Datsun 720
Encyclopedia
The popular and economical Datsun/Nissan
compact pickup truck was produced in Japan
from 1955 and imported to the United States
, Australia
, Finland
, the Middle East
, South Africa, and various European countries. Modern versions of this vehicle are still in production around the world, currently known as the Frontier & Navara.
engine with a 4-speed floor shift (column shift for the 123) manual transmission. During its 3 years in production three models were built: 120 (Jan. to Dec. 1955), 122 (Dec. 1955 to May 1956) and 123 (Jun. 1956 to Sep. 1957). For reasons unknown, Nissan skipped the 121 designation. The 120 series was based on the Datsun 110 series. Delivery van, panel van (120 only), and double cab versions were available.
, and the 48 hp Nissan E engine
. The E engine was used in models sold on the export market. The 223 was powered by a new engine, the Nissan E-1
, rated at 60 hp. The 220 was the first Datsun truck to be equipped with a 12 volt electrical system. Double cab and delivery van versions were available. Side badges were "Datsun 1000" or "Datsun 1200". The 223 also had a round "60 HP" badge. There was also a round badge on the dashboard that said "Datsun 1000" or "Datsun 1200", depending on the engine. The 223 had a revised chassis and suspension system. The front I-beam suspension used on the 220, 221 and 222 was replaced with an independent front suspension with torsion bars. A low cost option, the Datsun 124, was introduced in October 1957 followed by the Datsun 125 in 1959 and finally the Datsun 126 in 1960. The 124 was powered by the Nissan D10
, while the 125 and 126 were powered by an improved version of the D10, called the B-1 (rated at 27 hp).
1958, exhibited at the Los Angeles Auto Show. It was exported to America soon after. It was the 220 series that established Datsun in the American market.
. This engine produced 60 hp.
All Datsun trucks kept the A-arm torsion bar front suspension with leaf spring rear ends and had 1/2 ton load capacity. Rear end gearing was a low 4.875:1 along with a 4 speed transmission, as a result, the 320 was not freeway friendly above 60mph. Fender emblems showed "Datsun 1200" and "60 HP" with a "Datsun" emblem on the front nose of the hood.
Vehicle type, SINGLECAB "truck" (320), longer wheelbase
SINGLECAB track (G320), DOUBLECAB "pickup" (U320), 2-door, "light-van" (V320). Though described as a van, it also resembles a 2-door SUV, an appearance approach that was internationally introduced in 1986 with the Nissan Pathfinder
.
The 320 came in two cab and bed versions. The NL320 "Sport Pick-Up" (1963-65) variation was a rarer (1000 produced) UNI-BODY construction with the cab and bed one piece. Its back half was greatly different than the standard separated bed model 320 pick-up.
Bed and luggage space were in addition to the expansion, with the support of the market characteristics and the robust chassis engine was easy to handle, it was a best seller in the truck market segment.
The chassis was also a sales hit 310 in the reinforcement of the type Datsun Bluebird 310, a variation of the same series, in which the X-members plus a reinforcement of the Fairlady roadster
of the S310-type CSP311. It was also used for the new Silvia
coupe.
In 1964, minor changes, and competitors from Toyota called the Hilux
and Mazda called the Mazda B-Series
.
. In 1965 and 1966 the 520 had 2 headlights. In 1967, the 520 was slightly redesigned and had 4 headlights. This design was carried on until the end of 520 production. Single cab (520), LWB Single cab (G520), Double cab (U520) and delivery van (V520) versions were available. The fender emblems said "Datsun 1300". A grille emblem was added in 1966 and simply said "D".
The 521 was the minor changed version of 520, with Flat-deck style. It used the Nissan J engine
(the J15, rated at 77 hp) and later had an Nissan L16
engine, with a straight rear axle and somewhat resembled a Datsun 510
from the front. The fender emblems said "Datsun 1500" or "Datsun 1600" (depending on engine). Van/delivery van (V521) and double cab (U521) versions were available. It was manufactured from 1969–1972, preceded by the 520 and followed by the 620. The 521 was the first compact half-ton pickup sold in the American market, in 1968.
