Muda
Encyclopedia
is a traditional Japanese term for an activity that is wasteful and doesn't add value or is unproductive, etymologically
none (無)+ trivia
or un-useful (駄) in practice or others. It is also a key concept in the Toyota Production System
(TPS) and is one of the three types of waste (muda, mura
, muri
) that it identifies. Waste reduction is an effective way to increase profitability. Toyota merely picked up these three words beginning with the prefix
mu-, which in Japan are widely recognized as a reference to a product improvement program or campaign.
A process adds value by producing goods or providing a service that a customer will pay for. A process consumes resources and waste occurs when more resources are consumed than are necessary to produce the goods or provide the service that the customer actually wants. The attitudes and tools of the TPS heighten awareness and give whole new perspectives on identifying waste and therefore the unexploited opportunities associated with reducing waste.
Muda has been given much greater attention as waste than the other two which means that whilst many Lean practitioners have learned to see muda they fail to see in the same prominence the wastes of mura
(unevenness) and muri
(overburden). Thus whilst they are focused on getting their process under control they do not give enough time to process improvement by redesign.
and TPS
is the identification of which steps add value and which do not. By classifying all the process activities into these two categories it is then possible to start actions for improving the former and eliminating the latter. Some of these definitions may seem rather 'idealist' but this tough definition is seen as important to the effectiveness of this key step. Once value-adding work has been separated from waste then waste can be subdivided into 'needs to be done but non-value adding' waste and pure waste. The clear identification of 'non-value adding work', as distinct from waste or work, is critical to identifying the assumptions and beliefs behind the current work process and to challenging them in due course.
The expression "Learning to see" comes from an ever developing ability to see waste where it was not perceived before. Many have sought to develop this ability by 'trips to Japan' to visit Toyota to see the difference between their operation and one that has been under continuous improvement for thirty years under the TPS
. Shigeo Shingo
, a co-developer of TPS, observed that it's only the last turn of a bolt that tightens it - the rest is just movement. This level of refined 'seeing' of waste has enabled him to cut car body die changeover time to less than 3% of its duration in the 1950s as of 2010. Note that this period has allowed all the supporting services to adapt to this new capability and for the changeover time to undergo multiple improvements. These multiple improvements were in new technologies, refining value required by 'downstream' processes and by internal process redesigns.
The following "seven wastes" identify resources which are commonly wasted. They were identified by Toyota's Chief Engineer, Taiichi Ohno
as part of the Toyota Production System
:
This has significance to damage, wear and safety.
It also includes the fixed assets and expenses incurred in the production.
Whenever goods are not in transport or being processed, they are waiting. In traditional processes, a large part of an individual product's life is spent waiting to be worked on.
An easy way to remember the 7 wastes is TIMWOOD.
These employees have other skills too, it is wasteful to not take advantage of these skills as well.
"It is only by capitalizing on employees' creativity that organizations can eliminate the other seven wastes and continuously improve their performance."
). This starkly throws most of operations into the waste category.
Many of the TPS/Lean techniques work in a similar way. By planning to reduce manpower, or reduce change-over times, or reduce campaign lengths, or reduce lot sizes the question of waste comes immediately into focus upon those elements that prevent the plan being implemented. Often it is in the operations area rather than the process area that muda can be eliminated and remove the blockage to the plan. Tools of many types and methodologies can then be employed on these wastes to reduce or eliminate them.
The plan is therefore to build a fast, flexible process where the immediate impact is to reduce waste and therefore costs. By ratcheting the process towards this aim with focused muda reduction to achieve each step, the improvements are 'locked in' and become required for the process to function. Without this intent to build a fast, flexible process there is a significant danger that any improvements achieved will not be sustained because they are just desirable and can slip back towards old behaviours without the process stopping.
Etymology
Etymology is the study of the history of words, their origins, and how their form and meaning have changed over time.For languages with a long written history, etymologists make use of texts in these languages and texts about the languages to gather knowledge about how words were used during...
none (無)+ trivia
Trivia
The trivia are the three lower Artes Liberales, i.e. grammar, rhetoric and logic. These were the topics of basic education, foundational to the quadrivia of higher education, and hence the material of basic education, of interest only to undergraduates...
or un-useful (駄) in practice or others. It is also a key concept in the Toyota Production System
Toyota Production System
The Toyota Production System is an integrated socio-technical system, developed by Toyota, that comprises its management philosophy and practices. The TPS organizes manufacturing and logistics for the automobile manufacturer, including interaction with suppliers and customers...
