light machine gun
Light machine gun
A light machine gun is a machine gun designed to be employed by an individual soldier, with or without an assistant, as an infantry support weapon. Light machine guns are often used as squad automatic weapons.-Characteristics:...

 of the Royal Italian Army
Royal Italian Army
The Regio Esercito was the army of the Kingdom of Italy from the unification of Italy in 1861 to the birth of the Italian Republic in 1946...

 during World War II
World War II
World War II, or the Second World War , was a global conflict lasting from 1939 to 1945, involving most of the world's nations—including all of the great powers—eventually forming two opposing military alliances: the Allies and the Axis...

.

The Breda 30 was rather unique for a light machine gun. It is magazine fed from the right side and the magazine was attached to the gun and was loaded using brass or steel 20 round stripper clips. If the magazine or its hinge/latch were damaged the gun became useless. It also fires from a closed bolt, along with using blowback for its action. Blowback operation can be violent, with poor primary extraction. Primary extraction, the initial very small rearward movement of the hot expanded cartridge case away from the chamber's walls must be powerful but very slow, if an automatic weapon is to be reliable. Separated cases, jamming the gun beyond field clearing, are the usual consequence of poor primary extraction. As an automatic weapon's chamber and barrel heat up, with rapid fire it gets very hot, and as the round is chambered it can "[cook off]" (fire), to the surprise of the gunner. The M30 was designed without good primary extraction, and thus utilized a small lubrication device that oiled each cartridge as it entered the chamber. With the dust of the deserts of northern Africa came a combination of wear and jamming.

Some Bredas were re-designated as the M37
Breda M37
The Breda Modello 37 was an Italian heavy machine gun adopted in 1937. It was the standard machine gun for the Royal Italian Army during World War II...

after being modified to accept the new 7.35 mm cartridge, which the Italian Military was making an effort to adopt; however, this was short-lived as slowed production never allowed full adoption of the new cartridge. The Breda 30 was also mounted on a number of Italian armored fighting vehicles.

In regular Army units, one Breda 30 was issued each two squads, although this was later changed to one weapon per squad; an Italian infantry company would therefore have four to eight light machine guns in the first part of the war, but up to twelve in the latter part. Due to the importance of its extra firepower, the Breda 30 was most often given to the squad's most reliable soldier (unlike other armies of the time, it was not rare to see an NCO brandishing himself the squad's automatic weapon). The gunner normally had an assistant who would carry extra ammunition.

The Wehrmacht adopted the Breda 30 in small numbers after the occupation of Northern and Central Italy, after the Italian armistice of 1943, using the nomenclature MG 099(i); it was used in the same role as the MG 34, as a light machine gun, predominantly in the Italian Campaign
Italian Campaign (World War II)
The Italian Campaign of World War II was the name of Allied operations in and around Italy, from 1943 to the end of the war in Europe. Joint Allied Forces Headquarters AFHQ was operationally responsible for all Allied land forces in the Mediterranean theatre, and it planned and commanded the...

 battlefields.

Battlefield performance

Although distinctive in appearance, the Breda 30 is widely viewed as a poorly designed weapon. It had a slow rate of fire, low magazine capacity, used the underpowered and unreliable 6.5x52mm cartridge and was highly prone to jamming. The oiling system quickly picked up dust and debris, making the weapon unreliable in combat conditions.

The Breda also lacked a handle for changing the barrel, and the rear and fore sight were both on the gun body, so only one barrel could be zeroed. The magazine was loaded using 20 round stripper clips, which were known to be fragile, especially in combat conditions. In Northern Africa the weapon was nearly unusable: desert sand and dust caused the weapon to jam continuously. The oil from the lubrication necessary to fire the Breda exacerbated its flaws. In the Balkans, Russian Campaign and other theatres of war the weapon achieved slightly better results.

Low magazine capacity, frequent jamming and the complicated barrel-change made firing and reloading a slow and laborious process, resulting in the Breda 30 being a weapon only capable of laying down a diminutive amount of firepower and making it a very modest contributor to a firefight. When considering all of the gun's deficiencies, taken during combat when it was at its worst, the practical rate of fire of the Breda 30 could even have been comparable to a semi-automatic weapon's practical rate of fire, as the standard American rifle was (the M1 Garand
M1 Garand
The M1 Garand , was the first semi-automatic rifle to be generally issued to the infantry of any nation. Called "the greatest battle implement ever devised" by General George S...

).

Although considerably flawed when compared to its contemporaries, the Breda 30 was still considered the deadliest weapon of the standard Italian infantryman's arsenal, since heavy machine guns were seen in relatively small numbers and submachine guns were very rare. The Breda 30 along with the Carcano M91 rifle made up the backbone of the Italian infantry armament during the Second World War. Field reports on the weapon were of mixed nature: the Breda's very slow rate of fire often resulted in a turning of the tide during a firefight against Italian soldiers; however, the Breda 30, in most occasions, was the fastest and most helpful weapon available. The Italian army attempted to counter the Breda's defects by stressing the importance of the loader's role: every soldier was trained to eventually be a Breda 30 loader and taught how to rapidly feed one ammunition strip after another (this was not always possible, as with Breda 30s mounted on motorcycles). Careful polishing was also carried out frequently with extra attention being paid to Breda's lubricantion system and ammunition availability.

External links

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK