The Honda CT-90 was a small step through motorcycle

Motorcycle

A motorcycle is a single-track, two-wheeled motor vehicle. Motorcycles vary considerably depending on the task for which they are designed, such as long distance travel, navigating congested urban traffic, cruising, sport and racing, or off-road conditions.Motorcycles are one of the most...

 manufactured by Honda

Honda

is a Japanese public multinational corporation primarily known as a manufacturer of automobiles and motorcycles.Honda has been the world's largest motorcycle manufacturer since 1959, as well as the world's largest manufacturer of internal combustion engines measured by volume, producing more than...

 from 1966 to 1979. It was offered in two models - "Trail" or "X" with the main variations being gear ratios and tyre style. Perhaps one of Honda's hidden success stories, this bike sold well worldwide and has a faithful following to this day and has become collectable.

Basic Information

The CT90 in its classic form was an 89cc 4-stroke air-cooled single with a four-speed transmission and an automatic clutch, coupled with a 1.867:1 ratio reduction box switched into operation using a small lever under the transmission case. The cylinder was nearly horizontal in the step-through tube/stamping frame. The fork was originally a leading link suspension, replaced in 1969 with conventional telescoping-tube suspension.

The CT90 ended production in 1979, replaced the following year by the Honda CT110

Honda CT110

The Honda CT110 is a small motorcycle manufactured by Honda from 1980 to the present day and sold in various parts of the world. Perhaps one of Honda's hidden success stories, this bike has sold well worldwide and has a faithful following to this day...

, which was essentially the same machine bored out to 105cc and weighing slightly more. The 1980 CT110 lacked the reduction box; however, it returned in following years.

Market

Honda targeted hunters, fishermen, commuters and outdoorsmen with the Trail 90. Early ads often featured these bikes in wilderness settings, and they were very well suited for narrow trails, being small, lightweight (around 188 pounds) and with a forgiving suspension. It was ideal for climbing and carrying packs. The four-stroke engine was quiet and almost all models were equipped with spark-arrestor exhausts.

While targeted at off-road uses, this was not a "dirt bike" in the conventional sense. What's more, they could and often were registered for road use and had a top speed in hi-ratio road gear of around 55 mph (24.6 m/s). Fuel economy was excellent, often around and above 100mpg. In local commuter traffic, they were extremely maneuverable, though they were poorly-suited for highway travel due to limited power, off-road-biased tires, and top speed.

Predecessors

The CT90 "Trail 90" was preceded by the CT200 "Trail 90" which featured a dual-sprocket in the rear, wherein to shift to the low range the operator clipped an extra length of chain into the drive and ran it over a double-size rear-sprocket. The CT200 had an overhead valve engine, not overhead cam. There were also earlier trail models of smaller displacement, including the Trail 55.

Early overhead cam CT90 models also featured the dual sprocket setup rather than the sub-transmission of all later models.

See also

• Honda CT110
  Honda CT110
  The Honda CT110 is a small motorcycle manufactured by Honda from 1980 to the present day and sold in various parts of the world. Perhaps one of Honda's hidden success stories, this bike has sold well worldwide and has a faithful following to this day...
  
   which replaced the CT90 in 1980.
• Honda CT series bikes: Trail Cub / Hunter Cub