(TPS) and is one of the three types of waste (muda, mura
Mura (Japanese term)
Mura is traditional general Japanese term for unevenness, irregularity or inconsistency in physical matter or human spiritual condition. It is also a key concept in performance improvement systems such as the Toyota Production System. Mura is one of the three types of waste . Waste reduction is an...
, muri
Muri (Japanese term)
Muri is a Japanese term for overburden, unreasonableness or absurdity, which has become popularized in the West by its use as a key concept in the Toyota Production System.-Avoidance of muri in Toyota manufacturing:...
) that it identifies. Waste reduction is an effective way to increase profitability. Toyota merely picked up these three words beginning with the prefix
Prefix
A prefix is an affix which is placed before the root of a word. Particularly in the study of languages,a prefix is also called a preformative, because it alters the form of the words to which it is affixed.Examples of prefixes:...
mu-, which in Japan are widely recognized as a reference to a product improvement program or campaign.
A process adds value by producing goods or providing a service that a customer will pay for. A process consumes resources and waste occurs when more resources are consumed than are necessary to produce the goods or provide the service that the customer actually wants. The attitudes and tools of the TPS heighten awareness and give whole new perspectives on identifying waste and therefore the unexploited opportunities associated with reducing waste.
Muda has been given much greater attention as waste than the other two which means that whilst many Lean practitioners have learned to see muda they fail to see in the same prominence the wastes of mura
Mura (Japanese term)
Mura is traditional general Japanese term for unevenness, irregularity or inconsistency in physical matter or human spiritual condition. It is also a key concept in performance improvement systems such as the Toyota Production System. Mura is one of the three types of waste . Waste reduction is an...
(unevenness) and muri
Muri (Japanese term)
Muri is a Japanese term for overburden, unreasonableness or absurdity, which has become popularized in the West by its use as a key concept in the Toyota Production System.-Avoidance of muri in Toyota manufacturing:...
(overburden). Thus whilst they are focused on getting their process under control they do not give enough time to process improvement by redesign.
The seven wastes
One of the key steps in LeanLean manufacturing
Lean manufacturing, lean enterprise, or lean production, often simply, "Lean," is a production practice that considers the expenditure of resources for any goal other than the creation of value for the end customer to be wasteful, and thus a target for elimination...
and TPS
Toyota Production System
The Toyota Production System is an integrated socio-technical system, developed by Toyota, that comprises its management philosophy and practices. The TPS organizes manufacturing and logistics for the automobile manufacturer, including interaction with suppliers and customers...
is the identification of which steps add value and which do not. By classifying all the process activities into these two categories it is then possible to start actions for improving the former and eliminating the latter. Some of these definitions may seem rather 'idealist' but this tough definition is seen as important to the effectiveness of this key step. Once value-adding work has been separated from waste then waste can be subdivided into 'needs to be done but non-value adding' waste and pure waste. The clear identification of 'non-value adding work', as distinct from waste or work, is critical to identifying the assumptions and beliefs behind the current work process and to challenging them in due course.
The expression "Learning to see" comes from an ever developing ability to see waste where it was not perceived before. Many have sought to develop this ability by 'trips to Japan' to visit Toyota to see the difference between their operation and one that has been under continuous improvement for thirty years under the TPS
Toyota Production System
The Toyota Production System is an integrated socio-technical system, developed by Toyota, that comprises its management philosophy and practices. The TPS organizes manufacturing and logistics for the automobile manufacturer, including interaction with suppliers and customers...
. Shigeo Shingo
Shigeo Shingo
, born in Saga City, Japan, was a Japanese industrial engineer who distinguished himself as one of the world’s leading experts on manufacturing practices and the Toyota Production System. Shingo is known far more in the West than in Japan, as a result of his meeting Norman Bodek, an American...
, a co-developer of TPS, observed that it's only the last turn of a bolt that tightens it - the rest is just movement. This level of refined 'seeing' of waste has enabled him to cut car body die changeover time to less than 3% of its duration in the 1950s as of 2010. Note that this period has allowed all the supporting services to adapt to this new capability and for the changeover time to undergo multiple improvements. These multiple improvements were in new technologies, refining value required by 'downstream' processes and by internal process redesigns.
The following "seven wastes" identify resources which are commonly wasted. They were identified by Toyota's Chief Engineer, Taiichi Ohno
Taiichi Ohno
was a prominent Japanese businessman. He is considered to be the father of the Toyota Production System, which became Lean Manufacturing in the U.S. He devised the seven wastes as part of this system. He wrote several books about the system, including Toyota Production System: Beyond Large-Scale...
as part of the Toyota Production System
Toyota Production System
The Toyota Production System is an integrated socio-technical system, developed by Toyota, that comprises its management philosophy and practices. The TPS organizes manufacturing and logistics for the automobile manufacturer, including interaction with suppliers and customers...
