Game clock
Encyclopedia
A game clock consists of two adjacent clock
s and buttons to stop one clock while starting the other, such that the two component clocks never run simultaneously. Game clocks are used in two-player game
s where the players move in turn. The purpose is to keep track of the total time each player takes for his or her own moves, and ensure that neither player overly delays the game.
Game clocks were first used extensively in tournament chess
, and are often called chess clocks. In a tournament, the arbiter typically places all clocks in the same orientation, so he can easily assess games that need attention at later stages. Their use has since spread to tournament Scrabble
, Shogi
, Go
, and nearly every competitive two-player board game
, as well as other types of games. The first time that game clocks were used in a chess tournament was in the London 1883 tournament
.
The simplest time control
is "sudden death", in which players must make a predetermined number of moves in a certain amount of time or forfeit immediately.
A particularly popular variant in informal play is blitz chess
, in which each player is given five minutes on the clock for the entire game.
The players may take more or less time over any individual move. The opening moves in chess are often played quickly due to their familiarity, which leaves the players more time to consider more complex and unfamiliar positions later. It is not rare in slow chess games for a player to leave the table, but the clock of the absent player continues to run if it is his turn, or starts to run if his opponent makes a move.
. Therefore more versatile digital
clocks are becoming increasingly popular. Even so, some people consider analog clocks to be nicer than the digital clocks, and a malfunctioning analog clock is a less serious event than a malfunctioning digital clock.
Electrical Engineering student and chess player, created the first digital chess clock as a project for an undergraduate EE course. Typical of most inventions, it was crude compared to the products on the market 30 years later and was limited by the technology that existed at the time. For example, the display was done with red LED
s. LEDs require significant power, and as a result, the clock had to be plugged in to a wall outlet. The high cost of LEDs at the time meant that only one set of digits could be displayed, that of the player whose turn it was to move. This meant that each player's time had to be multiplexed to the display when their time was running. In 1973, LSI chips were not readily or cheaply available, so all the multiplexing and logic were done using chips that consisted of four two-input TTL NAND gate
s, which resulted in excessive power consumption. Being plugged into the wall is obviously a major drawback, but had one advantage: the timebase for the clock was driven off of a rectified version of 60 cycle AC current. Each player had a separate counter, and, in a parallel to the original mechanical architecture, one player's counter was disabled while the other's was running. The clock only had one mode: time ran forward. It could be reset, but not set. It did not count the number of moves. But it successfully addressed the original goals of the project (accurate and matched timing).
is commonly used in modern chess in many different methodologies. One particularly notable development, which has gained quite wide acceptance in chess, was proposed by former world champion Bobby Fischer
, who in 1988 filed for (awarded in 1989) for a new type of digital chess clock. Fischer's digital clock gave each player a fixed period of time at the start of the game and then added a small amount after each move. In this way, the players would never be desperately short of time, but games could also be completed more quickly, doing away with the need for adjournments (in which a game is left incomplete to be finished at a later date). Although it was slow to catch on, as of 2004 a very large number of top class tournaments use Fischer's system, though usually in combination with the more traditional clocks (at lower levels, more traditional clocks are still employed as they are cheaper). Other aspects of Fischer's patent, such as a synthesized voice announcing how much time the players have, thus eliminating the need for them to keep looking at the clock, have not been adopted.
), (2) Bronstein (invented by David Bronstein
), (3) Simple Delay, (4) Game Word and (5) Hour Glass. The first three time controls implement some sort of delay clock, a small amount of time that is added for each move. The reason is that with a sudden-death time limit, all moves must be completed in the specified time, or the player loses. With a small delay added at each move, the player always has at least that much time to make a move. The two types of delay clocks differ in how the delay is implemented. The last two time controls are somewhat different, as they do not rely on time delay, as explained below.
Clock
A clock is an instrument used to indicate, keep, and co-ordinate time. The word clock is derived ultimately from the Celtic words clagan and clocca meaning "bell". A silent instrument missing such a mechanism has traditionally been known as a timepiece...
s and buttons to stop one clock while starting the other, such that the two component clocks never run simultaneously. Game clocks are used in two-player game
Game
A game is structured playing, usually undertaken for enjoyment and sometimes used as an educational tool. Games are distinct from work, which is usually carried out for remuneration, and from art, which is more often an expression of aesthetic or ideological elements...
s where the players move in turn. The purpose is to keep track of the total time each player takes for his or her own moves, and ensure that neither player overly delays the game.
Game clocks were first used extensively in tournament chess
Chess
Chess is a two-player board game played on a chessboard, a square-checkered board with 64 squares arranged in an eight-by-eight grid. It is one of the world's most popular games, played by millions of people worldwide at home, in clubs, online, by correspondence, and in tournaments.Each player...
