Ford Taunus P3
Encyclopedia
The Ford Taunus 17 M was a middle sized family saloon/sedan produced by Ford of Germany
between 1960 and 1964. The Taunus 17M name had been applied to the car’s predecessor and it would apply also to subsequent Ford models which is why the 17M introduced in 1960 is usually identified, in retrospect, as the Ford Taunus P3. It was the third newly designed German Ford to be launched after the war and for this reason it was from inception known within the company as Ford Project 3 (P3) or the Ford Taunus P3.
Members of the press had apparently competed to find a suitably disrespectful epithet to described the controversially styled first Taunus 17M
, and it was in the same tradition that the new 17M for 1960 became known as the “Badewannetaunus” (Bath tub Taunus).
The Ford Taunus P3 was a commercial success. 669,731 were produced during a four year production run, giving an annualised rate more than twice that achieved by the predecessor model during its three years in production.
, a German born designer who would dominate car design at Ford of Germany for nearly thirty years and whose subsequent designs included the 1969 Ford Capri
and its successors. Towards the end of his time in charge of design with Ford of Germany, Bahnsen also led the teams that designed the Fords Sierra
and Scorpio
. In the context of 1960 the Taunus P3 can nevertheless be seen as Bahnsen’s most innovative design for a production car.
The 1960 Taunus design featured a recurring geometrical shape, which was a cross between a short sausage and a long lozenge. The rear panel and the side panels respected the same basic shape as did the front grill, subject to two large cut-outs for the headlights. At a time when it was an unquestioned article of faith that headlights were round, the Taunus featured headlights that were lozenge shaped. Ten years later this had inspired European automakers to come up with various non-round headlamp shapes, though many had by 1970 settled on a standardised shared rectangular shape. Non-round headlamps were also profoundly un-American: in the USA regulations followed the assumption that headlamps must be round.
The same shape was carried over to the interior of the car where the main dials and controls on the dash-board were surrounded by a thick frame in the shape that respected a short sausage (or a very long lozenge). The repetitious use of a single simple shape at different levels of the design gave the overall car a consistent visual unity which was in stark contrast to the high finned flamboyance of the previous Taunus 17M
and was seen at the time as a radical switch by Ford of Germany away from American styling in favour of European styling. There were no tails fins and there was very little decorative chrome included. The efficiency of its superficially much more simple design enabled Ford to boast that the 1960 car, despite being fractionally narrowed on the outside, offered usefully more interior width than the car it replaced.
Despite the importance of sausages in German cuisine, the award for a catchy soubriquet was earned by the person who saw the car and was reminded not of a sausage but of a bathtub. It was and remains the “Badewanne” (bathtub) soubriquet that caught the eye of the press reporters, and it is as the “Badewannetaunus” that the car continues to be remembered by enthusiasts
The P3 also followed the tradition of its predecessor in that coach built two-door cabriolets and coupes were offered, converted by a traditional Cologne based body builder called Karl Deutsch However, these special bodied cars appear to have been relatively expensive, and only about 150 were produced.
The cars were offered with an unusually broad choice of color and interior trim options.
The early 1960s were a period of rapid expansion for the west European auto-industry, and export markets for the new 17M included Greece and Australia where several cars were converted locally into “pickups
” or, in Australian English, “utes
”.
and, from 1961, a new larger 1757 cc engine. Power outputs initially ranged from 55 ps/hp to 60 ps/hp, and these engine versions remained available throughout the model’s four year life, but several more powerful engines featuring raised compression ratios in response to the increased availability of higher octane fuels appeared during the four year period: by 1964 the most powerful Ford 17M offered 75 ps/hp.
The engines were all gasoline/petrol powered four-cylinder inline four-stroke water-cooled units.
Changing gear involved a column-mounted gear change, which by now was becoming increasingly mainstream in Germany. It was possible to specify a “Saxomat” automatic clutch with the three-speed transmission,: drivers content to accept a fully manual gear change system could also specify a four-speed gear box.
There were several important technical innovations during the four year model run which no doubt go some way to explain the car’s commercial success when compared to that achieved by its predecessor, and will have strengthened the Ford image in a market which had grown used to seeing Ford sales trailing those of General Motors
’ Opel
business. In April 1962 the 17M became the first mainstream production car in Germany to offer, as an option, disc brakes on the front wheels. Just over a year later front disc brakes became a standard fitting on all models. 1962 was also the year when the car acquired an “automatic starter” which reportedly made the traditional manual choke
unnecessary.
