ISO 1
Encyclopedia
ISO 1 is an international standard
that specifies the standard reference temperature for geometrical product specification and verification. The temperature is fixed at 20 degrees centigrade, which is equal to 293.15 Kelvin
s and 68 degrees Fahrenheit.
Due to thermal expansion
, precision length
measurements need to be made at (or converted to) a defined temperature. ISO 1 helps in comparing measurements by defining such a reference temperature. The reference temperature of 20 °C was adopted by the CIPM on 15 April 1931, and became ISO recommendation number 1 in 1951. It soon replaced worldwide other reference temperatures for length measurements that manufacturers of precision equipment had used before, including 0 °C, 62 °F, and 25 °C. Among the reasons for choosing 20 °C was that this was a comfortable and practical workshop temperature and that it resulted in an integer value on both the Celsius and Fahrenheit scales.
International standard
International standards are standards developed by international standards organizations. International standards are available for consideration and use, worldwide...
that specifies the standard reference temperature for geometrical product specification and verification. The temperature is fixed at 20 degrees centigrade, which is equal to 293.15 Kelvin
Kelvin
The kelvin is a unit of measurement for temperature. It is one of the seven base units in the International System of Units and is assigned the unit symbol K. The Kelvin scale is an absolute, thermodynamic temperature scale using as its null point absolute zero, the temperature at which all...
s and 68 degrees Fahrenheit.
Due to thermal expansion
Thermal expansion
Thermal expansion is the tendency of matter to change in volume in response to a change in temperature.When a substance is heated, its particles begin moving more and thus usually maintain a greater average separation. Materials which contract with increasing temperature are rare; this effect is...
, precision length
Length
In geometric measurements, length most commonly refers to the longest dimension of an object.In certain contexts, the term "length" is reserved for a certain dimension of an object along which the length is measured. For example it is possible to cut a length of a wire which is shorter than wire...
measurements need to be made at (or converted to) a defined temperature. ISO 1 helps in comparing measurements by defining such a reference temperature. The reference temperature of 20 °C was adopted by the CIPM on 15 April 1931, and became ISO recommendation number 1 in 1951. It soon replaced worldwide other reference temperatures for length measurements that manufacturers of precision equipment had used before, including 0 °C, 62 °F, and 25 °C. Among the reasons for choosing 20 °C was that this was a comfortable and practical workshop temperature and that it resulted in an integer value on both the Celsius and Fahrenheit scales.