, and are often called chess clocks. In a tournament, the arbiter typically places all clocks in the same orientation, so he can easily assess games that need attention at later stages. Their use has since spread to tournament Scrabble
Scrabble
Scrabble is a word game in which two to four players score points by forming words from individual lettered tiles on a game board marked with a 15-by-15 grid. The words are formed across and down in crossword fashion and must appear in a standard dictionary. Official reference works provide a list...
, Shogi
Shogi
, also known as Japanese chess, is a two-player board game in the same family as Western chess, chaturanga, and Chinese Xiangqi, and is the most popular of a family of chess variants native to Japan...
, Go
Go (board game)
Go , is an ancient board game for two players that originated in China more than 2,000 years ago...
, and nearly every competitive two-player board game
Board game
A board game is a game which involves counters or pieces being moved on a pre-marked surface or "board", according to a set of rules. Games may be based on pure strategy, chance or a mixture of the two, and usually have a goal which a player aims to achieve...
, as well as other types of games. The first time that game clocks were used in a chess tournament was in the London 1883 tournament
London 1883 chess tournament
The London 1883 chess tournament was a strong chess tournament among most of the leading players of the day. It was won convincingly by Johannes Zukertort ahead of Wilhelm Steinitz . Remarkably, Zukertort was already assured of victory with three rounds to go, having scored an astonishing 22/23...
.
The simplest time control
Time control
A time control is a mechanism in the tournament play of almost all two-player board games so that each round of the match can finish in a timely way and the tournament can proceed. Time controls are typically enforced by means of a game clock...
is "sudden death", in which players must make a predetermined number of moves in a certain amount of time or forfeit immediately.
A particularly popular variant in informal play is blitz chess
Blitz chess
Fast chess, also known as blitz chess, lightning chess, sudden death, speed chess, bullet chess and rapid chess, is a type of chess game in which each side is given less time to make their moves than under the normal tournament time controls of 60 to 180 minutes per player.-Overview:The different...
, in which each player is given five minutes on the clock for the entire game.
The players may take more or less time over any individual move. The opening moves in chess are often played quickly due to their familiarity, which leaves the players more time to consider more complex and unfamiliar positions later. It is not rare in slow chess games for a player to leave the table, but the clock of the absent player continues to run if it is his turn, or starts to run if his opponent makes a move.
Analog game clocks
Analog clocks (as pictured to the right) are equipped with a "flag" (a Dutch invention) that falls to indicate the exact moment the player's time has expired. Analog clocks use mechanical buttons. Pressing the button on your side physically stops the movement of your clock and releases the hold on your opponent's. The drawbacks of the mechanical clocks include accuracy and matching of the two clocks, and matching of the indicators (flags) of time expiration. Unfortunately, additional time can't easily be added for more complex time controls, especially those that call for an increment or delay on every move, such as some forms of byoyomiByoyomi
is an extended time control in two-player games, specifically Shogi and Go. The word is borrowed from Japanese; the term literally means "counting the seconds," or more generally, "countdown."...
. Therefore more versatile digital
Digital
A digital system is a data technology that uses discrete values. By contrast, non-digital systems use a continuous range of values to represent information...
clocks are becoming increasingly popular. Even so, some people consider analog clocks to be nicer than the digital clocks, and a malfunctioning analog clock is a less serious event than a malfunctioning digital clock.
Early development of digital game clocks
In 1973, to address the issues with analog clocks, Bruce Cheney, a Cornell UniversityCornell University
Cornell University is an Ivy League university located in Ithaca, New York, United States. It is a private land-grant university, receiving annual funding from the State of New York for certain educational missions...
Electrical Engineering student and chess player, created the first digital chess clock as a project for an undergraduate EE course. Typical of most inventions, it was crude compared to the products on the market 30 years later and was limited by the technology that existed at the time. For example, the display was done with red LED
LEd
LEd is a TeX/LaTeX editing software working under Microsoft Windows. It is a freeware product....
s. LEDs require significant power, and as a result, the clock had to be plugged in to a wall outlet. The high cost of LEDs at the time meant that only one set of digits could be displayed, that of the player whose turn it was to move. This meant that each player's time had to be multiplexed to the display when their time was running. In 1973, LSI chips were not readily or cheaply available, so all the multiplexing and logic were done using chips that consisted of four two-input TTL NAND gate
NAND gate
The Negated AND, NO AND or NAND gate is the opposite of the digital AND gate, and behaves in a manner that corresponds to the opposite of AND gate, as shown in the truth table on the right. A LOW output results only if both the inputs to the gate are HIGH...
s, which resulted in excessive power consumption. Being plugged into the wall is obviously a major drawback, but had one advantage: the timebase for the clock was driven off of a rectified version of 60 cycle AC current. Each player had a separate counter, and, in a parallel to the original mechanical architecture, one player's counter was disabled while the other's was running. The clock only had one mode: time ran forward. It could be reset, but not set. It did not count the number of moves. But it successfully addressed the original goals of the project (accurate and matched timing).
