Top-bar hive
Encyclopedia
Beehive (beekeeping)
A beehive is an enclosed structure in which some honey bee species of the subgenus Apis live and raise their young. Natural beehives are naturally occurring structures occupied by honeybee colonies, while domesticated honeybees live in man-made beehives, often in an apiary. These man-made...
used for beekeeping
Beekeeping
Beekeeping is the maintenance of honey bee colonies, commonly in hives, by humans. A beekeeper keeps bees in order to collect honey and other products of the hive , to pollinate crops, or to produce bees for sale to other beekeepers...
. They are especially useful in areas where resources are limited, but are also increasingly popular among hobby beekeepers in industrialized nations. This article is primarily concerned with the application of these hives in non-traditional settings, such as prosperous countries as they offer particular advantages to beginning hobby beekeepers.
Design Characteristics
A top-bar hive has bars from which the honey beeHoney bee
Honey bees are a subset of bees in the genus Apis, primarily distinguished by the production and storage of honey and the construction of perennial, colonial nests out of wax. Honey bees are the only extant members of the tribe Apini, all in the genus Apis...
s attach and hang wax
Beeswax
Beeswax is a natural wax produced in the bee hive of honey bees of the genus Apis. It is mainly esters of fatty acids and various long chain alcohols...
comb
Honeycomb
A honeycomb is a mass of hexagonal waxcells built by honey bees in their nests to contain their larvae and stores of honey and pollen.Beekeepers may remove the entire honeycomb to harvest honey...
, an array of hexagonal (six sided) cells. Unlike the full four-sided frames used in a Langstroth hive
Langstroth hive
The Langstroth bee hive, patented in October 1852, is the standard beehive used in many parts of the world for beekeeping. The advantage of this hive is that the bees build honeycomb into frames, which can be moved with ease. The frames are designed to prevent bees from attaching honeycombs where...
, the comb on bars cannot be centrifuged to extract honey and then reused. This characteristic might lead to a lower production of honey, but the honey from clear yellow comb
Honeycomb
A honeycomb is a mass of hexagonal waxcells built by honey bees in their nests to contain their larvae and stores of honey and pollen.Beekeepers may remove the entire honeycomb to harvest honey...
(comb that has not been used for brood) is of the highest quality and can be used as in-comb honey product, highly prized by some users in preference to liquid honey. This may be spread on hot toast, melting the wax, or may be chewed as a treat, releasing the honey.
Top Bars
A beekeeper can make top bars from any plain wood. The top bars are usually 1¼ inches to 1⅜ inches (32–35 mm) wide, depending on local conditions and the type of bee to be housed. Combs can be handled individually. The depth of the bar and the length of the bar can be whatever the beekeeper wants, but usually between 17" and 20". The hive body can be a long box, covered by a series of top bars laid side by side like a wooden keys of a marimba. The depth of the top bar hive should be 12" or less. If deeper, the weight of the comb filled with honey tends to cause it to fall off the bar into the bottom of the hive. The bees will lose access to this during the winter cluster in the hanging combs, thus increasing their likelihood of starving.
It is important to give the bees a clear starting point to build comb on each top bar. Some TBH beekeepers fashion their top bars with a V-shaped bottom to guide the comb building. Alternatively, some use a table saw to cut two closely spaced slots along the long axis of each new top bar. Either type of guide, wax line or grooves, gives bees a place to hold on to with their hooked feet. This allows a substantial "drape" of bees to form, which is always the beginning of comb building.
Entrance
Unlike the conventional Langstroth hives, the entrance is not part of the hive's ventilation system. This allows a great deal of flexibility in both placement and configuration.
The provision of a single entrance with a landing platform at one end will help in restricting the placement of pollen stores. Combs with pollen will tend to be in the first two combs nearest the entrance. A single entrance is also more defensible and enables the bees to combat robbing by bees from other colonies. This entrance should be protected by some sort of canopy (or an extension of the roof) to reduce or eliminate the formation of dew on the landing platform — large drops of water will tend to trap early leaving bees until the water evaporates.
The entrance should not be placed high on the hive as this will allow the escape of winter heat. Rather than place the entrance in the end wall it should be located in one of the sides of the hive, especially in the Tanzanian (straight sided) hive. This will allow the bees to access the side which they must use to access comb in the back of the hive for storing nectar.
One very effective entrance configuration is to provide a landing pad, which is an extension of a covered porch for the guard bees. All bees are prevented from flying directly into the hive by making the entrance a number of 5/16 inch (8 mm) holes in the hive end wall. Thus any bee entering the hive must land on the pad, cross the sheltered porch and walk through one of the several entrance holes. The guard bees on the sheltered porch may here inspect and communicate with the arrivals and so reject any raiders, which are recognized by not carrying food and by carrying scents from a foreign hive.
