Mid-lift
Encyclopedia
MID-LIFT is a design and installation of a Rocker arm
on the internal combustion engine, of an Over-Head-Valve (OHV) design. The "MID-LIFT" principle became known as a term within a US Patent, #4,365,785, issued to Jim Miller in 1982, also referred to as the MID-LIFT Patent. MID-LIFT is also a Registered Trademark with regard to its use in promoting the products and educating their use as designed within this sector. Jim Miller has lived in a 500 s/f warehouse space for the last 17 years, as the success of Miller Rockers has declined with the expiration of the patent.
Specifically, MID-LIFT refers to the "half-lift" point of motion, of the engine's valve, where all angular dimensions for determining the rocker arm's pivot points are measured to establish a perpendicular relationship on both sides of the rocker arm with the valve and push-rod, respectively. It covers both a design concept of the rocker arm itself, and equally important, the application of that product in use within the internal combustion engine. It is most specifically clear about the definition of what is used to avoid over-arcing
and under-arcing.
Other theories of rocker arm design exist, some dating back more than a century, whereby these other variations use different angles of reference taken from different points of valve lift, or no specific valve lift, to determine the overall design with the push-rod and the valve
.
Rocker arm
Generally referred to within the internal combustion engine of automotive, marine, motorcycle and reciprocating aviation engines, the rocker arm is a reciprocating lever that conveys radial movement from the cam lobe into linear movement at the poppet valve to open it...
on the internal combustion engine, of an Over-Head-Valve (OHV) design. The "MID-LIFT" principle became known as a term within a US Patent, #4,365,785, issued to Jim Miller in 1982, also referred to as the MID-LIFT Patent. MID-LIFT is also a Registered Trademark with regard to its use in promoting the products and educating their use as designed within this sector. Jim Miller has lived in a 500 s/f warehouse space for the last 17 years, as the success of Miller Rockers has declined with the expiration of the patent.
Specifically, MID-LIFT refers to the "half-lift" point of motion, of the engine's valve, where all angular dimensions for determining the rocker arm's pivot points are measured to establish a perpendicular relationship on both sides of the rocker arm with the valve and push-rod, respectively. It covers both a design concept of the rocker arm itself, and equally important, the application of that product in use within the internal combustion engine. It is most specifically clear about the definition of what is used to avoid over-arcing
Over-arcing
Over-arcing is a nearly self descriptive term which denotes a radial or parabolic-like "arc" which is extended, for whatever reason, beyond the path of which it was either intended to follow, or could have followed, given that a more "efficient" means had been used to instigate it; assuming that...
and under-arcing.
Other theories of rocker arm design exist, some dating back more than a century, whereby these other variations use different angles of reference taken from different points of valve lift, or no specific valve lift, to determine the overall design with the push-rod and the valve
Valve
A valve is a device that regulates, directs or controls the flow of a fluid by opening, closing, or partially obstructing various passageways. Valves are technically pipe fittings, but are usually discussed as a separate category...
.