Panning (audio)
Encyclopedia
Panning is the spread of a sound signal (either monaural
or stereophonic pairs) into a new stereo
or multi-channel sound field. A typical physical recording console pan control is a knob with a pointer which can be placed from the 8 o'clock
dial position fully left to the 4 o'clock position fully right. Audio mixing software replaces the knob with an on-screen "virtual knob" or slider for each audio source track which functions identically to its counterpart on a physical mix console.
The control knob is designed to distribute its source sounds with constant power, so that at the full left extreme, with the knob pointing to the 8 o'clock position, the sound appears in only the left channel, with all the energy going exclusively to the left channel (speaker). Conversely, when placed in the far right extreme, that is the 4 o'clock position, the sound only appears in the right. In the middle, at the 12 noon position, the sound in each channel is evenly distributed, but decreased in each channel by the law amount, thereby distributing the left and right energy equally across the two output channels, so that the overall sound power level is always constant regardless of the knob position. Because of the phantom center
phenomenon, any sound placed at the 12 noon position appears to be coming from preciselybetween the left and right speakers, because the brain sees sounds equally from left and right, and concludes that the sound must be coming from a source located between the two speakers.
The pan control in audio gets its name from panorama or panning
action in moving image technology. The audio pan control can be used in a mix to create the impression that a source is moving from one side of the soundstage to the other, although ideally there would be timing and reverberation differences present for a more complete picture of movement within a defined space. Simple analog pan controls only change relative level; they don't add reverb to replace direct signal or change delay timing.
Panning can also be used in an audio mixer to reduce or reverse the stereo width of a stereo signal. For instance, the left and right channels of a stereo source can be panned 'straight up', that is sent equally to both the left output and the right output of the mixer, creating a dual mono signal.
The pan control or pan pot (panoramic potentiometer) has an internal architecture which determines how much of each source signal is sent to the two buses that are fed by the pan control. The power curve is called taper or law. Pan control law might be designed to send -4.5 dB to each bus when centered or 'straight up' or it might have -6 dB or -3 dB in the center. If the two output buses are further combined to make a mono signal, then a pan control law of -6 dB is optimum. If the two output buses are to remain stereo then a pan control law of -3 dB is optimum. Pan control law of -4.5 dB is a compromise between the two.
A pan control fully rotated to one side results in the source being sent at full strength to one bus (either the left or right channel) and zero strength to the other.
The pan pot is not the same as a balance control on a consumer stereo receiver. The balance control takes a stereo source and varies the relative level of the two channels. The left channel will never come out of the right speaker by the action of a balance control. A pan control can send the left channel to either the left or the right speakers or anywhere in between. Note that mixers which have stereo input channels controlled by a single pan pot are in fact using the balance control architecture in those channels, not pan control.
An early panning process was used in the development of Fantasound
, an early pioneering stereophonic sound reproduction system for Fantasia
(1940).
Monaural
Monaural or monophonic sound reproduction is single-channel. Typically there is only one microphone, one loudspeaker, or channels are fed from a common signal path...
or stereophonic pairs) into a new stereo
Stereophonic sound
The term Stereophonic, commonly called stereo, sound refers to any method of sound reproduction in which an attempt is made to create an illusion of directionality and audible perspective...
or multi-channel sound field. A typical physical recording console pan control is a knob with a pointer which can be placed from the 8 o'clock
Clock position
Clock position is a way of communicating the relative direction of an object using the analogy of a 12-hour clock. One imagines a clock face lying either upright or flat in front of oneself, and identifies the twelve hour markings with the directions in which they point.Using this analogy, 12...
dial position fully left to the 4 o'clock position fully right. Audio mixing software replaces the knob with an on-screen "virtual knob" or slider for each audio source track which functions identically to its counterpart on a physical mix console.
The control knob is designed to distribute its source sounds with constant power, so that at the full left extreme, with the knob pointing to the 8 o'clock position, the sound appears in only the left channel, with all the energy going exclusively to the left channel (speaker). Conversely, when placed in the far right extreme, that is the 4 o'clock position, the sound only appears in the right. In the middle, at the 12 noon position, the sound in each channel is evenly distributed, but decreased in each channel by the law amount, thereby distributing the left and right energy equally across the two output channels, so that the overall sound power level is always constant regardless of the knob position. Because of the phantom center
Phantom center
Phantom center refers to the way human ears detect the location of a sound; straight ahead, above, or behind the head. Since humans have one ear on each side of the head, sound in aforementioned locations creates an equal sensation in each ear. Thus, based only on hearing, the sound can be...
phenomenon, any sound placed at the 12 noon position appears to be coming from preciselybetween the left and right speakers, because the brain sees sounds equally from left and right, and concludes that the sound must be coming from a source located between the two speakers.
The pan control in audio gets its name from panorama or panning
Panning (camera)
In photography, panning refers to the horizontal movement or rotation of a still or video camera, or the scanning of a subject horizontally on video or a display device...
action in moving image technology. The audio pan control can be used in a mix to create the impression that a source is moving from one side of the soundstage to the other, although ideally there would be timing and reverberation differences present for a more complete picture of movement within a defined space. Simple analog pan controls only change relative level; they don't add reverb to replace direct signal or change delay timing.
Panning can also be used in an audio mixer to reduce or reverse the stereo width of a stereo signal. For instance, the left and right channels of a stereo source can be panned 'straight up', that is sent equally to both the left output and the right output of the mixer, creating a dual mono signal.
The pan control or pan pot (panoramic potentiometer) has an internal architecture which determines how much of each source signal is sent to the two buses that are fed by the pan control. The power curve is called taper or law. Pan control law might be designed to send -4.5 dB to each bus when centered or 'straight up' or it might have -6 dB or -3 dB in the center. If the two output buses are further combined to make a mono signal, then a pan control law of -6 dB is optimum. If the two output buses are to remain stereo then a pan control law of -3 dB is optimum. Pan control law of -4.5 dB is a compromise between the two.
A pan control fully rotated to one side results in the source being sent at full strength to one bus (either the left or right channel) and zero strength to the other.
The pan pot is not the same as a balance control on a consumer stereo receiver. The balance control takes a stereo source and varies the relative level of the two channels. The left channel will never come out of the right speaker by the action of a balance control. A pan control can send the left channel to either the left or the right speakers or anywhere in between. Note that mixers which have stereo input channels controlled by a single pan pot are in fact using the balance control architecture in those channels, not pan control.
An early panning process was used in the development of Fantasound
Fantasound
Fantasound was a stereophonic sound reproduction system developed by the engineers of Walt Disney studios for its 1940 animated film Fantasia, the first commercial film to be released in stereo. Fantasound led to the development of what is known today as surround sound.-Origins:Walt Disney's...
, an early pioneering stereophonic sound reproduction system for Fantasia
Fantasia (film)
Fantasia is a 1940 American animated film produced by Walt Disney and released by Walt Disney Productions. The third feature in the Walt Disney Animated Classics series, the film consists of eight animated segments set to pieces of classical music conducted by Leopold Stokowski, seven of which are...
(1940).