:
Transportation
Each time a product is moved it stands the risk of being damaged, lost, delayed, etc. as well as being a cost for no added value. Transportation does not make any transformation to the product that the consumer is supposed to pay for.Inventory
Inventory, be it in the form of raw materials, work-in-progress (WIP), or finished goods, represents a capital outlay that has not yet produced an income either by the producer or for the consumer. Any of these three items not being actively processed to add value is waste.Motion
As compared to Transportation, Motion refers to the producer, worker or equipment.This has significance to damage, wear and safety.
It also includes the fixed assets and expenses incurred in the production.
Waiting
or (WIP) Work in ProcessWhenever goods are not in transport or being processed, they are waiting. In traditional processes, a large part of an individual product's life is spent waiting to be worked on.
Over-processing
Over-processing occurs any time more work is done on a piece than what is required by the customer. This also includes using tools that are more precise, complex, or expensive than absolutely required.Over-production
Overproduction occurs when more product is produced than is required at that time by your customers. One common practice that leads to this muda is the production of large batches, as often consumer needs change over the long times large batches require. Overproduction is considered the worst muda because it hides and/or generates all the others. Overproduction leads to excess inventory, which then requires the expenditure of resources on storage space and preservation, activities that do not benefit the customer.Defects
Whenever defects occur, extra costs are incurred reworking the part, rescheduling production, etc.An easy way to remember the 7 wastes is TIMWOOD.
- T: Transportation
- I: Inventory
- M: Motion
- W: Wait
- O: Over-processing
- O: Over-production
- D: Defect
Other candidate wastes
Other sources have proposed additional wastes. These may work for the proposers or they may overlap or be inconsistent with the originals which came from a coherent source.Latent skill
Organizations employ their staff for specific skills that they may have.These employees have other skills too, it is wasteful to not take advantage of these skills as well.
"It is only by capitalizing on employees' creativity that organizations can eliminate the other seven wastes and continuously improve their performance."
Implementation
Shigeo Shingo divides process related activity into Process and Operation. He distinguishes "Process", the course of material that is transformed into product, from "Operation" which are the actions performed on the material by workers and machines. This distinction is not generally recognized because most people would view the "Operations" performed on the raw materials of a product by workers and machines as the "Process" by which those raw materials are transformed into the final product. He makes this distinction because value is added to the product by the process but not by most of the operations. He states that whereas many see Process and Operations in parallel he sees them at right angles (orthogonal) (see Value Stream MappingValue Stream Mapping
Value stream mapping is a lean manufacturing technique used to analyze and design the flow of materials and information required to bring a product or service to a consumer. At Toyota, where the technique originated, it is known as "material and information flow mapping"...
). This starkly throws most of operations into the waste category.
Many of the TPS/Lean techniques work in a similar way. By planning to reduce manpower, or reduce change-over times, or reduce campaign lengths, or reduce lot sizes the question of waste comes immediately into focus upon those elements that prevent the plan being implemented. Often it is in the operations area rather than the process area that muda can be eliminated and remove the blockage to the plan. Tools of many types and methodologies can then be employed on these wastes to reduce or eliminate them.
The plan is therefore to build a fast, flexible process where the immediate impact is to reduce waste and therefore costs. By ratcheting the process towards this aim with focused muda reduction to achieve each step, the improvements are 'locked in' and become required for the process to function. Without this intent to build a fast, flexible process there is a significant danger that any improvements achieved will not be sustained because they are just desirable and can slip back towards old behaviours without the process stopping.
See also
- Lean manufacturingLean manufacturingLean manufacturing, lean enterprise, or lean production, often simply, "Lean," is a production practice that considers the expenditure of resources for any goal other than the creation of value for the end customer to be wasteful, and thus a target for elimination...
- Lean software developmentLean software developmentLean software development is a translation of Lean manufacturing and Lean IT principles and practices to the software development domain. Adapted from the Toyota Production System, a pro-lean subculture is emerging from within the Agile community....
- Agile software developmentAgile software developmentAgile software development is a group of software development methodologies based on iterative and incremental development, where requirements and solutions evolve through collaboration between self-organizing, cross-functional teams...
- Total Quality ManagementTotal Quality ManagementTotal quality management or TQM is an integrative philosophy of management for continuously improving the quality of products and processes....