Schofield tank
Encyclopedia
The Schofield tank named after its designer, was a New Zealand
tank design of the Second World War. Developed in 1940 when it seemed that the Pacific War
might reach New Zealand and with little likelihood of weapons coming from Britain
, it did not enter service. It was designed to run on either tracks or wheels.
s arose in 1940, E.J.Schofield, a motor vehicle dealer for General Motors
, in Wellington
, approached the government with his own design.
Schofield tank's was based on the chassis of a Chevrolet
6 hundredweight
truck using the suspension from a Universal Carrier
. Wheels normally carried on the hull could be bolted on so that it could use these rather than the tracks. As initially designed it had a crew of three: machine gunner and driver at the front and a second machine gun in a turret at the rear.
The initial design performed badly in trials but the Government sought an improved version. Designed by another member of the original team, the improved model used a better transmission and the turret now contained a QF 2 pounder gun with a co-axial Besa machine gun
. By the time it was complete - 1942 - New Zealand had received tanks from the UK and US.
The armour plating was provided by the New Zealand Railways
. The four wheels shared drive and idler sprockets with the track, and the move from wheels to track, and vice versa, could be made from within the hull.
In 1943 the improved design prototype was shipped to Britain, where it was evaluated by the Department of Tank Design. Although not completely critical, the project was advised to be stopped. The tank was stored for a while and scrapped post war.
New Zealand
New Zealand is an island country in the south-western Pacific Ocean comprising two main landmasses and numerous smaller islands. The country is situated some east of Australia across the Tasman Sea, and roughly south of the Pacific island nations of New Caledonia, Fiji, and Tonga...
tank design of the Second World War. Developed in 1940 when it seemed that the Pacific War
Pacific War
The Pacific War, also sometimes called the Asia-Pacific War refers broadly to the parts of World War II that took place in the Pacific Ocean, its islands, and in East Asia, then called the Far East...
might reach New Zealand and with little likelihood of weapons coming from Britain
United Kingdom
The United Kingdom of Great Britain and Northern IrelandIn the United Kingdom and Dependencies, other languages have been officially recognised as legitimate autochthonous languages under the European Charter for Regional or Minority Languages...
, it did not enter service. It was designed to run on either tracks or wheels.
Design and development
When a need for the production of indigenous armoured fighting vehicleArmoured fighting vehicle
An armoured fighting vehicle is a combat vehicle, protected by strong armour and armed with weapons. AFVs can be wheeled or tracked....
s arose in 1940, E.J.Schofield, a motor vehicle dealer for General Motors
General Motors
General Motors Company , commonly known as GM, formerly incorporated as General Motors Corporation, is an American multinational automotive corporation headquartered in Detroit, Michigan and the world's second-largest automaker in 2010...
, in Wellington
Wellington
Wellington is the capital city and third most populous urban area of New Zealand, although it is likely to have surpassed Christchurch due to the exodus following the Canterbury Earthquake. It is at the southwestern tip of the North Island, between Cook Strait and the Rimutaka Range...
, approached the government with his own design.
Schofield tank's was based on the chassis of a Chevrolet
Chevrolet
Chevrolet , also known as Chevy , is a brand of vehicle produced by General Motors Company . Founded by Louis Chevrolet and ousted GM founder William C. Durant on November 3, 1911, General Motors acquired Chevrolet in 1918...
6 hundredweight
Hundredweight
The hundredweight or centum weight is a unit of mass defined in terms of the pound . The definition used in Britain differs from that used in North America. The two are distinguished by the terms long hundredweight and short hundredweight:* The long hundredweight is defined as 112 lb, which...
truck using the suspension from a Universal Carrier
Universal Carrier
The Universal Carrier, also known as the Bren Gun Carrier is a common name describing a family of light armoured tracked vehicles built by Vickers-Armstrong. Produced between 1934 and 1960, the vehicle was used widely by British Commonwealth forces during the Second World War...
. Wheels normally carried on the hull could be bolted on so that it could use these rather than the tracks. As initially designed it had a crew of three: machine gunner and driver at the front and a second machine gun in a turret at the rear.
The initial design performed badly in trials but the Government sought an improved version. Designed by another member of the original team, the improved model used a better transmission and the turret now contained a QF 2 pounder gun with a co-axial Besa machine gun
Besa machine gun
The Besa Machine Gun was a British version of the Czechoslovak ZB-53 air-cooled, belt-fed machine-gun, which in the Czechoslovak army was marked as the TK vz. 37...
. By the time it was complete - 1942 - New Zealand had received tanks from the UK and US.
The armour plating was provided by the New Zealand Railways
New Zealand Railways Department
The New Zealand Railways Department, NZR or NZGR and often known as the "Railways", was a government department charged with owning and maintaining New Zealand's railway infrastructure and operating the railway system. The Department was created in 1880 and was reformed in 1981 into the New...
. The four wheels shared drive and idler sprockets with the track, and the move from wheels to track, and vice versa, could be made from within the hull.
In 1943 the improved design prototype was shipped to Britain, where it was evaluated by the Department of Tank Design. Although not completely critical, the project was advised to be stopped. The tank was stored for a while and scrapped post war.
See also
- Sentinel tankSentinel tankThe Sentinel tank was a cruiser tank designed in Australia in World War II in response to the war in Europe, and to the threat of Japan expanding the war to the Pacific or even a feared Japanese invasion of Australia. It was the first tank to be built with a hull cast as a single piece, and the...
- Australian indigenous tank design - Bob Semple tankBob Semple tankThe Bob Semple tank was a tank designed by New Zealand Minister of Works Bob Semple during World War II. Originating out of the need to build military hardware from available materials, the tank was built from corrugated iron on a tractor base...
- another NZ design