.
The 1972-1973 models were powered by the L16 engine
(96 hp), the 1974 model used the L18 engine
(100 hp), and the 1975-1979 models used the L20B engine
(110 hp). In overseas markets the 620 was equipped with the J15
. The standard transmissions were the F4W63 4-speed (1972-1973) and F4W71 4-speed (1974-1979). In 1977, the optional FS5W71B 5-speed transmission became available. The 3N71
3-speed automatic became available as an option in mid-1972. This was the first series to offer an automatic transmission as an option (all model series before the 620 only had manual transmissions). Final drive gearing was 4.375:1. Side badges were "DATSUN 1600" or simply "DATSUN". The grille badge was two colored stripes (one red and one blue, respectively) behind the word "DATSUN". Nissan continued the strong rhythms and styling of its previous vehicles, with a shoulder "wing line" or "Bullet Side" accent running alongside the vehicle. The 620 was known for its durability and weather resistance despite its small size along with an engine known for reliability. As a result, the 620 was competing with the larger American pickup trucks, which in turn gave Datsun a strong reputation in Cape town
A number of innovations were introduced with the 620: first long-bed (1975), first extended-cab (1977), front disc brakes (1978), and electronic ignition (1978).
The 620 was redesigned slightly for 1978, with changes to grille and front bumper.
was also available as an aftermarket conversion by a company called Matrix3. This was available as a "dealer option" from 1984-1986 and was called the Bushmaster. In Mid-1986 a factory-built version was introduced and was named Pathfinder
. Other US model variations besides KC (King Cab) were the GL (long bed), DX (deluxe), ST (sport truck aka "Li'l Hustler" shortbed) and Cab-and-Chassis models (2wd only).
The 720 was manufactured in the newly built Smyrna, Tennessee plant from 1983.5 to 1986.
Early (1980–1983) models had single wall beds with outside rolled lips and rope ties, 2 faux hood vents (some had real vents), and tail lights on the lower rear valance (similar to the 620).
For a limited period, 1983.5-1984 models built in the USA had the single wall beds with rope ties, yet used tail lights on the rear bed corners with amber turn signals over the red stop/tail lights while the backup lights remained under the tailgate. The front end underwent transformation as well, with a larger grill, bumper, and corner lights. There was also a revised dashboard with round instead of square gauges. At the same time, the regular cab was lengthened slightly and the air extractor vents behind the cab doors changed from the high "flag" look to long, narrow ones that matched the height of the window opening. The cab of King Cabs was unchanged.
Finally, the late model trucks produced from 1985 - 1986.5 (first half) utilized double wall, smooth sided beds, with revised tail lights on the corners which resembled those on Chevrolet/GMC S-series trucks. Some overseas models continued with the early style beds. Model years 1986.5 (second half) and later were called Nissan Hardbody Truck
s, chassis code D21.
In most other parts of the world, one could purchase a 4-door cab version of the 720, but such trucks are rare and were never sold in the US.
The Datsun 720 was available in both 2WD and 4WD
configurations, the latter having a divorced transfer case. The 2WD King Cabs had a 2-piece driveshaft with the center support bearing.
In 1979.5 and 1980, models were powered by Datsun's 2.0L carbureted L20B engine, but soon after switched to the Nissan NAPS-Z engine
line for 1981 (Z20S). In the Middle East it was powered by Datsun's 1.8 L carbureted L18 engine. The 1981-1982 models used the Z22 carbureted 2.2 L engine and an optional SD22 diesel of the same displacement. In mid-1983 Nissan introduced the Z24 2.4 liter twin spark four-cylinder motor, producing 103 hp, 2.3 L SD23 OHV diesel four, and the SD25 diesel; this happened at the same time that the 720 series was marketed as a Nissan (the Datsun name, which had disappeared entirely after 1984, was now only seen below the Nissan name on the left corner of the tailgate). In the American market the diesel engine was only available in the 2WD 720 (from 1982 to 1985). The Z24 was upgraded to Z24i single-point fuel-injection (optional) for the 1986 models. Additionally, some overseas markets received versions with the 1.5 L J15
, 1.6 L J16 or 1.8 L L18 carbureted engines. The 720 Series was never available with any of the Z22E or Z20E multi-port fuel injected engines. These engines are, however, easy to adapt and integrate into the chassis and can be found with the genuine appearance of being original equipment.
