In telecommunication

Telecommunication

Telecommunication is the transmission of information over significant distances to communicate. In earlier times, telecommunications involved the use of visual signals, such as beacons, smoke signals, semaphore telegraphs, signal flags, and optical heliographs, or audio messages via coded...

, the term multiplex baseband has the following meanings:

1. In frequency-division multiplexing

Frequency-division multiplexing

Frequency-division multiplexing is a form of signal multiplexing which involves assigning non-overlapping frequency ranges to different signals or to each "user" of a medium.- Telephone :...

, the frequency band occupied by the aggregate of the signals in the line

Line (electrical engineering)

In electrical engineering, a line is, more generally, any circuit of an electrical system. This electric circuit loop , consists of electrical elements connected directly by conductor terminals to other devices in series....

 interconnecting the multiplexing and radio

Radio

Radio is the transmission of signals through free space by modulation of electromagnetic waves with frequencies below those of visible light. Electromagnetic radiation travels by means of oscillating electromagnetic fields that pass through the air and the vacuum of space...

 or line equipment.

2. In frequency division multiplexed carrier

Carrier wave

In telecommunications, a carrier wave or carrier is a waveform that is modulated with an input signal for the purpose of conveying information. This carrier wave is usually a much higher frequency than the input signal...

 systems, at the input to any stage of frequency translation, the frequency band occupied.

Note: For example, the output

Output

Output is the term denoting either an exit or changes which exit a system and which activate/modify a process. It is an abstract concept, used in the modeling, system design and system exploitation.-In control theory:...

 of a group multiplexer

Multiplexer

In electronics, a multiplexer is a device that selects one of several analog or digital input signals and forwards the selected input into a single line. A multiplexer of 2n inputs has n select lines, which are used to select which input line to send to the output...

 consists of a band of frequencies from 60 kHz to 108 kHz. This is the group-level baseband

Baseband

In telecommunications and signal processing, baseband is an adjective that describes signals and systems whose range of frequencies is measured from close to 0 hertz to a cut-off frequency, a maximum bandwidth or highest signal frequency; it is sometimes used as a noun for a band of frequencies...

 that results from combining 12 voice-frequency input channels, having a bandwidth of 4 kHz each, including guard bands. In turn, 5 groups are multiplexed into a super group having a baseband of 312 kHz to 552 kHz. This baseband, however, does not represent a group-level baseband. Ten super groups are in turn multiplexed into one master group, the output of which is a baseband that may be used to modulate a microwave

Microwave

Microwaves, a subset of radio waves, have wavelengths ranging from as long as one meter to as short as one millimeter, or equivalently, with frequencies between 300 MHz and 300 GHz. This broad definition includes both UHF and EHF , and various sources use different boundaries...

-frequency carrier.