Product Miniature Corporation
Encyclopedia
Product Miniature Company, or PMC for short, was a company that manufactured various pre-assembled plastic promotional models, banks and toys in Milwaukee, Wisconsin
. It was started by brothers William Edward "Ed" and Paul Ford in 1946 and ended car model production about 1965. In 1958 or 1959 the company moved to Pewaukee, west of Milwaukee and remains there to this day, but but now not normally producing toy or promotional cars (Timm 2010 Product Miniature page).
, and Jo-Han
. PMC's vehicle products were called "Tru Miniatures".
PMC introduced its first models about 1947, around the same time as Ideal Models, which later changed its name to Jo-Han
. Though Banthrico and National Products models were metal, PMC, along with Jo-Han, were the first promotional companies to introduce plastic models to dealerships, both beating AMT by a year or so. Models were molded in cellulose acetate, which tended to warp over time. Among automotive promotional model makers, PMC and SMP were the only promotional companies that produced nearly all of their products through the 1950s in warping plastic, as they were largely defunct by the time non-warping styrene was introduced. In the early 1960s, PMC did produce some commercial toys in styrene.
PMC's Chevrolet products, like Banthrico, were in the form of banks. Many bank models had the inscription on the bottom "To help save for a rainy day, or to buy a new Chevrolet" (Hover 2010). Banthrico and PMC set the stage for future manufacturers like AMT and Jo-Han, producing almost exclusively in 1:25 scale, though a few Chevrolets and Plymouths, like the 1953 Chevrolet Handyman and the early Plymouth Suburban, were produced in a larger 1:20th scale (Hover 2010).
Apart from products for the Big Three, the company also made a few promotionals for independent companies, like a 1952-1953 bathtub Nash, and the large Trailways Thru Liner bus (Timm 2010 'Miscellaneous' page and PC Literature page 5), and the Oscar Meyer Weinermobile in 1954, 1992, and 1996 variations (Timm 2010, Photo Gallery Weinermobiles). GM offerings in the late 1950s spilled over to European Opel, when the Rekord was made for 1959 (and beyond in commercial styrene form). They even made a Volkswagen Beetle in the late '50s and early '60s, but it was unlikely the bug was actually a promotional for German VW.
livery (Timm 2010, PMC Gallery Diamond T).
PMC's early International models were usually molded in bright yellows, oranges, reds, and sky blues and were toy-like, but very attractive. Many of these were not promotional models, exactly, rather display models for the showroom. Some 1951 trucks can be found with a hole in the roof and chassis where a metal display post passed through the vehicle. Besides a pickup truck, the 1951 line featured a larger dumper/flatbed truck, a flatbed stake truck, and a moving truck. The 1955 International pickup was later offered by Canadian Kempro, of London, Ontario (Hover 2011). The 1955, 1956 and 1957 pickups show a decade long PMC relationship with IH and were cast in more realistic promo style.
In the 1990s, the Slivka brothers, Tony and Bill, brothers contacted the Fords about machining for older model cars. They were able to purchase the 1956 International Triple Diamond pickup dies just before the company was going to scrap the casting equipment. Several of these were produced by the Slivkas as Triple Diamond Replicas out of Des Plaines, Illinois (Timm 2010, PMC Gallery-S-100 pickups).
One of the more unique International promotionals was the boxy Metro delivery van which International made from 1948 to about 1959. PMC's Metro appears to have been made in the later 1950s, and was one of the company's last promotional offerings. It had an opening rear door which slid outward from the rear of the van, revealing storage space inside. This model was offered in a common light yellow, a purple, and a less common lime green. The PMC offering was often packaged in a toy-like plastic bag stapled to a cardboard hanging card. One recent eBay offering of the Metro in original packaging was being sold for $200.00.
The Plymouths were not as promotionally sophisticated at PMC's Chevys. Though the models were handsome, original manufacturers' paints were not applied, there were no interiors, and the molding and detail were not as precise. Perhaps the Plymouths represent a natural blend in product ideology between the more toy-like IH offerings and the serious promoting that was to come with Chevrolet.
The first Chevys offered in 1951 were in regular sedan as well as 'fastback' Fleetline versions. Previous to this, National Products and Banthrico had offered Chevy models (Automotive News 1949). The first Bel Airs were offered in 1953; a 4 door sedan and convertibles in several colors. A more basic smooth sided '53 Chevrolet 150 sedan was also offered (Clarence Young Autohobby). 1954 brought similar offerings. At least on Chevy, the '55 sedan was offered in remote control form.
The 150 sedan shows an interesting trend in promotional offerings when comparing the early 1950s with the early 1960s. The pre-performance, post-war era of practicality in the early '50s gave emphasis to more economical sedans, so it is notable that early promotional model makers commonly molded vehicles in 4-door configurations even in the most basic models available. Four door Bel Airs were offered by PMC all the way up to 1958, one available with police decor. By about 1960, however, most promotional makers only modeled sportier and more powerful 2-door coupes and hardtops, in a new era of a stronger economy, more affluent clientele and the new baby-boomer driver's market.
America's first sports car, the 1954 Corvette, was made by PMC. It was produced with a removable sports hardtop (Timm 2010, PMC literature, page 8). Later Corvettes, up through at least 1958, were also offered. The 1958 Chevy smooth-sided Cameo pickup truck was another PMC model.
In the early 1960s, the toy company Korris Kars offered a '59 Ranchero and Country wagon in a less detailed softer and more flexible polyurethane plastic. At first glance it appears to be a reworking of the PMC casting, but it is not. They were done in 1:25 scale, and did not have a metal chassis, rather one entire body casting to which axles were directly attached. As such, they had crude interiors, once again, as part of the whole body casting. The black plastic wheels had stick-on hubcaps.
One can stumble upon a 1959 Ford Custom 300 2 door hardtop made by Promolite Resin Models around 2010 that might fool one into thinking this was a PMC offering. PMC, however, only made Ranchero and Country wagon versions. Promolite Resin Models made its Custom 300 body to fit a PMC chassis - so, voila!, a new old PMC !
Chassis detail varied quite a bit in different models. Though more toy-like in execution, early International pickups had detailed plastic bases with engine, exhaust and suspension details clearly molded. Starting about 1954, though, most bases/chassis were made of metal, which apparently added structural strength for friction motors that started to be popular in many promotionals. For example, the 1955 Bel Air without friction motor had a chassis completely smooth and molded in plastic, while the 1954 Corvette, with "spin-torque motor" (as PMC called it), had a metal base. Though PMC offered no promotionals after 1960, other promotional model makers found the new and harder styrene plastic durable enough to support the motor. Also, plastic bases did not rust over time.
PMC Chevrolet models often came colored with actual GM colors. The name of the color would actually be stamped in white or black depending on the shade of the car (for example, "Woodland Green", "Sungold" or "Campus Cream"). The color would be printed on the center of the roof parallel with side windows (Hover 2010). In the case of the 1953 Bel Air convertible, the name was found on the center of the trunk lid, printed parallel with the bumpers.
Tires were black rubber often with a whitewall. Early PMC wheels on IH trucks were attractive red plastic with a small metal hub. These also appeared on many Chevys. Some of the wheels were simple "moon" type style, while some of the International and Plymouth wheels were a less attractive simple white plastic hub which commonly yellowed and became brittle with time. Usually the wheels were generic and not rendered with accuracy to the real cars, but this was the 1950s. An exception appears to have been the 1959 Ford Ranchero which had realistic renderings of the car's actual hubcaps.
gained contracts for plastic promos of the Ford station wagon, which it carried over through 1962, apparently pushing PMC out of the promotional business.
After 1959, PMC's history gets fuzzy. PMC, or another caster using PMC's dies, later made simplified retail toy versions of earlier models up to as late as about 1965. Available at dime stores like G. C. Murphys, the Ranchero, Beetle, Opel, 1958 Chevrolet Cameo pickup, and probably others, were offered in a more simple style in non-warping styrene (Scale Auto Magazine 2004). They were simplified from the promo versions, with no interiors or windows and wheels were solid black styrene with or without whitewalls. The earlier of these retail versions of the Ranchero were still molded in two-tone colors, but later, solid colors were used (turquoise green or red were two choices). These were offered as either unassembled kits or assembled models, sometimes poly-bagged (Scale Auto Magazine 2004).
It appears 1959 was a pivotal year for promotional model makers, and PMC in particular. Perhaps some of the company's decline had to do with the expense of engineering the new non-warping styrene plastic mixed with the tooling required to make the ever more popular kits that other manufacturers took up. PMC's kits were very simple and not as well known as those of AMT, SMP or Jo-Han. As a company, Jo-Han did well, but was always the lesser of the Big Three (being AMT, MPC
and JoHan. Venerable maker SMP was absorbed by AMT, but PMC was several rungs down the promo ladder by 1960 and gradually weakened through the decade.
Another blow to PMC's car production was Hubley's contract for 1960 through 1962 Ford wagons and hardtops, a niche that PMC had in 1959. Adding insult to injury, Ford dropped its full-size Ranchero model and neither did PMC get the contract for the new Falcon-based pickup. Perhaps the company's decision to exit production of promotional and car models was also due to a peripheral headquarters location in Milwaukee – away from close contact with Detroit's design offices.
PMC, after establishing some unique niches for itself with GM and IH over a decade, diminished into retail toy markets for a few years, and then abandoned most car model production. Today known as PM Plastics the company is still headquartered in Pewaukee, Wisconsin and makes plastic trays, containers, exercise steps, ramps, and other products (though a neat pontoon plane is shown on the company website (PM Plastics website). The company president is Bill Ford (son of founder Ed) and family member Gerald Ford is sales manager (Timm 2010 Product Miniature page).
Milwaukee, Wisconsin
Milwaukee is the largest city in the U.S. state of Wisconsin, the 28th most populous city in the United States and 39th most populous region in the United States. It is the county seat of Milwaukee County and is located on the southwestern shore of Lake Michigan. According to 2010 census data, the...
. It was started by brothers William Edward "Ed" and Paul Ford in 1946 and ended car model production about 1965. In 1958 or 1959 the company moved to Pewaukee, west of Milwaukee and remains there to this day, but but now not normally producing toy or promotional cars (Timm 2010 Product Miniature page).
A first in plastic
In the late 1940s and early 1950s, PMCs main rivals in promotional vehicle models were Banthrico, National Products, AMT, SMPSMP
-In technology:* Shape memory polymers, in the field of chemical engineering.* Simulation Model Portability: A standard developed by ESA and ECSS for space mission simulators....
, and Jo-Han
Jo-Han
Jo-Han is a manufacturer of plastic scale model car promotionals and kits originally based in Detroit. The company was founded there in 1947 by tool and die maker John Hanley - a year before West Gallogly's AMT and about the same time as PMC...
. PMC's vehicle products were called "Tru Miniatures".
PMC introduced its first models about 1947, around the same time as Ideal Models, which later changed its name to Jo-Han
Jo-Han
Jo-Han is a manufacturer of plastic scale model car promotionals and kits originally based in Detroit. The company was founded there in 1947 by tool and die maker John Hanley - a year before West Gallogly's AMT and about the same time as PMC...
. Though Banthrico and National Products models were metal, PMC, along with Jo-Han, were the first promotional companies to introduce plastic models to dealerships, both beating AMT by a year or so. Models were molded in cellulose acetate, which tended to warp over time. Among automotive promotional model makers, PMC and SMP were the only promotional companies that produced nearly all of their products through the 1950s in warping plastic, as they were largely defunct by the time non-warping styrene was introduced. In the early 1960s, PMC did produce some commercial toys in styrene.
PMC's Chevrolet products, like Banthrico, were in the form of banks. Many bank models had the inscription on the bottom "To help save for a rainy day, or to buy a new Chevrolet" (Hover 2010). Banthrico and PMC set the stage for future manufacturers like AMT and Jo-Han, producing almost exclusively in 1:25 scale, though a few Chevrolets and Plymouths, like the 1953 Chevrolet Handyman and the early Plymouth Suburban, were produced in a larger 1:20th scale (Hover 2010).
Main clients
International Harvester was a regular client throughout PMC's existence with trucks models produced as late as 1957. PMC regularly worked with GM, specifically Chevrolet, while AMT cornered most Ford products, and Jo-Han most Chrysler products. Yet PMC did make 1955-1959 Ford Country Station wagons (and the 1959 Ranchero). The 1959 Fords were one of PMC's last promotional offerings.Apart from products for the Big Three, the company also made a few promotionals for independent companies, like a 1952-1953 bathtub Nash, and the large Trailways Thru Liner bus (Timm 2010 'Miscellaneous' page and PC Literature page 5), and the Oscar Meyer Weinermobile in 1954, 1992, and 1996 variations (Timm 2010, Photo Gallery Weinermobiles). GM offerings in the late 1950s spilled over to European Opel, when the Rekord was made for 1959 (and beyond in commercial styrene form). They even made a Volkswagen Beetle in the late '50s and early '60s, but it was unlikely the bug was actually a promotional for German VW.
International Harvester
PMC regularly offered International Harvester trucks, mainly pickups. A 1947 International pickup truck may have been the first PMC model offered, and one of the first plastic promotional models, period (Hover 2010). It was made slightly larger than the normal 1:25 scale. Some reproductions of IH's brand of Farmall tractors were also offered as promotionals, some hauling a McCormick-Deering trailer (Timm 2010, PMC Farm Tractors page). An International TD-24 bulldozer was made in a promo/toy version and also in remote control. Several Diamond-T semi tractor-trailer trucks (Diamond-T had been purchased by International) were also made, one in MayflowerMayflower
The Mayflower was the ship that transported the English Separatists, better known as the Pilgrims, from a site near the Mayflower Steps in Plymouth, England, to Plymouth, Massachusetts, , in 1620...
livery (Timm 2010, PMC Gallery Diamond T).
PMC's early International models were usually molded in bright yellows, oranges, reds, and sky blues and were toy-like, but very attractive. Many of these were not promotional models, exactly, rather display models for the showroom. Some 1951 trucks can be found with a hole in the roof and chassis where a metal display post passed through the vehicle. Besides a pickup truck, the 1951 line featured a larger dumper/flatbed truck, a flatbed stake truck, and a moving truck. The 1955 International pickup was later offered by Canadian Kempro, of London, Ontario (Hover 2011). The 1955, 1956 and 1957 pickups show a decade long PMC relationship with IH and were cast in more realistic promo style.
In the 1990s, the Slivka brothers, Tony and Bill, brothers contacted the Fords about machining for older model cars. They were able to purchase the 1956 International Triple Diamond pickup dies just before the company was going to scrap the casting equipment. Several of these were produced by the Slivkas as Triple Diamond Replicas out of Des Plaines, Illinois (Timm 2010, PMC Gallery-S-100 pickups).
One of the more unique International promotionals was the boxy Metro delivery van which International made from 1948 to about 1959. PMC's Metro appears to have been made in the later 1950s, and was one of the company's last promotional offerings. It had an opening rear door which slid outward from the rear of the van, revealing storage space inside. This model was offered in a common light yellow, a purple, and a less common lime green. The PMC offering was often packaged in a toy-like plastic bag stapled to a cardboard hanging card. One recent eBay offering of the Metro in original packaging was being sold for $200.00.
Plymouths in 1:20 scale
PMC offered Plymouth Cranbrook and Suburban models from 1949 through 1954. Most of these were done in a larger 1:20 scale of about 9 inches long. The Suburban came with some interesting details including an opening rear tailgate. The 1954 Suburban was offered in a red ambulance version with gold lettering on the sides, while the Cranbrook sedan also appeared in a yellow taxi variation.The Plymouths were not as promotionally sophisticated at PMC's Chevys. Though the models were handsome, original manufacturers' paints were not applied, there were no interiors, and the molding and detail were not as precise. Perhaps the Plymouths represent a natural blend in product ideology between the more toy-like IH offerings and the serious promoting that was to come with Chevrolet.
