Cambridge Branch
Encyclopedia
The Cambridge Branch, also known as the Cambridge Industrial Line and now named the Hautapu Industrial Siding is a rural railway line in Waikato
, New Zealand
.
A kilometre south of the Newstead Station a five span timber bridge was needed to cross the Mangaonua Stream, and a contract to lay the permanent way over the full distance was let on 21 February 1884 at the price of £5,455.
On the morning of 1 October 1884 the line was inspected and passed ready for traffic. On 6 October a special train brought the new station master and his family along with other members of the staff to Cambridge and two days later the line was open for traffic.
Railway infrastructure originally included a Class 3 station building, goods shed and crane, locomotive shed, turntable and stockyards. The rail yard consisted of main line, crossing loop, four sidings, goods shed siding, backshunt, turntable and locomotive depot, stockyard and private sidings.
Cambridge yard was protected by both 'Home' and 'Distant' semaphore signals controlled via gainstock levers located at the station building. Four NZR built railway staff houses were also located on Queen Street bordering the railyards.
The locomotive depot was removed at some point during the 1920s but the turntable remained and was occasionally used until the early 1970s when it was dismantled and filled in. During the 1940s construction of the Karapiro Dam and Hydro scheme (9 km east of Cambridge) necessitated the construction of a new siding and Public Works building in the yard site.
Heavy materials, machinery, steel and cement used in the construction of the dam were railed direct to Cambridge and then transported further by truck to Karapiro.
This new siding left the Main just within the Home Signal boundary and passed along the outer limits parallel to the yard to the large Public Works warehouse.
Various private sidings were also used for the carriage of sawn timber, wood and wool products by local industries.
The station yard employed a mixture of 'Wynn-Williams' spring-loaded points, lockable switch points, ground-throw turnouts and also had trap-points/de-railers located on and protecting both the Public Works Siding, Crossing Loop and Number One Siding.
The old station building was sold and broken up in 1973 and an overhead crane was erected in its place to handle container traffic from Weddell Crown Aotearoa freezing works in Leamington.
With the removal of the station building administration was subsequently moved and conducted from an office added to the Goods Shed.
As a result both the 'Home' and 'Distant' signals were fixed in the stop position.
In the late 1970s following the removal of the stockyards the stockyard site was used for the washing and drying of N.Z.R tarpaulins on purpose built drying racks.
Newstead was the first station located on the branchline after leaving the East Coast Main Trunk.
It originally had a platform and shelter type station building, crossing loop and one siding.
Owing to the demise of passenger traffic and increase in road cartage of goods the station was removed although the loop was used at times to store retired wagons even into the 1980s.
Tamahere (later renamed Matangi) was once an important station on the branchline with a large dairy factory requiring both inwards consignments of coal and also supplying outwards dairy freight.
The station yard included a crossing loop, 3 sidings, Goods Shed siding and also a siding for the dairy factory.
Bruntwood was the site of a dairy factory and had a siding curving off the branch mainline and into the factory site.
Previously the last station before Cambridge and current terminus of the railway.
Hautapu has had a dairy factory since the 1880s and has a long tradition with using rail for outbound freight movement.
The railway line intersects through the middle of the factory grounds and it is this convenience that has ultimately insured the lines survival.
In the late 1980s expansions to the dairy factory and the construction of a new bulk refrigerated storage facility required the branch 'Main' to be diverted and new rail sidings built.
Hautapu railyard comprises the Main line, elongated loop, three sidings, backshunt and 'Cool Store' siding with rail access on either side of the building.
The Hautapu factory currently still generates enough traffic to justify regular services and two trains daily in peak dairy season.
with services on the North Island Main Trunk.
There were dairy factories located at Matangi and Bruntwood (Fencourt) and Hautapu requiring inwards supplies and sending outwards goods.
During the 1920s, motor vehicles started to take over the passenger traffic and the last time-tabled passenger train left Cambridge without ceremony on 9 September 1946.
At one stage a loading bank for the Cambridge Raceway was located on the branch Main, adjacent to the racetrack grounds near the Taylor Street level-crossing, for the loading and unloading of race horses on important race days.
