Flushometer
Encyclopedia
the Royal Flushometer is a product of the Sloan Valve Company that uses an inline handle to flush urinals. It was invented by William Elvis Sloan
William Elvis Sloan
William Elvis Sloan I invented the Flushometer flushing mechanism, which is currently installed in millions of commercial, institutional and industrial restrooms worldwide.-Biography:...

.

Function

It uses water pressure from the water supply system rather than gravity from a raised tank like in previous models.

"A diaphragm separates a pressure chamber from the main water supply. A narrow passageway leads from the main water supply into the pressure chamber. It is the narrowness of this passage that meters the flow by slowing repressurizing of the pressure chamber after the action of a flush. The diaphragm technology allows the flush valve to open and let water into the bowl. A main cylinder valve operates up and down. A groove in this cylinder allows water from the main supply to flow through when it is in a mid position. The valve is shut off at both its top and bottom positions. A second valve, placed within the main cylinder valve, releases the water in the topmost pressure chamber when the flush lever is activated, sending the main cylinder valve shooting upwards. The topmost pressure chamber slowly refills through its narrow passageway, pushing the valve cylinder back down gradually. A flush occurs while it is in its open mid positions. Because the water is gradually shut off, slower water at the end of the cycle that will not activate the siphon serves to refill the bowl. The valve cannot be kept open by holding the flush lever in the activated position, wasting water, because this only sends the main cylinder valve all the way up to its topmost shutoff position. A flush can only occur when the valve is in one of its mid positions."
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK