King (automobile)
Encyclopedia
The King was an automobile built in Detroit from 1911 to 1923, and in Buffalo in late 1923, with an additional car built in Detroit in 1896.
Charles Brady King
built his first car in Detroit in 1896. The original plan was to enter it in the November 1895 Chicago Times Herald auto race, but it was completed too late for that. King did finish it on March 6, 1896, and it became the first gasoline automobile to be successfully driven on the streets of Detroit. Henry Ford
reportedly followed behind on a bicycle the maiden voyage of the King. The situation in 1896 Detroit was not nearly as pro-automobile as it would be a decade later. Discouraged, King dismantled his car and sold the chassis to Byron Carter of future Cartercar
fame. King worked for various other car companies before creating 4-cylinder another car in 1910 and establishing the King Motor Car Company in February of the following year. The new King car incorporated a number of advanced features, such as an engine cast en bloc, cantilever springs, left-hand drive, and a centrally-located gearshift. Possibly its most advanced feature was its lubrication system in which the flywheel
served as a form of oil pump
. The first factory was rented and located at 1559 West Jefferson, but soon outgrew that and moved into the former Hupmobile plant at Jefferson and Concord in early 1912. Just a few months later, the firm was in receivership
, possibly from over-expansion. The company was now bought by chewing gum magnate Artemus Ward from New York City. He put J. G. Bayerline in the president position. Two years later there was a disagreement between the two men and Ward replaced Bayerline in the presidency of the company.
In December 1914, a V8 was introduced in the King, a scant two months after Cadillac announced its own V8-powered car. Starting in 1916, all Kings were 8-cylinder models. Production declined from a peak of 3000 in 1916 to a company low of 240 in 1923. During the more healthy years, the company exported cars to Europe, Australia, South America, South Africa, and Russia. Early 4-cylinder cars sold for $1350 in basic form, and for $1565 when fully equipped with windshield, hood, and gas lamps. By 1914, even the V8-powered car was only $1350, and was advertised as the "World's First Popular-Priced V8". By 1923, prices were $1795–$2550.
In the fall of 1920, Artemus Ward and other company directors petitioned to have the company dissolved, citing not enough working capital and a failure to secure loans from banks. The auto press said it was due to inefficient management. Early the next year, Charles A. Finnegan of Buffalo bought the company for $500,000 and assumed company debts of approximately double that. The debt was paid off by late 1922 and the receivership was terminated. In October 1923, the firm moved to a much smaller Buffalo factory, but was bankrupt and finished by early 1924. While in bankruptcy hearings, remaining bodies and parts were shipped to England. There, 100 additional Kings were assembled in 1925.
Charles Brady King
Charles Brady King
]]Charles Brady King was an American engineer & entrepreneur remembered as an automotive pioneer, artist, etcher, musician, poet, architect, mystic, industrialist and inventor....
built his first car in Detroit in 1896. The original plan was to enter it in the November 1895 Chicago Times Herald auto race, but it was completed too late for that. King did finish it on March 6, 1896, and it became the first gasoline automobile to be successfully driven on the streets of Detroit. Henry Ford
Henry Ford
Henry Ford was an American industrialist, the founder of the Ford Motor Company, and sponsor of the development of the assembly line technique of mass production. His introduction of the Model T automobile revolutionized transportation and American industry...
reportedly followed behind on a bicycle the maiden voyage of the King. The situation in 1896 Detroit was not nearly as pro-automobile as it would be a decade later. Discouraged, King dismantled his car and sold the chassis to Byron Carter of future Cartercar
Cartercar
The Cartercar was an American automobile manufactured in 1905 in Jackson, Michigan, in 1906 in Detroit, and from 1907 to 1915 in Pontiac, Michigan.-History:...
fame. King worked for various other car companies before creating 4-cylinder another car in 1910 and establishing the King Motor Car Company in February of the following year. The new King car incorporated a number of advanced features, such as an engine cast en bloc, cantilever springs, left-hand drive, and a centrally-located gearshift. Possibly its most advanced feature was its lubrication system in which the flywheel
Flywheel
A flywheel is a rotating mechanical device that is used to store rotational energy. Flywheels have a significant moment of inertia, and thus resist changes in rotational speed. The amount of energy stored in a flywheel is proportional to the square of its rotational speed...
served as a form of oil pump
Oil pump (internal combustion engine)
The oil pump in an internal combustion engine circulates engine oil under pressure to the rotating bearings, the sliding pistons and the camshaft of the engine...
. The first factory was rented and located at 1559 West Jefferson, but soon outgrew that and moved into the former Hupmobile plant at Jefferson and Concord in early 1912. Just a few months later, the firm was in receivership
Receivership
In law, receivership is the situation in which an institution or enterprise is being held by a receiver, a person "placed in the custodial responsibility for the property of others, including tangible and intangible assets and rights." The receivership remedy is an equitable remedy that emerged in...
, possibly from over-expansion. The company was now bought by chewing gum magnate Artemus Ward from New York City. He put J. G. Bayerline in the president position. Two years later there was a disagreement between the two men and Ward replaced Bayerline in the presidency of the company.
In December 1914, a V8 was introduced in the King, a scant two months after Cadillac announced its own V8-powered car. Starting in 1916, all Kings were 8-cylinder models. Production declined from a peak of 3000 in 1916 to a company low of 240 in 1923. During the more healthy years, the company exported cars to Europe, Australia, South America, South Africa, and Russia. Early 4-cylinder cars sold for $1350 in basic form, and for $1565 when fully equipped with windshield, hood, and gas lamps. By 1914, even the V8-powered car was only $1350, and was advertised as the "World's First Popular-Priced V8". By 1923, prices were $1795–$2550.
In the fall of 1920, Artemus Ward and other company directors petitioned to have the company dissolved, citing not enough working capital and a failure to secure loans from banks. The auto press said it was due to inefficient management. Early the next year, Charles A. Finnegan of Buffalo bought the company for $500,000 and assumed company debts of approximately double that. The debt was paid off by late 1922 and the receivership was terminated. In October 1923, the firm moved to a much smaller Buffalo factory, but was bankrupt and finished by early 1924. While in bankruptcy hearings, remaining bodies and parts were shipped to England. There, 100 additional Kings were assembled in 1925.