Freight traffic continued with common goods carried including wood, coal, wool, meat, cars, fertiliser and grain.
In 1973 a gantry-type container crane was erected in the station yard for the truck to train transition of containerised refrigerated meat from the Weddell Crown freezing works in Leamington.
With the closure of the freezing works in 1993 the traffic originating from Cambridge declined with the only remaining customer being Summit Grains. Summit Grains occupied the former Public Works warehouse in the station yard and used rail for inbound shipments of bulk grain and horsefeed until early 1999 when the section from Hautapu to Cambridge was officially closed and subsequently lifted and removed.
In 1942 a top-secret fuel storage facility consisting of a bulk fuel tank,underground pipelines and tunnels codenamed 'AR-9' was built in the area directly adjacent and below the rail yards beside Lake Te Ko-outu. This RNZAF facility was designed to stockpile aircraft fuel for use by the airforce at Rukuhia south of Hamilton. With the very real threat of Japanese invasion it was constructed in secrecy with tank trains reportedly unloading fuel at night.
By the 1940s the B and Bb Class engines were prevalent and by the 1950s the AB
class 4-6-2 was the main loco employed on Cambridge Branch trains. With the dieselization of the New Zealand Railways network in the late 1950s and 1960s a mix of steam and diesel motive power became common.
In the 1970s the main locomotives working the Cambridge Branch were diesels of the classes DI
, DB
and DSC
. By the 1980s and through the 1990s until the Hautapu-Cambridge sections closure, the majority of trains were pulled by DBR class engines. At various times a small shunting engine of the class TR
was used to perform various shunting duties and was housed in the Goods Shed at Cambridge. All trains that currently use the line to Hautapu are DBR hauled.
VTNZ
currently has its testing station located in the grounds of the old rail yard. All evidence of the railway yard has been erased with exception of a loading bank, the stockyard platform and the remains of the locomotive inspection pit on the site of the old loco depot.
Waikato
The Waikato Region is a local government region of the upper North Island of New Zealand. It covers the Waikato, Hauraki, Coromandel Peninsula, the northern King Country, much of the Taupo District, and parts of Rotorua District...
, New Zealand
New Zealand
New Zealand is an island country in the south-western Pacific Ocean comprising two main landmasses and numerous smaller islands. The country is situated some east of Australia across the Tasman Sea, and roughly south of the Pacific island nations of New Caledonia, Fiji, and Tonga...
.
Overview
The Cambridge Branch Line stretched from Ruakura Junction for 19.27 km to the town of Cambridge. It had 5 stations situated along its length at Newstead, Matangi (Tamahere), Bruntwood (Fencourt), Hautapu and the terminus at CambridgeHistory
In the late 1870s the need for a railway line to the flourishing town of Cambridge had been noted. Preliminary surveying was conducted in 1881. The line starts at Ruakura Junction on the East Coast Main Trunk, where the first sod was turned in the line's construction on 6 May 1882.A kilometre south of the Newstead Station a five span timber bridge was needed to cross the Mangaonua Stream, and a contract to lay the permanent way over the full distance was let on 21 February 1884 at the price of £5,455.
On the morning of 1 October 1884 the line was inspected and passed ready for traffic. On 6 October a special train brought the new station master and his family along with other members of the staff to Cambridge and two days later the line was open for traffic.
Cambridge railway yard
The Cambridge railway yard was located on a tract of land between Queen Street and Lake Te Ko-outu and crossed at its entrance by Lake Street.Railway infrastructure originally included a Class 3 station building, goods shed and crane, locomotive shed, turntable and stockyards. The rail yard consisted of main line, crossing loop, four sidings, goods shed siding, backshunt, turntable and locomotive depot, stockyard and private sidings.
Cambridge yard was protected by both 'Home' and 'Distant' semaphore signals controlled via gainstock levers located at the station building. Four NZR built railway staff houses were also located on Queen Street bordering the railyards.
The locomotive depot was removed at some point during the 1920s but the turntable remained and was occasionally used until the early 1970s when it was dismantled and filled in. During the 1940s construction of the Karapiro Dam and Hydro scheme (9 km east of Cambridge) necessitated the construction of a new siding and Public Works building in the yard site.
Heavy materials, machinery, steel and cement used in the construction of the dam were railed direct to Cambridge and then transported further by truck to Karapiro.
This new siding left the Main just within the Home Signal boundary and passed along the outer limits parallel to the yard to the large Public Works warehouse.
Various private sidings were also used for the carriage of sawn timber, wood and wool products by local industries.
The station yard employed a mixture of 'Wynn-Williams' spring-loaded points, lockable switch points, ground-throw turnouts and also had trap-points/de-railers located on and protecting both the Public Works Siding, Crossing Loop and Number One Siding.
The old station building was sold and broken up in 1973 and an overhead crane was erected in its place to handle container traffic from Weddell Crown Aotearoa freezing works in Leamington.
With the removal of the station building administration was subsequently moved and conducted from an office added to the Goods Shed.
As a result both the 'Home' and 'Distant' signals were fixed in the stop position.
In the late 1970s following the removal of the stockyards the stockyard site was used for the washing and drying of N.Z.R tarpaulins on purpose built drying racks.
Other Stations
The following stations were located on the Cambridge Branchline with distances in kilometers measured from Ruakura Junction.Newstead (2.57km)
Newstead was the first station located on the branchline after leaving the East Coast Main Trunk.
It originally had a platform and shelter type station building, crossing loop and one siding.
Owing to the demise of passenger traffic and increase in road cartage of goods the station was removed although the loop was used at times to store retired wagons even into the 1980s.
Matangi (7.47km)
Tamahere (later renamed Matangi) was once an important station on the branchline with a large dairy factory requiring both inwards consignments of coal and also supplying outwards dairy freight.
The station yard included a crossing loop, 3 sidings, Goods Shed siding and also a siding for the dairy factory.
Bruntwood (12.88km)
Bruntwood was the site of a dairy factory and had a siding curving off the branch mainline and into the factory site.
Hautapu (15.08km)
Previously the last station before Cambridge and current terminus of the railway.
Hautapu has had a dairy factory since the 1880s and has a long tradition with using rail for outbound freight movement.
The railway line intersects through the middle of the factory grounds and it is this convenience that has ultimately insured the lines survival.
In the late 1980s expansions to the dairy factory and the construction of a new bulk refrigerated storage facility required the branch 'Main' to be diverted and new rail sidings built.
Hautapu railyard comprises the Main line, elongated loop, three sidings, backshunt and 'Cool Store' siding with rail access on either side of the building.
The Hautapu factory currently still generates enough traffic to justify regular services and two trains daily in peak dairy season.
Operation
In the early days regular services on the Cambridge branch were mixed (passenger and freight), stopping where or when required. The exception was the midday train which carried passengers only. Connections were made at Frankton JunctionFrankton Junction
Frankton Junction is the name of the canal junction where the Montgomery Canal terminates and meets the Llangollen Canal at Lower Frankton, Shropshire, England.-Bridge numbering:...
with services on the North Island Main Trunk.
There were dairy factories located at Matangi and Bruntwood (Fencourt) and Hautapu requiring inwards supplies and sending outwards goods.
During the 1920s, motor vehicles started to take over the passenger traffic and the last time-tabled passenger train left Cambridge without ceremony on 9 September 1946.
At one stage a loading bank for the Cambridge Raceway was located on the branch Main, adjacent to the racetrack grounds near the Taylor Street level-crossing, for the loading and unloading of race horses on important race days.
Freight traffic continued with common goods carried including wood, coal, wool, meat, cars, fertiliser and grain.
In 1973 a gantry-type container crane was erected in the station yard for the truck to train transition of containerised refrigerated meat from the Weddell Crown freezing works in Leamington.