Practical Chevrolets
In the early 1950s, Chevrolet became PMC's bread and butter client. At this time, PMC turned more serious in the promotional business, as Chevrolet demanded more precision in detail and application of actual company paints on its models - thus the toy-like colors and appearance of the International trucks was abandoned. PMC offered Chevrolet models from 1951 through 1958.The first Chevys offered in 1951 were in regular sedan as well as 'fastback' Fleetline versions. Previous to this, National Products and Banthrico had offered Chevy models (Automotive News 1949). The first Bel Airs were offered in 1953; a 4 door sedan and convertibles in several colors. A more basic smooth sided '53 Chevrolet 150 sedan was also offered (Clarence Young Autohobby). 1954 brought similar offerings. At least on Chevy, the '55 sedan was offered in remote control form.
The 150 sedan shows an interesting trend in promotional offerings when comparing the early 1950s with the early 1960s. The pre-performance, post-war era of practicality in the early '50s gave emphasis to more economical sedans, so it is notable that early promotional model makers commonly molded vehicles in 4-door configurations even in the most basic models available. Four door Bel Airs were offered by PMC all the way up to 1958, one available with police decor. By about 1960, however, most promotional makers only modeled sportier and more powerful 2-door coupes and hardtops, in a new era of a stronger economy, more affluent clientele and the new baby-boomer driver's market.
America's first sports car, the 1954 Corvette, was made by PMC. It was produced with a removable sports hardtop (Timm 2010, PMC literature, page 8). Later Corvettes, up through at least 1958, were also offered. The 1958 Chevy smooth-sided Cameo pickup truck was another PMC model.
Ford heritage - PMC's last promos
Ford wagons were offered from 1955 through 1959. The '55 was offered as a 'Red Cross Ambulance' (Timm 2010, PMC Literature, page 7). PMC's last promotionals were 1959 Fords in a slightly larger scale about 1:20; the Ranchero and Country Sedan wagon (AMT had the two-door hardtops and convertibles). Most of the PMC models were done in two-tone red and white or green and white paint. Models had complete interiors. After 1959, PMC sold these models in a simplified retail form, without interiors and greatly simplified wheels. Some of the retail 1959 PMC Fords were made in 2-tone colors, but most were cast in a solid turquoise or red. The retail models are discussed more below.In the early 1960s, the toy company Korris Kars offered a '59 Ranchero and Country wagon in a less detailed softer and more flexible polyurethane plastic. At first glance it appears to be a reworking of the PMC casting, but it is not. They were done in 1:25 scale, and did not have a metal chassis, rather one entire body casting to which axles were directly attached. As such, they had crude interiors, once again, as part of the whole body casting. The black plastic wheels had stick-on hubcaps.
One can stumble upon a 1959 Ford Custom 300 2 door hardtop made by Promolite Resin Models around 2010 that might fool one into thinking this was a PMC offering. PMC, however, only made Ranchero and Country wagon versions. Promolite Resin Models made its Custom 300 body to fit a PMC chassis - so, voila!, a new old PMC !
Product Details
Most years, PMC packaged its cars and trucks in fairly bright, colorful boxes - often with accurate illustrations of the vehicles adorning their sides. Often boxes would say "A Tru-Miniature" on the sides in large letters - possibly making some believe that was the name of the company. Most PMC models throughout the years did not have interiors, exceptions being convertibles like the 1953 Chevrolets, the Corvettes, and the 1959 Ford Ranchero and Country Sedan station wagon. Of course, early Chevy cars were banks, so a detailed interior was not offered. On the bank models, a coin trap was made in the chassis so money could be removed.Chassis detail varied quite a bit in different models. Though more toy-like in execution, early International pickups had detailed plastic bases with engine, exhaust and suspension details clearly molded. Starting about 1954, though, most bases/chassis were made of metal, which apparently added structural strength for friction motors that started to be popular in many promotionals. For example, the 1955 Bel Air without friction motor had a chassis completely smooth and molded in plastic, while the 1954 Corvette, with "spin-torque motor" (as PMC called it), had a metal base. Though PMC offered no promotionals after 1960, other promotional model makers found the new and harder styrene plastic durable enough to support the motor. Also, plastic bases did not rust over time.