Datsun
Datsun was an automobile marque. The name was created in 1931 by the DAT Motorcar Co. for a new car model, spelling it as "Datson" to indicate its smaller size when compared to the existing, larger DAT car. Later, in 1933 after Nissan Motor Co., Ltd...
compact pickup truck was produced in Japan
Japan
Japan is an island nation in East Asia. Located in the Pacific Ocean, it lies to the east of the Sea of Japan, China, North Korea, South Korea and Russia, stretching from the Sea of Okhotsk in the north to the East China Sea and Taiwan in the south...
from 1955 and imported to the United States
United States
The United States of America is a federal constitutional republic comprising fifty states and a federal district...
, Australia
Australia
Australia , officially the Commonwealth of Australia, is a country in the Southern Hemisphere comprising the mainland of the Australian continent, the island of Tasmania, and numerous smaller islands in the Indian and Pacific Oceans. It is the world's sixth-largest country by total area...
, Finland
Finland
Finland , officially the Republic of Finland, is a Nordic country situated in the Fennoscandian region of Northern Europe. It is bordered by Sweden in the west, Norway in the north and Russia in the east, while Estonia lies to its south across the Gulf of Finland.Around 5.4 million people reside...
, the Middle East
Middle East
The Middle East is a region that encompasses Western Asia and Northern Africa. It is often used as a synonym for Near East, in opposition to Far East...
, South Africa, and various European countries. Modern versions of this vehicle are still in production around the world, currently known as the Frontier & Navara.
Datsun 120
The Datsun 120 was a load carrying bodystyle version of the Datsun 1000 sedan, and was introduced in January 1955 as the first Datsun truck with up-to-date styling. It used the 25 hp, 860cc Nissan D10Nissan D engine
There were more than one engine type named Nissan D-series-D10:The D10 was a 0.9 L engine is a flat-head sleeve valve automobile engine produced from 1952 through 1955. Bore was and stroke was in the undersquare British style...
engine with a 4-speed floor shift (column shift for the 123) manual transmission. During its 3 years in production three models were built: 120 (Jan. to Dec. 1955), 122 (Dec. 1955 to May 1956) and 123 (Jun. 1956 to Sep. 1957). For reasons unknown, Nissan skipped the 121 designation. The 120 series was based on the Datsun 110 series. Delivery van, panel van (120 only), and double cab versions were available.
Datsun 220
1957 November, the type 220 was introduced. It was produced from 1957 to 1961. During this time four models were produced: 220 (1957-1958), 221 (1959), 222 (1959), and 223 (1960-1961). The chassis was based on the 210 series. Two engines were available: the 37 hp Nissan C engineNissan C engine
The Nissan C-series was a straight-4 automobile engine produced in the 1950s. It displaced 1.0 L and produced 37 hp and 47.7 to 49 ft·lbf . It was a pushrod engine and used single- or dual-26 mm carburetors.Applications:* 1957-1960 Datsun 210/114* 1957 Datsun Truck* 1959...
, and the 48 hp Nissan E engine
Nissan E engine
The Nissan E series name was used on two types of automobile engines. The first was an OHV line used in the late 1950s and early 1960s. The second was an OHC version ranging from 1.3 L to 1.6 L and produced from 1982 through 1988.-First series:...
. The E engine was used in models sold on the export market. The 223 was powered by a new engine, the Nissan E-1
Nissan E engine
The Nissan E series name was used on two types of automobile engines. The first was an OHV line used in the late 1950s and early 1960s. The second was an OHC version ranging from 1.3 L to 1.6 L and produced from 1982 through 1988.-First series:...