Steel bodied station wagon equivalent models based on mainstream sedans were rapidly gaining in popularity. Giving the Taunus 17M station wagon a special name, “Turnier”, intended to be unique to the Ford brand also showed the Ford marketing department ahead of the German owned competition. The Opel Rekord station wagon had already been dubbed by Opel a “CarAVan” in 1958, but market leaders Volkswagen
would not find their equivalent label until the launch of the Volkswagen 1500 Variant
in 1962.
on the German market, becoming the second best selling auto-brand, beaten to the top spot only by Volkswagen
.
The Taunus P3 was replaced by the Ford Taunus P5 which would come with a wider range of engines and which would sell at approximately the same rate. However, the overall market size was growing through the 1960s, and with it grew the sales of the Opel Rekord
. After the Taunus P3 no future Taunus model would come close to challenging Opel’s dominance of the large lucrative middle-market portion of the German auto-market.
In 2006 484 Taunus P3 sedans/saloons were registered in Germany along with 21 “Turnier” station wagons. There were thought to be fewer than 10 in the USA, and a handful probably survive in other countries where statistics are less readily accessible than in Germany.
Ford Germany
-Ford Motor Co. AG:Until 27 January 1950 all Ford's European operations other than in the USSR were run from Dagenham and owned by Ford Motor Company Limited, Dearborn's 55% owned subsidiary...
between 1960 and 1964. The Taunus 17M name had been applied to the car’s predecessor and it would apply also to subsequent Ford models which is why the 17M introduced in 1960 is usually identified, in retrospect, as the Ford Taunus P3. It was the third newly designed German Ford to be launched after the war and for this reason it was from inception known within the company as Ford Project 3 (P3) or the Ford Taunus P3.
Members of the press had apparently competed to find a suitably disrespectful epithet to described the controversially styled first Taunus 17M
Ford Taunus P2
The Ford Taunus 17 M was a middle sized family saloon/sedan produced by Ford of Germany between 1957 and 1960. The Taunus 17M name was also applied to subsequent Ford models which is why the car is usually identified, in retrospect, as the Ford Taunus P2...
, and it was in the same tradition that the new 17M for 1960 became known as the “Badewannetaunus” (Bath tub Taunus).
The Ford Taunus P3 was a commercial success. 669,731 were produced during a four year production run, giving an annualised rate more than twice that achieved by the predecessor model during its three years in production.
European design
The first post-war Taunus models had been designed in North America. The Taunus P3 was designed by Uwe BahnsenUwe Bahnsen
Uwe Bahnsen is a German car designer. After an apprenticeship as a window dresser Bahnsen studied at the College of Fine Arts in Hamburg. From 1958 to 1986 he was with Ford Europe held various positions, most recently as vice president for design. During this time, he created such icons of today's...
, a German born designer who would dominate car design at Ford of Germany for nearly thirty years and whose subsequent designs included the 1969 Ford Capri
Ford Capri
Ford Capri was a name used by the Ford Motor Company for three different automobile models. The Ford Consul Capri coupé was produced by Ford of Britain between 1961 and 1964. The Ford Capri coupé was produced by Ford of Europe from 1969 to 1986...
and its successors. Towards the end of his time in charge of design with Ford of Germany, Bahnsen also led the teams that designed the Fords Sierra
Ford Sierra
The Ford Sierra is a large family car that was built by Ford Europe from 1982 until 1993. It was designed by Uwe Bahnsen, Robert Lutz and Patrick le Quément. The code used during development was "Project Toni"....
and Scorpio
Ford Scorpio
The Ford Scorpio is an automobile that was produced by the Ford Motor Company from 1985 through to 1998.It was the replacement for the European Ford Granada line...
. In the context of 1960 the Taunus P3 can nevertheless be seen as Bahnsen’s most innovative design for a production car.
The 1960 Taunus design featured a recurring geometrical shape, which was a cross between a short sausage and a long lozenge. The rear panel and the side panels respected the same basic shape as did the front grill, subject to two large cut-outs for the headlights. At a time when it was an unquestioned article of faith that headlights were round, the Taunus featured headlights that were lozenge shaped. Ten years later this had inspired European automakers to come up with various non-round headlamp shapes, though many had by 1970 settled on a standardised shared rectangular shape. Non-round headlamps were also profoundly un-American: in the USA regulations followed the assumption that headlamps must be round.
The same shape was carried over to the interior of the car where the main dials and controls on the dash-board were surrounded by a thick frame in the shape that respected a short sausage (or a very long lozenge). The repetitious use of a single simple shape at different levels of the design gave the overall car a consistent visual unity which was in stark contrast to the high finned flamboyance of the previous Taunus 17M
Ford Taunus P2
The Ford Taunus 17 M was a middle sized family saloon/sedan produced by Ford of Germany between 1957 and 1960. The Taunus 17M name was also applied to subsequent Ford models which is why the car is usually identified, in retrospect, as the Ford Taunus P2...
and was seen at the time as a radical switch by Ford of Germany away from American styling in favour of European styling. There were no tails fins and there was very little decorative chrome included. The efficiency of its superficially much more simple design enabled Ford to boast that the 1960 car, despite being fractionally narrowed on the outside, offered usefully more interior width than the car it replaced.
Despite the importance of sausages in German cuisine, the award for a catchy soubriquet was earned by the person who saw the car and was reminded not of a sausage but of a bathtub. It was and remains the “Badewanne” (bathtub) soubriquet that caught the eye of the press reporters, and it is as the “Badewannetaunus” that the car continues to be remembered by enthusiasts
Body
Most of the cars were sold as two- or four-door sedans/saloons. A three-door “Turnier” station wagon was also available. The confident determination of the car’s designers’ to celebrate the new decade with something new and different was reflected in the unusual positioning of the rear lights on the early station wagons, on the leading edge at the back of the roof of the car, as two red horizontal units lined up directly above the tailgate. Later P3 Turniers had their rear lights more conventionally positioned.The P3 also followed the tradition of its predecessor in that coach built two-door cabriolets and coupes were offered, converted by a traditional Cologne based body builder called Karl Deutsch However, these special bodied cars appear to have been relatively expensive, and only about 150 were produced.
The cars were offered with an unusually broad choice of color and interior trim options.
The early 1960s were a period of rapid expansion for the west European auto-industry, and export markets for the new 17M included Greece and Australia where several cars were converted locally into “pickups
Pickup truck
A pickup truck is a light motor vehicle with an open-top rear cargo area .-Definition:...
” or, in Australian English, “utes
Coupé utility
The coupé utility automobile body style, also known colloquially as the ute in Australia and New Zealand, combines a two-door "coupé" cabin with an integral cargo bed behind the cabin—using a light-duty passenger vehicle-derived platform....
”.
Engine and running gear
The cars were all branded as Ford Taunus 17Ms which might have led observers who thought they had understood Ford Germany’s naming conventions to conclude that the cars all came with 1.7 litre engines. In fact, there were three different engine sizes offered, being the 1498 cc unit first seen in the Taunus 15M of 1954, the 1698 cc unit originally introduced in 1957 to cope with the weight of the first Ford Taunus 17MFord Taunus P2
The Ford Taunus 17 M was a middle sized family saloon/sedan produced by Ford of Germany between 1957 and 1960. The Taunus 17M name was also applied to subsequent Ford models which is why the car is usually identified, in retrospect, as the Ford Taunus P2...
and, from 1961, a new larger 1757 cc engine. Power outputs initially ranged from 55 ps/hp to 60 ps/hp, and these engine versions remained available throughout the model’s four year life, but several more powerful engines featuring raised compression ratios in response to the increased availability of higher octane fuels appeared during the four year period: by 1964 the most powerful Ford 17M offered 75 ps/hp.
The engines were all gasoline/petrol powered four-cylinder inline four-stroke water-cooled units.
Changing gear involved a column-mounted gear change, which by now was becoming increasingly mainstream in Germany. It was possible to specify a “Saxomat” automatic clutch with the three-speed transmission,: drivers content to accept a fully manual gear change system could also specify a four-speed gear box.
There were several important technical innovations during the four year model run which no doubt go some way to explain the car’s commercial success when compared to that achieved by its predecessor, and will have strengthened the Ford image in a market which had grown used to seeing Ford sales trailing those of General Motors
General Motors
General Motors Company , commonly known as GM, formerly incorporated as General Motors Corporation, is an American multinational automotive corporation headquartered in Detroit, Michigan and the world's second-largest automaker in 2010...
’ Opel
Opel
Adam Opel AG, generally shortened to Opel, is a German automobile company founded by Adam Opel in 1862. Opel has been building automobiles since 1899, and became an Aktiengesellschaft in 1929...
business. In April 1962 the 17M became the first mainstream production car in Germany to offer, as an option, disc brakes on the front wheels. Just over a year later front disc brakes became a standard fitting on all models. 1962 was also the year when the car acquired an “automatic starter” which reportedly made the traditional manual choke
Choke valve
A Choke valve is a type of valve designed to create choked flow in a fluid. Over a wide range of valve settings the flow through the valve can be understood by ignoring the viscosity of the fluid passing through the valve; the rate of flow is determined only by the ambient pressure on the upstream...
unnecessary.
Advertising
The 1960s was a period of rapid expansion in Europe both for the auto-industry and in the world of advertising. Ford tended to be ahead of the field in this aspect of marketing, even if some of the resulting slogans appear stilted fifty years later. The style of new Taunus 17M was advertised as representing a „Linie der Vernunft“ which loosely translates as a “rational form” offering an implicit rebuke to the by now unfashionably elaborate styling of the old Taunus 17M. The car was advertised with the balanced and pithy slogan “Zum Fahren geboren. Zum sparen gebaut“ (Born to drive. Built to save/economise).Steel bodied station wagon equivalent models based on mainstream sedans were rapidly gaining in popularity. Giving the Taunus 17M station wagon a special name, “Turnier”, intended to be unique to the Ford brand also showed the Ford marketing department ahead of the German owned competition. The Opel Rekord station wagon had already been dubbed by Opel a “CarAVan” in 1958, but market leaders Volkswagen
Volkswagen
Volkswagen is a German automobile manufacturer and is the original and biggest-selling marque of the Volkswagen Group, which now also owns the Audi, Bentley, Bugatti, Lamborghini, SEAT, and Škoda marques and the truck manufacturer Scania.Volkswagen means "people's car" in German, where it is...
would not find their equivalent label until the launch of the Volkswagen 1500 Variant
Volkswagen Type 3
The Volkswagen Type 3 was a range of small cars from German manufacturer Volkswagen , introduced at the 1961 Frankfurt Motor Show, Internationale Automobil-Ausstellung ....
in 1962.
Commercial
The boldly styled and regularly upgraded Taunus P3 was a commercial success. 669,731 were produced. The figure includes 86,010 station wagons. In the sales statistics for several months of 1961/62 the success of the model even enabled Ford briefly to overtake OpelOpel
Adam Opel AG, generally shortened to Opel, is a German automobile company founded by Adam Opel in 1862. Opel has been building automobiles since 1899, and became an Aktiengesellschaft in 1929...
on the German market, becoming the second best selling auto-brand, beaten to the top spot only by Volkswagen
Volkswagen
Volkswagen is a German automobile manufacturer and is the original and biggest-selling marque of the Volkswagen Group, which now also owns the Audi, Bentley, Bugatti, Lamborghini, SEAT, and Škoda marques and the truck manufacturer Scania.Volkswagen means "people's car" in German, where it is...
.
The Taunus P3 was replaced by the Ford Taunus P5 which would come with a wider range of engines and which would sell at approximately the same rate. However, the overall market size was growing through the 1960s, and with it grew the sales of the Opel Rekord
Opel Rekord
The Opel Rekord was a large family car/executive car which was built in several generations by the German car manufacturer Opel.-Naming:The Rekord name evolved into the main name of the model; at first the name was used in close relationship with the Opel Olympia name, which pre-dated the Rekord...
. After the Taunus P3 no future Taunus model would come close to challenging Opel’s dominance of the large lucrative middle-market portion of the German auto-market.
Fifty years on
The Taunus P3 continues to generate enthusiasm, and most of the surviving vehicles in Germany enjoy the financial privileges and responsibilities available, in Germany, to owners of cars designated and maintained as oldtimers.In 2006 484 Taunus P3 sedans/saloons were registered in Germany along with 21 “Turnier” station wagons. There were thought to be fewer than 10 in the USA, and a handful probably survive in other countries where statistics are less readily accessible than in Germany.