PMC Chevrolet models often came colored with actual GM colors. The name of the color would actually be stamped in white or black depending on the shade of the car (for example, "Woodland Green", "Sungold" or "Campus Cream"). The color would be printed on the center of the roof parallel with side windows (Hover 2010). In the case of the 1953 Bel Air convertible, the name was found on the center of the trunk lid, printed parallel with the bumpers.
Tires were black rubber often with a whitewall. Early PMC wheels on IH trucks were attractive red plastic with a small metal hub. These also appeared on many Chevys. Some of the wheels were simple "moon" type style, while some of the International and Plymouth wheels were a less attractive simple white plastic hub which commonly yellowed and became brittle with time. Usually the wheels were generic and not rendered with accuracy to the real cars, but this was the 1950s. An exception appears to have been the 1959 Ford Ranchero which had realistic renderings of the car's actual hubcaps.
Retail Toys
About 1959, PMC moved a few miles west of Milwaukee to Pewaukee. The 1959 Ford Ranchero and Country Sedan wagon and a 1959 Opel Rekord seem to have been the last promotionals offered by PMC. Since the Opel did not change much for 1960, it was carried over to the next year (Hover 2011). By 1960, however, HubleyHubley Manufacturing Company
The Hubley Manufacturing Company produced a wide range of cast-iron toys, doorstops, and bookends. Toys, particularly motor vehicles, were also produced in zinc alloy and plastic. The company is probably most well known for its detailed 1:25 scale metal kits of 1930s cars. For a time Hubley...
gained contracts for plastic promos of the Ford station wagon, which it carried over through 1962, apparently pushing PMC out of the promotional business.
After 1959, PMC's history gets fuzzy. PMC, or another caster using PMC's dies, later made simplified retail toy versions of earlier models up to as late as about 1965. Available at dime stores like G. C. Murphys, the Ranchero, Beetle, Opel, 1958 Chevrolet Cameo pickup, and probably others, were offered in a more simple style in non-warping styrene (Scale Auto Magazine 2004). They were simplified from the promo versions, with no interiors or windows and wheels were solid black styrene with or without whitewalls. The earlier of these retail versions of the Ranchero were still molded in two-tone colors, but later, solid colors were used (turquoise green or red were two choices). These were offered as either unassembled kits or assembled models, sometimes poly-bagged (Scale Auto Magazine 2004).
It appears 1959 was a pivotal year for promotional model makers, and PMC in particular. Perhaps some of the company's decline had to do with the expense of engineering the new non-warping styrene plastic mixed with the tooling required to make the ever more popular kits that other manufacturers took up. PMC's kits were very simple and not as well known as those of AMT, SMP or Jo-Han. As a company, Jo-Han did well, but was always the lesser of the Big Three (being AMT, MPC
Model Products Corporation
Model Products Corporation or MPC for short, was a plastic model company started in 1963. It produced highly accurate and detailed kits and pre-assembled promotional models, mainly of cars...
and JoHan. Venerable maker SMP was absorbed by AMT, but PMC was several rungs down the promo ladder by 1960 and gradually weakened through the decade.
Another blow to PMC's car production was Hubley's contract for 1960 through 1962 Ford wagons and hardtops, a niche that PMC had in 1959. Adding insult to injury, Ford dropped its full-size Ranchero model and neither did PMC get the contract for the new Falcon-based pickup. Perhaps the company's decision to exit production of promotional and car models was also due to a peripheral headquarters location in Milwaukee – away from close contact with Detroit's design offices.
PMC, after establishing some unique niches for itself with GM and IH over a decade, diminished into retail toy markets for a few years, and then abandoned most car model production. Today known as PM Plastics the company is still headquartered in Pewaukee, Wisconsin and makes plastic trays, containers, exercise steps, ramps, and other products (though a neat pontoon plane is shown on the company website (PM Plastics website). The company president is Bill Ford (son of founder Ed) and family member Gerald Ford is sales manager (Timm 2010 Product Miniature page).