, rated at 60 hp. The 220 was the first Datsun truck to be equipped with a 12 volt electrical system. Double cab and delivery van versions were available. Side badges were "Datsun 1000" or "Datsun 1200". The 223 also had a round "60 HP" badge. There was also a round badge on the dashboard that said "Datsun 1000" or "Datsun 1200", depending on the engine. The 223 had a revised chassis and suspension system. The front I-beam suspension used on the 220, 221 and 222 was replaced with an independent front suspension with torsion bars. A low cost option, the Datsun 124, was introduced in October 1957 followed by the Datsun 125 in 1959 and finally the Datsun 126 in 1960. The 124 was powered by the Nissan D10
Nissan D engine
There were more than one engine type named Nissan D-series-D10:The D10 was a 0.9 L engine is a flat-head sleeve valve automobile engine produced from 1952 through 1955. Bore was and stroke was in the undersquare British style...
, while the 125 and 126 were powered by an improved version of the D10, called the B-1 (rated at 27 hp).
1958, exhibited at the Los Angeles Auto Show. It was exported to America soon after. It was the 220 series that established Datsun in the American market.
Datsun 320
August 1961 the series 320 was released and was produced from 1961 to 1965 (320-322). The 320 series was largely inherited from the earlier 120-220, with improvements to body and frame. It used the Nissan E-1 engineNissan E engine
The Nissan E series name was used on two types of automobile engines. The first was an OHV line used in the late 1950s and early 1960s. The second was an OHC version ranging from 1.3 L to 1.6 L and produced from 1982 through 1988.-First series:...
. This engine produced 60 hp.
All Datsun trucks kept the A-arm torsion bar front suspension with leaf spring rear ends and had 1/2 ton load capacity. Rear end gearing was a low 4.875:1 along with a 4 speed transmission, as a result, the 320 was not freeway friendly above 60mph. Fender emblems showed "Datsun 1200" and "60 HP" with a "Datsun" emblem on the front nose of the hood.
Vehicle type, SINGLECAB "truck" (320), longer wheelbase
Wheelbase
In both road and rail vehicles, the wheelbase is the distance between the centers of the front and rear wheels.- Road :In automobiles, the wheelbase is the horizontal distance between the center of the front wheel and the center of the rear wheel...
SINGLECAB track (G320), DOUBLECAB "pickup" (U320), 2-door, "light-van" (V320). Though described as a van, it also resembles a 2-door SUV, an appearance approach that was internationally introduced in 1986 with the Nissan Pathfinder
Nissan Pathfinder
The Nissan Pathfinder is a SUV manufactured by Nissan Motors since 1986, derived from Nissan's compact pickup truck platform. The Pathfinder is slotted in size between the Murano and Armada or Patrol, but in price between the Xterra and Murano...
.
The 320 came in two cab and bed versions. The NL320 "Sport Pick-Up" (1963-65) variation was a rarer (1000 produced) UNI-BODY construction with the cab and bed one piece. Its back half was greatly different than the standard separated bed model 320 pick-up.
Bed and luggage space were in addition to the expansion, with the support of the market characteristics and the robust chassis engine was easy to handle, it was a best seller in the truck market segment.
The chassis was also a sales hit 310 in the reinforcement of the type Datsun Bluebird 310, a variation of the same series, in which the X-members plus a reinforcement of the Fairlady roadster
Roadster
A roadster is a two-seat open car with emphasis on sporty handling and without a fixed roof or side weather protection. Strictly speaking a roadster with wind-up windows is a convertible but as true roadsters are no longer made the distinction is now irrelevant...
of the S310-type CSP311. It was also used for the new Silvia
Nissan Silvia
The S12 was produced from 1984 to 1988, with revisions to the exterior trim in 1987 . It was sold in three configurations—a coupe , a hatchback, and a widebody chassis called grandprix .A number of different engines were equipped in the S12 chassis, depending on production year and more...
coupe.
