Swing Rifles
Encyclopedia
The Swing rifle was a design developed by a number of target shooting enthusiasts who came together in 1971 at Bisley
. The design's primary instigators were George Swenson and Laurie Ingram. At the time target rifle competition in the UK was dominated by designs based on military actions such as those of the Lee Enfield and Mauser 1898. These designs were felt to have reached the limits of their develpment potential; especially when combined with commercially manufactured or hand-loaded ammunition.
Swenson and Ingram's aim was to develop a design that incorporated the best in target rifle design but maintained adherence to the requirements of the National Rifle Association of the United Kingdom
that rifles should be of a ‘conventional design and safe’ and be within certain size and weight constraints. Swenson had been employed by the London gunmaker John Wilkes of Beak Street and whilst with them had commissioned the manufacture of a 'Universal' target sight and a copy of the Finnish Mantari match trigger. He was also the UK importer of Schultz & Larsen
cut-rifled barrels. All of these products were later to appear in the Swing products.
Swenson stated that his primary aim was to ‘concentrate on the importance of the trigger’. This combined with a firing action that was measured at less that 1.7 milliseconds was a significant feature in its early success.
In 1972, having successfully developed a prototype (manufactured by Churwick Engineering who had worked for Swenson while at Wilkes) Swenson and Ingram created Swing Firearms Ltd which marketed model SIN 71 Mk1 rifle. It is suggested that the name of the rifle derived from an un-willingness on behalf of the NRA of the UK to accept the design as valid on its first outing at Bisley. Notwithstanding the type was subsequently named as the SWING (for SWenson and INGram).
The basic design was:
A single shot, bolt action, target rifle in 7.62 x 51 mm calibre.
A bolt having four locking lugs derived from the Schultz & Larsen
Model 54J of 1953 and 62M of 1961. The lugs were moved to the front of the bolt (as opposed to the Schultz & Larsen design) but were of the same ‘generous’ size. The position of the lugs, at 45 degrees when closed, was suggested to be a compromise between the compensation characteristics of the Mauser and Lee Enfield types of action with the former locking vertically and the latter horizontally.
The Mantaari type trigger. The design came from Scandinavia where it had been designed as a match replacement for the Swedish Mauser 95 rifle.
The case recess in the bolt head was deep at 3mm (.118”) as compared with the standard 2,5mm (.100) set originally by Mauser. This depth was necessitated by the form of the radial sliding extractor. A spring-loaded ejector was fitted.
A bolt stop operating in a slot milled in the bolt body tube.
Further marks were developed as follows:
Following the death of George Swenson a William Floyd inherited some parts and the rights to the Swing rifle. During this period the final Swing rifles were produced engraved with Swenson's signature and these have become collectable items.
The Swing rifle is no longer in production but its design features have been continued in types such as the RPA and Paramount rifles
Bisley
-Places:* Two villages in the United Kingdom:**Bisley, Surrey**Bisley, Gloucestershire*Bisley Ranges is near the Surrey village and is the headquarters of the National Rifle Association, UK -Others:...
. The design's primary instigators were George Swenson and Laurie Ingram. At the time target rifle competition in the UK was dominated by designs based on military actions such as those of the Lee Enfield and Mauser 1898. These designs were felt to have reached the limits of their develpment potential; especially when combined with commercially manufactured or hand-loaded ammunition.
Swenson and Ingram's aim was to develop a design that incorporated the best in target rifle design but maintained adherence to the requirements of the National Rifle Association of the United Kingdom
National Rifle Association of the United Kingdom
The National Rifle Association of the United Kingdom is the governing body of full bore rifle and pistol shooting sports in the United Kingdom.- History :...
that rifles should be of a ‘conventional design and safe’ and be within certain size and weight constraints. Swenson had been employed by the London gunmaker John Wilkes of Beak Street and whilst with them had commissioned the manufacture of a 'Universal' target sight and a copy of the Finnish Mantari match trigger. He was also the UK importer of Schultz & Larsen
Schultz & Larsen
Schultz & Larsen is a Danish rifle and silencer manufacturer that originally was located in the city of Otterup, but as of 1994 have been located in the city of Rask Mølle on the island of Fyn....
cut-rifled barrels. All of these products were later to appear in the Swing products.
Swenson stated that his primary aim was to ‘concentrate on the importance of the trigger’. This combined with a firing action that was measured at less that 1.7 milliseconds was a significant feature in its early success.
In 1972, having successfully developed a prototype (manufactured by Churwick Engineering who had worked for Swenson while at Wilkes) Swenson and Ingram created Swing Firearms Ltd which marketed model SIN 71 Mk1 rifle. It is suggested that the name of the rifle derived from an un-willingness on behalf of the NRA of the UK to accept the design as valid on its first outing at Bisley. Notwithstanding the type was subsequently named as the SWING (for SWenson and INGram).
The basic design was:
A single shot, bolt action, target rifle in 7.62 x 51 mm calibre.
A bolt having four locking lugs derived from the Schultz & Larsen
Schultz & Larsen
Schultz & Larsen is a Danish rifle and silencer manufacturer that originally was located in the city of Otterup, but as of 1994 have been located in the city of Rask Mølle on the island of Fyn....
Model 54J of 1953 and 62M of 1961. The lugs were moved to the front of the bolt (as opposed to the Schultz & Larsen design) but were of the same ‘generous’ size. The position of the lugs, at 45 degrees when closed, was suggested to be a compromise between the compensation characteristics of the Mauser and Lee Enfield types of action with the former locking vertically and the latter horizontally.
The Mantaari type trigger. The design came from Scandinavia where it had been designed as a match replacement for the Swedish Mauser 95 rifle.
The case recess in the bolt head was deep at 3mm (.118”) as compared with the standard 2,5mm (.100) set originally by Mauser. This depth was necessitated by the form of the radial sliding extractor. A spring-loaded ejector was fitted.
A bolt stop operating in a slot milled in the bolt body tube.
Further marks were developed as follows:
Mark 3
- Investment cast body, with integrated recoil lugs;
- Bolt lugs guided full travel length by corresponding slot rails in the body;
- Bolt lug diameter increased to improve guidance in body rails;
- One piece bolt.
Mark 4
Various body improvements; primarily internal, including:- The barrel threads a more conventional UN ,1040 x 16tpi;
- Longer barrel shank;
- Bedding Screws are now ¼ x 28 UNF.
- Bolt lug diameter increased;
- The opening movement of the bolt lightened by reducing the firing pin travel thus reducing the cocking cam angle.
- New bolt stop,
- A light metal firing pin, with a redesigned hard tip to reduce the risk of bending and breakage.
- Improvements to the extractor mechanism.
Mark 5
A Mark 5 model exists but it is believed that this is just a number change.Following the death of George Swenson a William Floyd inherited some parts and the rights to the Swing rifle. During this period the final Swing rifles were produced engraved with Swenson's signature and these have become collectable items.
The Swing rifle is no longer in production but its design features have been continued in types such as the RPA and Paramount rifles