With the closure of the freezing works in 1993 the traffic originating from Cambridge declined with the only remaining customer being Summit Grains. Summit Grains occupied the former Public Works warehouse in the station yard and used rail for inbound shipments of bulk grain and horsefeed until early 1999 when the section from Hautapu to Cambridge was officially closed and subsequently lifted and removed.
Wartime traffic
The Cambridge Branch Line played a small part during World War Two for the transport of bulk aircraft fuel.In 1942 a top-secret fuel storage facility consisting of a bulk fuel tank,underground pipelines and tunnels codenamed 'AR-9' was built in the area directly adjacent and below the rail yards beside Lake Te Ko-outu. This RNZAF facility was designed to stockpile aircraft fuel for use by the airforce at Rukuhia south of Hamilton. With the very real threat of Japanese invasion it was constructed in secrecy with tank trains reportedly unloading fuel at night.
Motive power
Like all New Zealand branchlines in the 1880s the Cambridge Line was first serviced by small tank engines. Due to axle-load and weight restrictions imposed by both rail weight and the Mangaonua Steam bridge, mainline locomotives have always been forbidden to operate on the line.By the 1940s the B and Bb Class engines were prevalent and by the 1950s the AB
NZR Ab class
The NZR AB class was a class of 4-6-2 Pacific tender steam locomotive that operated on New Zealand's national railway system. Originally an improvement on the 1906 A class, 141 were built between 1915 and 1927 by NZR's Addington Workshops, A & G Price Limited of Thames, New Zealand, and North...
class 4-6-2 was the main loco employed on Cambridge Branch trains. With the dieselization of the New Zealand Railways network in the late 1950s and 1960s a mix of steam and diesel motive power became common.
In the 1970s the main locomotives working the Cambridge Branch were diesels of the classes DI
NZR DI class
The DI class locomotive was a class of diesel-electric locomotive in New Zealand. They were built by English Electric Australia. The class is very similar to the Queensland Rail 1620 Class...
, DB
NZR DB class
The NZR Db diesel-electric locomotive class was built in 1965-1966. They were a lighter version of the Da class to operate on secondary North Island lines from which the Da was excluded due to its weight. One of the principal lines which the Db dominated was the East Coast Main Trunk to Tauranga...
and DSC
NZR DSC class
The NZR DSC class is a heavy shunting locomotive used throughout New Zealand. The class was built in seven batches, the first 18 locomotives being built by British Thomson-Houston of the United Kingdom, with the remainder being built by New Zealand Railways....
. By the 1980s and through the 1990s until the Hautapu-Cambridge sections closure, the majority of trains were pulled by DBR class engines. At various times a small shunting engine of the class TR
NZR TR class
The NZR TR class is a class of diesel shunting locomotives built by many different manufacturers. Many of these locomotives have been withdrawn, but some are still in service. The first locomotives of this class were built by the Drewry Car Co in 1936, and had 52 kW or 90 kW petrol engines...
was used to perform various shunting duties and was housed in the Goods Shed at Cambridge. All trains that currently use the line to Hautapu are DBR hauled.
Cambridge railway yard today
In the following months after the closure of the Hautapu-Cambridge section of line in 1999 all the yard and line tracks were quickly lifted and Goods Shed dismantled. The Samson Post was moved to the new terminus of the line at Hautapu. The 'Home' semaphore signal remained in position until being moved to the grounds of the Cambridge Museum where it is currently on display along with the 18 km and 19 km distance markers. The 'Cambridge' sign marking the entrance to the yard and also the 'Kissing Gates' of 1884 vintage remain preserved in place. The line formation is still very evident as a vacant plot of land stretching in a straight line to Hautapu for 4 km between Victoria Road East and Victoria Road West and tree-lined within the town boundary.VTNZ
VTNZ
VTNZ is a company based in Wellington, New Zealand that carries out government-mandated Warrant of Fitness and other inspections of motor vehicles. It is the largest vehicle inspection company in New Zealand....
currently has its testing station located in the grounds of the old rail yard. All evidence of the railway yard has been erased with exception of a loading bank, the stockyard platform and the remains of the locomotive inspection pit on the site of the old loco depot.