In 1964, minor changes, and competitors from Toyota called the Hilux
Toyota Hilux
The Toyota Hilux is a series of compact pickup trucks produced and marketed by the Toyota Motor Corporation. Most countries used the Hilux name for the entire life of the series but in North America, the Hilux name was retired in 1976 in favor of Truck, Pickup Truck, or Compact Truck...
and Mazda called the Mazda B-Series
Mazda B-Series
The Mazda B-Series is a pickup truck, first manufactured in 1961 by Mazda Motor Corporation. From the first B-Series, Mazda has used the engine displacement to determine the name. Thus, the B1500 had a 1.5 L engine and the B2600 had a 2.6 L engine...
.
Datsun 520
The Datsun 520 was built from 1965 - 1968 (the 420 designation was skipped). It used the new 67 hp Nissan J13Nissan J engine
The Nissan J engine was a straight-4 gasoline internal combustion engine produced by Nissan in the 1960s through the 1980s.-J13:The J13 was used in the 1965 to 1967 Datsun 411 sedan and wagon. This OHV engine was also produced for the Nissan 520 and 521 trucks from 1967 to 1969 when replaced by the...
. In 1965 and 1966 the 520 had 2 headlights. In 1967, the 520 was slightly redesigned and had 4 headlights. This design was carried on until the end of 520 production. Single cab (520), LWB Single cab (G520), Double cab (U520) and delivery van (V520) versions were available. The fender emblems said "Datsun 1300". A grille emblem was added in 1966 and simply said "D".
The 521 was the minor changed version of 520, with Flat-deck style. It used the Nissan J engine
Nissan J engine
The Nissan J engine was a straight-4 gasoline internal combustion engine produced by Nissan in the 1960s through the 1980s.-J13:The J13 was used in the 1965 to 1967 Datsun 411 sedan and wagon. This OHV engine was also produced for the Nissan 520 and 521 trucks from 1967 to 1969 when replaced by the...
(the J15, rated at 77 hp) and later had an Nissan L16
Nissan L engine
The Nissan L series of automobile engines ranged from 1.3 L to 2.8 L in both straight-4 and straight-6 configurations and were produced from 1967 through 1986. This was the engine of the Datsun 240Z sports car as well as the Datsun 510 and the first Nissan Maxima. These engines are known for their...
engine, with a straight rear axle and somewhat resembled a Datsun 510
Datsun 510
The Datsun 510 was a series of the Datsun Bluebird sold from 1968 to 1974, and offered outside the U.S. and Canada as the Datsun 1600. According to AutoWeek's G.D...
from the front. The fender emblems said "Datsun 1500" or "Datsun 1600" (depending on engine). Van/delivery van (V521) and double cab (U521) versions were available. It was manufactured from 1969–1972, preceded by the 520 and followed by the 620. The 521 was the first compact half-ton pickup sold in the American market, in 1968.
Datsun 620
In February 1972, Datsun 620 truck was released and was in production until 1979. It was a regular cab truck (a King Cab version was released in 1977) and two types of wheelbases were offered, and it consisted of six models of pickup seating, it was related to the delivery van offered only in Japan. There was also the U620, which was a crew cab "Utility" version. It used a shorter bed to allow full seating for four people. The U620 was essentially a 620 pickup from the doors forward, with the bed and rear end being the only difference. The 620 continued to use the Nissan L engineNissan L engine
The Nissan L series of automobile engines ranged from 1.3 L to 2.8 L in both straight-4 and straight-6 configurations and were produced from 1967 through 1986. This was the engine of the Datsun 240Z sports car as well as the Datsun 510 and the first Nissan Maxima. These engines are known for their...
.
The 1972-1973 models were powered by the L16 engine
Nissan L engine
The Nissan L series of automobile engines ranged from 1.3 L to 2.8 L in both straight-4 and straight-6 configurations and were produced from 1967 through 1986. This was the engine of the Datsun 240Z sports car as well as the Datsun 510 and the first Nissan Maxima. These engines are known for their...