Recent developments of digital clocks and current usage
Digital clocks and Internet gaming have spurred a wave of experimentation with more varied and complex time controls than the traditional standards. Time controlTime control
A time control is a mechanism in the tournament play of almost all two-player board games so that each round of the match can finish in a timely way and the tournament can proceed. Time controls are typically enforced by means of a game clock...
is commonly used in modern chess in many different methodologies. One particularly notable development, which has gained quite wide acceptance in chess, was proposed by former world champion Bobby Fischer
Bobby Fischer
Robert James "Bobby" Fischer was an American chess Grandmaster and the 11th World Chess Champion. He is widely considered one of the greatest chess players of all time. Fischer was also a best-selling chess author...
, who in 1988 filed for (awarded in 1989) for a new type of digital chess clock. Fischer's digital clock gave each player a fixed period of time at the start of the game and then added a small amount after each move. In this way, the players would never be desperately short of time, but games could also be completed more quickly, doing away with the need for adjournments (in which a game is left incomplete to be finished at a later date). Although it was slow to catch on, as of 2004 a very large number of top class tournaments use Fischer's system, though usually in combination with the more traditional clocks (at lower levels, more traditional clocks are still employed as they are cheaper). Other aspects of Fischer's patent, such as a synthesized voice announcing how much time the players have, thus eliminating the need for them to keep looking at the clock, have not been adopted.
Time controls
There are five main types of Time Controls: (1) Fischer (invented by Bobby FischerBobby Fischer
Robert James "Bobby" Fischer was an American chess Grandmaster and the 11th World Chess Champion. He is widely considered one of the greatest chess players of all time. Fischer was also a best-selling chess author...
), (2) Bronstein (invented by David Bronstein
David Bronstein
David Ionovich Bronstein was a Soviet chess grandmaster, who narrowly missed becoming World Chess Champion in 1951. Bronstein was described by his peers as a creative genius and master of tactics...
), (3) Simple Delay, (4) Game Word and (5) Hour Glass. The first three time controls implement some sort of delay clock, a small amount of time that is added for each move. The reason is that with a sudden-death time limit, all moves must be completed in the specified time, or the player loses. With a small delay added at each move, the player always has at least that much time to make a move. The two types of delay clocks differ in how the delay is implemented. The last two time controls are somewhat different, as they do not rely on time delay, as explained below.
- Fischer—before a player has made his move, a specified time increment is added to his clock. Time can be accumulated, so if the player moves within the delay period, his remaining time actually increases. For example, if the delay time is five seconds, and a player has four seconds left on his clock, as soon as his opponent moves, he receives the increment and has nine seconds to make a move. If he takes two seconds to move, on the start of his next move he has twelve seconds. There is also a variant of this time control that adds the delay after a player makes his move (Fischer after), so the delay is added to the player's remaining time and is available for his next move. If however time runs out during his move, the game ends without the delay time being added. This variant prevents the player who is in time-trouble to take advantage of the extra-time.
- Bronstein delay—with the Bronstein timing method, the increment is always added after the move. But unlike Fischer, not always the maximum increment is added. If a player expends more than the specified increment, then the entire increment is added to the player's clock. But if a player has moved faster than the time increment, only the exact amount of time expended by the player is added. For example, if the delay is five seconds, the player has ten seconds left in his clock before his turn and during his turn he spends three seconds, after he presses the clock button to indicate the end of his turn, his clock increases by only three seconds (not five).
- Simple delay—when it becomes a player's turn to move, the clock waits for the delay period before starting to subtract from the player's remaining time. For example, if the delay is five seconds, the clock waits for five seconds before counting down. The time is not accumulated. If the player moves within the delay period, no time is subtracted from his remaining time. This time control is similar to a Bronstein with time added before the move.
- Word—it is a sudden death time control, without any increment nor delay. The difference here is that when the time expires by dropping to zero, a flag is set, and the clock immediately starts counting up without limit. This time control applies to games where the amount of time used after the allowed time can be subtracted from the player's score as a penalty, such as Tournament or Club ScrabbleScrabbleScrabble is a word game in which two to four players score points by forming words from individual lettered tiles on a game board marked with a 15-by-15 grid. The words are formed across and down in crossword fashion and must appear in a standard dictionary. Official reference works provide a list...
.
- Hour Glass—a player loses in this time control when he allows the difference between both clocks to reach the specified total amount. For example, if the total is defined as one minute, both players start their clocks at thirty seconds. Every second the first player uses to think in his moves is subtracted from his clock and added to his opponent's clock. If he uses thirty seconds to move, the difference between the clocks reaches one minute, and the time flag falls to indicate that he loses by time. If he has used twenty nine seconds and then pushes the clock's button, he has one second left on his clock and his opponent has fifty-nine seconds.