Compressed Air and Gas Institute
Encyclopedia
Compressed Air and Gas Institute or CAGI is an industry
association
located in Cleveland, Ohio
. It was founded in 1915. CAGI is representing manufacturers of compressed air
system equipment, including air compressor
s, blower
s, pneumatic tools and air and gas drying
and filtration
equipment.
Among its activities is development of standards for compressors, compressor-related testing, air dryers, filters and portable air tools, many prepared and updated in coordination with
other standards organizations, including Pneurop
and the American National Standards Institute
.
Industry
Industry refers to the production of an economic good or service within an economy.-Industrial sectors:There are four key industrial economic sectors: the primary sector, largely raw material extraction industries such as mining and farming; the secondary sector, involving refining, construction,...
association
Trade association
A trade association, also known as an industry trade group, business association or sector association, is an organization founded and funded by businesses that operate in a specific industry...
located in Cleveland, Ohio
Cleveland, Ohio
Cleveland is a city in the U.S. state of Ohio and is the county seat of Cuyahoga County, the most populous county in the state. The city is located in northeastern Ohio on the southern shore of Lake Erie, approximately west of the Pennsylvania border...
. It was founded in 1915. CAGI is representing manufacturers of compressed air
Compressed air
Compressed air is air which is kept under a certain pressure, usually greater than that of the atmosphere. In Europe, 10 percent of all electricity used by industry is used to produce compressed air, amounting to 80 terawatt hours consumption per year....
system equipment, including air compressor
Air compressor
An air compressor is a device that converts power into kinetic energy by compressing and pressurizing air, which, on command, can be released in quick bursts...
s, blower
Blower
Blower may refer to:* USS Blower , a submarine of the United States Navy* a ducted centrifugal fan, especially when used in a heating, ventilating, and air-conditioning system* a supercharger on an internal-combustion engine...
s, pneumatic tools and air and gas drying
Drying
Drying is a mass transfer process consisting of the removal of water or another solvent by evaporation from a solid, semi-solid or liquid. This process is often used as a final production step before selling or packaging products. To be considered "dried", the final product must be solid, in the...
and filtration
Filtration
Filtration is commonly the mechanical or physical operation which is used for the separation of solids from fluids by interposing a medium through which only the fluid can pass...
equipment.
Among its activities is development of standards for compressors, compressor-related testing, air dryers, filters and portable air tools, many prepared and updated in coordination with
other standards organizations, including Pneurop
Pneurop
Pneurop is a lobbying group for the European compressor and vacuum pump industry.It is a committee of manufacturers of air and process gas compressors, vacuum pumps, pneumatic tools and allied equipment, represented by their national trade associations...
and the American National Standards Institute
American National Standards Institute
The American National Standards Institute is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States. The organization also coordinates U.S. standards with international...
.