(96 hp), the 1974 model used the L18 engine
Nissan L engine
The Nissan L series of automobile engines ranged from 1.3 L to 2.8 L in both straight-4 and straight-6 configurations and were produced from 1967 through 1986. This was the engine of the Datsun 240Z sports car as well as the Datsun 510 and the first Nissan Maxima. These engines are known for their...
(100 hp), and the 1975-1979 models used the L20B engine
Nissan L engine
The Nissan L series of automobile engines ranged from 1.3 L to 2.8 L in both straight-4 and straight-6 configurations and were produced from 1967 through 1986. This was the engine of the Datsun 240Z sports car as well as the Datsun 510 and the first Nissan Maxima. These engines are known for their...
(110 hp). In overseas markets the 620 was equipped with the J15
Nissan J engine
The Nissan J engine was a straight-4 gasoline internal combustion engine produced by Nissan in the 1960s through the 1980s.-J13:The J13 was used in the 1965 to 1967 Datsun 411 sedan and wagon. This OHV engine was also produced for the Nissan 520 and 521 trucks from 1967 to 1969 when replaced by the...
. The standard transmissions were the F4W63 4-speed (1972-1973) and F4W71 4-speed (1974-1979). In 1977, the optional FS5W71B 5-speed transmission became available. The 3N71
Jatco 3N71 transmission
The Jatco 3N71 transmission was the first 3-speed automatic transmission from Nissan. It was an introduced as a conventional alternative to the then-ubiquitous and popular Borg-Warner Type 35. It was designed for use with rear wheel drive vehicles with longitudinal engines...
3-speed automatic became available as an option in mid-1972. This was the first series to offer an automatic transmission as an option (all model series before the 620 only had manual transmissions). Final drive gearing was 4.375:1. Side badges were "DATSUN 1600" or simply "DATSUN". The grille badge was two colored stripes (one red and one blue, respectively) behind the word "DATSUN". Nissan continued the strong rhythms and styling of its previous vehicles, with a shoulder "wing line" or "Bullet Side" accent running alongside the vehicle. The 620 was known for its durability and weather resistance despite its small size along with an engine known for reliability. As a result, the 620 was competing with the larger American pickup trucks, which in turn gave Datsun a strong reputation in Cape town
A number of innovations were introduced with the 620: first long-bed (1975), first extended-cab (1977), front disc brakes (1978), and electronic ignition (1978).
The 620 was redesigned slightly for 1978, with changes to grille and front bumper.
Datsun 720
The Datsun 720 came in regular cab and "King Cab" models, with regular and long bed options. The King Cab proved very popular. There was also a 4-door variant offered in some overseas markets. A covered utility body style like that of the early Toyota 4RunnerToyota 4Runner
The Toyota 4Runner is a mid-size SUV manufactured by Toyota and sold throughout the world from 1984 to the present. In Japan it was known as the Toyota Hilux Surf...
was also available as an aftermarket conversion by a company called Matrix3. This was available as a "dealer option" from 1984-1986 and was called the Bushmaster. In Mid-1986 a factory-built version was introduced and was named Pathfinder
Nissan Pathfinder
The Nissan Pathfinder is a SUV manufactured by Nissan Motors since 1986, derived from Nissan's compact pickup truck platform. The Pathfinder is slotted in size between the Murano and Armada or Patrol, but in price between the Xterra and Murano...
. Other US model variations besides KC (King Cab) were the GL (long bed), DX (deluxe), ST (sport truck aka "Li'l Hustler" shortbed) and Cab-and-Chassis models (2wd only).
The 720 was manufactured in the newly built Smyrna, Tennessee plant from 1983.5 to 1986.
Early (1980–1983) models had single wall beds with outside rolled lips and rope ties, 2 faux hood vents (some had real vents), and tail lights on the lower rear valance (similar to the 620).
