Legal definition of motorcycle
Encyclopedia
The legal definition of a motorcycle for the purposes of registration, taxation and rider licensing in most countries is a powered two-wheel motor vehicle. Most countries distinguish between mopeds up to 49 cc (scooters do not count as a separate category) and the more powerful, larger, vehicles known as motorcycle
Motorcycle
A motorcycle is a single-track, two-wheeled motor vehicle. Motorcycles vary considerably depending on the task for which they are designed, such as long distance travel, navigating congested urban traffic, cruising, sport and racing, or off-road conditions.Motorcycles are one of the most...

s. Many jurisdictions include some forms of three-wheelers as motorcycles.

Australia and New Zealand

In New Zealand, "learner" and "restricted" motorcycles may only have a 250 cc engine capacity, restricting 15-year-old learner riders to speeds of around, or a bit more than, 160 km/h (99.4 mph).
  • Note that on a learner licence on a motorcycle limits the rider to riding up to 70 km/h (maximum of 80 km/h in NSW, Australia), anything over this figure would be breaking the law.


The legal age to be eligible to apply for a New Zealand motorcycle licence is 15 years and over. New Zealand employs a three stage system for motor vehicle licensing. At age 15, an individual can gain their first licence known as their "learner licence". They must hold this for at least 6 months before they are able to move on to their "restricted licence". They must then hold this restricted licence for one and half years. After a period of 6–18 months, depending on age and additional training, a holder of a restricted licence may sit the third and final stage known as the "full licence". Until an individual has their full licence they are only able to ride a motorcycle which has an engine capacity of 250 cc or less.

A similar system is used in most states of Australia, with some variations. "Learners Permit" and "Provisional" licence holders must not have bikes that exceed a power-to-weight ratio of 150 kW/tonne or 660 cc, whichever comes first. All 250 cc bikes (with a few listed exceptions) are automatically included in this LAMS (Learner Approved Motorcycle Scheme) list.

Before getting a learners permit a pre-learner course is required, which issues a certificate of completion, valid for 3 months. Upon passing a computer test, the rider is granted a learners permit, which is valid for 12 months. Whilst on a learners permit, the rider may not carry a pillion or side car and may not exceed 80 kilometres per hour (49.7 mph) or the posted speed limit, whichever is lower, in certain jurisdictions.

To progress to a provisional licence, the rider must successfully complete a pre-provisional riders course, followed by a riding skills test called MOST (Motorcycle Operator Skill Test). The rider is then able to obtain a P1 provisional licence. These licences can be renewed and must be held without suspension for 12 months, after which time it can be upgraded to a P2 provisional licence, which is then to be held for 2 more years before the rider obtains their full licence, providing they have not breached any laws causing them to be suspended or disqualified in that period. P2 provisional riders are permitted to carry a pillion, P1 riders are not. There are exceptions to this rule for mature age licence holders, who may be eligible to bypass the P2 provisional period.

Canada and the US

In Canada and the United States three-wheeled motor vehicles fall under the auspices of motorcycle regulations.
The laws and regulations for legal moped usage in the U.S. vary by state.

In the United States, licensing requirements vary widely among the states and territories, but generally riders are required to pass written and practical (on-cycle) competency tests. In about half the states, successful completion of a rider education course (such as those offered by the Motorcycle Safety Foundation
Motorcycle Safety Foundation
The Motorcycle Safety Foundation is a United States national, not-for-profit organization, founded in 1973, and sponsored by the U.S. manufacturers and distributors of BMW, Ducati, Harley-Davidson, Honda, Kawasaki, KTM, Piaggio/Vespa, Suzuki, Triumph, Victory and Yamaha motorcycles...

) is accepted by state licensing agencies in lieu of examination. The specifics of the motorcycle and moped laws in the U.S. can be obtained from each individual state's Department of Motor Vehicles
Department of Motor Vehicles
In the United States of America, a Department of Motor Vehicles is a state-level government agency that administers vehicle registration and driver licensing. Similar departments exist in Canada...

 website.

United Kingdom

Motorcycle riders in the UK must normally take a one-day Compulsory Basic Training
Compulsory Basic Training
In the United Kingdom, the term Compulsory Basic Training is a preliminary vehicular training course which must be completed by people wishing to ride a motorcycle or moped unaccompanied on the road, and remains valid for 2 years upon completion...

 (CBT) course, regardless of which class of motorcycle they intend to ride. In addition a theory test must be taken prior to taking a practical test for any type of motorcycle licence.

Entry level to motorcycling at age 16 is the moped
Moped
Mopeds are a type of low-powered motorcycle designed to provide economical and relatively safe transport with minimal licensing requirements.Mopeds were once all equipped with bicycle-like pedals , but moped has been increasingly applied by governments to vehicles without pedals, based on their...

, a motorcycle of engine capacity no greater than 50 cc restricted to a maximum design speed of 50 km/h (31.1 mph).

At age 17 the rider may have a "light motorcycle" with an engine up to 125 cc and a power output not exceeding 11 kW. Only a CBT certificate, obtained within the past two years, and a provisional licence is needed to ride a learner motorcycle with an L-plate
L-plate
An L-plate is a square plate bearing a sans-serif letter L, for learner, which must be affixed to the front and back of a vehicle in many countries if its driver is a learner under instruction, or a motorcycle rider with provisional entitlement to ride restricted motorcycles.- Australia :In...

. After passing a test on a 125 cc machine, riders will be restricted to ride a "large restricted motorcycle", which has a maximum power output of 25 kW. After two years this restriction is lifted and any size or power of motorcycle may be ridden.

For riders over age 21 there is a direct access route to gaining a licence to ride a "large motorcycle" of any engine capacity or power, which allows somebody with no motorcycle experience to train and pass a test in around five days.

Three-wheeled vehicles weighing less than 8 cwt
Hundredweight
The hundredweight or centum weight is a unit of mass defined in terms of the pound . The definition used in Britain differs from that used in North America. The two are distinguished by the terms long hundredweight and short hundredweight:* The long hundredweight is defined as 112 lb, which...

 (896 lb / 406 kg) were long classified as motorcycles in the UK and could be driven with a full motorcycle licence. A requirement there be no reverse gear fitted was dropped in the 1960s. This exemption was linked to the enduring popularity of three-wheeled vehicles in the UK (such as the Reliant Regal
Reliant Regal
The Reliant Regal was a small three-wheeled car manufactured from 1953 until 1973 by the Reliant Motor Company in Tamworth, England. As it was a three-wheeler, and it was fairly lightweight, the vehicle could be driven on a motorcycle licence in the United Kingdom...

van) but was abolished for new licence holders in October 2000. Mass-production of three-wheelers ceased in 1998 but the licensing exemption still benefits trikes and their riders.
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK