Springfield Model 1884
Encyclopedia
The Springfield Model 1884 was one of the "Trapdoor Springfield" rifles.
The Model 1884 traces its roots back to the design of the Springfield Model 1873
. Oddly, most of the changes that identify the Model 1884 as a distinct model occurred either before or after 1884. The Model 1884 incorporated a significant number of improvements that had been made between 1878 and 1879. It also featured a serrated trigger that had been incorporated into the Springfield rifle design in 1883.
The most dramatic change to the rifle design, which is often considered to be the identifying feature of the model 1884, was a new rear sight which had been designed by Lieutenant Colonel R. A. Buffington of the U.S. Army Ordnance Department. This sight however was not perfected until 1885.
The principle feature of this new sight was a rack and pinion style windage adjustment. Unlike previous sights, the base was not used for any position other than point blank. The raised leaf had graduations from 200 to 1400 yards. A new barrel band was also designed to accommodate this new sight so that it could lay flat in the point black position.
Marksmen generally favored the new sight, but general troops were less enthusiastic about it and often considered it to be an annoyance.
The Model 1884 was also produced in a carbine version. It was found that the rear sight could be easily damaged when removing the rifle from the carbine boot. The rear barrel band was therefore modified in 1890 to include a rear sight protector.
A round rod bayonet model was also produced. This, like the Springfield Model 1880
, was an attempt to combine the ramrod (aka cleaning rod) and bayonet into a single unit. The Model 1884 version included an improved retaining mechanism, as the Model 1880's retaining mechanism had proved to be problematic.
The Model 1884 traces its roots back to the design of the Springfield Model 1873
Springfield Model 1873
The Model 1873 "Trapdoor" Springfield was the first standard-issued breech-loading rifle adopted by the United States Army...
. Oddly, most of the changes that identify the Model 1884 as a distinct model occurred either before or after 1884. The Model 1884 incorporated a significant number of improvements that had been made between 1878 and 1879. It also featured a serrated trigger that had been incorporated into the Springfield rifle design in 1883.
The most dramatic change to the rifle design, which is often considered to be the identifying feature of the model 1884, was a new rear sight which had been designed by Lieutenant Colonel R. A. Buffington of the U.S. Army Ordnance Department. This sight however was not perfected until 1885.
The principle feature of this new sight was a rack and pinion style windage adjustment. Unlike previous sights, the base was not used for any position other than point blank. The raised leaf had graduations from 200 to 1400 yards. A new barrel band was also designed to accommodate this new sight so that it could lay flat in the point black position.
Marksmen generally favored the new sight, but general troops were less enthusiastic about it and often considered it to be an annoyance.
The Model 1884 was also produced in a carbine version. It was found that the rear sight could be easily damaged when removing the rifle from the carbine boot. The rear barrel band was therefore modified in 1890 to include a rear sight protector.
A round rod bayonet model was also produced. This, like the Springfield Model 1880
Springfield Model 1880
The Springfield Model 1880 was a trapdoor rifle based on the design of the Springfield Model 1873.In the years following the U.S. Civil War, Springfield Armory had produced bayonets by re-working older bayonets left over from the war. By 1880, their supply of bayonets had been almost completely...
, was an attempt to combine the ramrod (aka cleaning rod) and bayonet into a single unit. The Model 1884 version included an improved retaining mechanism, as the Model 1880's retaining mechanism had proved to be problematic.