For a limited period, 1983.5-1984 models built in the USA had the single wall beds with rope ties, yet used tail lights on the rear bed corners with amber turn signals over the red stop/tail lights while the backup lights remained under the tailgate. The front end underwent transformation as well, with a larger grill, bumper, and corner lights. There was also a revised dashboard with round instead of square gauges. At the same time, the regular cab was lengthened slightly and the air extractor vents behind the cab doors changed from the high "flag" look to long, narrow ones that matched the height of the window opening. The cab of King Cabs was unchanged.
Finally, the late model trucks produced from 1985 - 1986.5 (first half) utilized double wall, smooth sided beds, with revised tail lights on the corners which resembled those on Chevrolet/GMC S-series trucks. Some overseas models continued with the early style beds. Model years 1986.5 (second half) and later were called Nissan Hardbody Truck
Nissan Hardbody Truck
-Nissan Hardbody:The D21 generation was the successor to the Datsun "720". The company used the name "Datsun" from 1980 to 1983 then renamed itself "Nissan" beginning with the 1983.5 model year line of trucks and cars alike. The D21 series were unofficially called Nissan Hardbody in the United...
s, chassis code D21.
In most other parts of the world, one could purchase a 4-door cab version of the 720, but such trucks are rare and were never sold in the US.
The Datsun 720 was available in both 2WD and 4WD
Four Wheel Drive
The Four Wheel Drive Auto Company, more often known as Four Wheel Drive or just FWD, was founded in 1909 in Clintonville, Wisconsin, as the Badger Four-Wheel Drive Auto Company by Otto Zachow and William Besserdich.-History:...
configurations, the latter having a divorced transfer case. The 2WD King Cabs had a 2-piece driveshaft with the center support bearing.
In 1979.5 and 1980, models were powered by Datsun's 2.0L carbureted L20B engine, but soon after switched to the Nissan NAPS-Z engine
Nissan Z engine
The Nissan Z series of automobile engines ranged from 1.6 L to 2.4 L and were produced from 1979 through August 1989. The Z series engines retained a nearly identical block to the earlier L Series with the exception of the Z24 which utilized a taller deck height to increase engine...
line for 1981 (Z20S). In the Middle East it was powered by Datsun's 1.8 L carbureted L18 engine. The 1981-1982 models used the Z22 carbureted 2.2 L engine and an optional SD22 diesel of the same displacement. In mid-1983 Nissan introduced the Z24 2.4 liter twin spark four-cylinder motor, producing 103 hp, 2.3 L SD23 OHV diesel four, and the SD25 diesel; this happened at the same time that the 720 series was marketed as a Nissan (the Datsun name, which had disappeared entirely after 1984, was now only seen below the Nissan name on the left corner of the tailgate). In the American market the diesel engine was only available in the 2WD 720 (from 1982 to 1985). The Z24 was upgraded to Z24i single-point fuel-injection (optional) for the 1986 models. Additionally, some overseas markets received versions with the 1.5 L J15
Nissan J engine
The Nissan J engine was a straight-4 gasoline internal combustion engine produced by Nissan in the 1960s through the 1980s.-J13:The J13 was used in the 1965 to 1967 Datsun 411 sedan and wagon. This OHV engine was also produced for the Nissan 520 and 521 trucks from 1967 to 1969 when replaced by the...
, 1.6 L J16 or 1.8 L L18 carbureted engines. The 720 Series was never available with any of the Z22E or Z20E multi-port fuel injected engines. These engines are, however, easy to adapt and integrate into the chassis and can be found with the genuine appearance of being original equipment.
External links
- Nissan DATSUNTRUCK
- Nissan DATSUNPICKUP
- NISSAN HERITAGE COLLECTION
- http://www.pickuptruck.com/html/history/nissan_segment1.html
- http://trucks.about.com/cs/classicgallery/a/datsun_trucks.htm
- http://rohling.com/auto/pl521/
- http://www.datsunhistory.com/
- http://www.earlydatsun.com/index.html
- http://olddatsuns.com (Datsun 620)