History
Top-bar hives have a long history as the concept is believed to be several thousand years old. The earliest hives are believed to be baskets with sticks lain across the top as bars. Most modern top-bar hives are found in AfricaAfrica
Africa is the world's second largest and second most populous continent, after Asia. At about 30.2 million km² including adjacent islands, it covers 6% of the Earth's total surface area and 20.4% of the total land area...
. Owing to the low cost and ease of construction these are especially appropriate for use in non-industrialized and impoverished locations.
The two basic forms of top-bar hives (named after their countries of origin) are the Kenya
Kenya
Kenya , officially known as the Republic of Kenya, is a country in East Africa that lies on the equator, with the Indian Ocean to its south-east...
n (KTBH, with sloped sides ) and the Tanzania
Tanzania
The United Republic of Tanzania is a country in East Africa bordered by Kenya and Uganda to the north, Rwanda, Burundi, and the Democratic Republic of the Congo to the west, and Zambia, Malawi, and Mozambique to the south. The country's eastern borders lie on the Indian Ocean.Tanzania is a state...
n ("Tanz", with vertical sides ). The Tanzanian is easier to construct, while it is suggested that bees in a Kenyan hive will have much less tendency to adhere comb to the sides of the hive. Once adhered comb is freed from the side (leaving a beespace) the bees tend to not rejoin the comb, so this is not a significant problem for either hive. It is important in either type that end access or some free space without comb is available so adhered comb may be freed.
A purpose built hive may be designed for better ventilation and pest control. Usually protection against ants, hive beetles, and other predators (such as honey badgers in Africa or skunk
Skunk
Skunks are mammals best known for their ability to secrete a liquid with a strong, foul odor. General appearance varies from species to species, from black-and-white to brown or cream colored. Skunks belong to the family Mephitidae and to the order Carnivora...
s or bear
Bear
Bears are mammals of the family Ursidae. Bears are classified as caniforms, or doglike carnivorans, with the pinnipeds being their closest living relatives. Although there are only eight living species of bear, they are widespread, appearing in a wide variety of habitats throughout the Northern...
s in North America
North America
North America is a continent wholly within the Northern Hemisphere and almost wholly within the Western Hemisphere. It is also considered a northern subcontinent of the Americas...
) must be provided. An open, screened bottom providing both ventilation and varroa mite ejection appears more hygienic than a closed bottom. With all hives a dry, sunny location for wintering combined with good ventilation appears to reduce the incidence of nosema while regular culling of dark comb after two year's use appears to eliminate American foul brood. The culling of old comb is easier in the top-bar hive as a part of the managed progression of bar use.
Geographical distribution
Traditional top bar hives are appropriate to locations with tropical or temperate climates. Owing to the elongated horizontal configuration of the hive they are not generally believed to be appropriate for latitudeLatitude
In geography, the latitude of a location on the Earth is the angular distance of that location south or north of the Equator. The latitude is an angle, and is usually measured in degrees . The equator has a latitude of 0°, the North pole has a latitude of 90° north , and the South pole has a...
s with severe winters.
Some beekeepers are experimenting with short versions of top bar hives which have ~1 cm notches cut in the center edge of the bars so that they can 'super' them (put another hive body above an existing hive body to stimulate bees to produce honey in it) with another short top bar hive, or even a standard Langstroth hive body. This method reportedly works well. These sorts of top bar hives could be insulated easily, as is done with Langstroth hives, for colder climates.
Another variant that may improve over-wintering in cold climates is a design pioneered by Phil Chandler in the UK, which has a central side entrance and two follower boards, between which the colony is confined. This leaves large, stationary air-filled spaces either side of the colony, which can be filled with insulation in winter.
Simplicity and generality of construction
The simplicity of the top-bar hive allows use of salvage materials and even boxes and containers such as half-drums, drawers and packing crates. Almost any container may be used as a hive, provided appropriate bars are placed across the top and a weather tight cover and a single defensible entrance are provided. While this is an advantage in impoverished areas, purpose-built hives offer certain advantages in pest control, durability, and defensibility. While hives in a beeyard should use identical bars for convenience in management, the construction does not require the precise dimensional control of the Langstroth type.Ease of inspection
Unlike the LangstrothLangstroth hive
The Langstroth bee hive, patented in October 1852, is the standard beehive used in many parts of the world for beekeeping. The advantage of this hive is that the bees build honeycomb into frames, which can be moved with ease. The frames are designed to prevent bees from attaching honeycombs where...
stacked box hive, there is no heavy lifting involved (unless the entire hive is to be relocated). Inspection of the combs can be carried out with far less disturbance to the bees than is the case with Langstroth hives, since only a small amount of the hive is exposed at any one time. Many modern hive designs incorporate a viewing glass window in the side of the hive with a removable wooden cover allowing for complete inspection without disturbance of the hive. This promotes more frequent inspection by the beginner as the bees are less prone to become defensive.
The recent introduction of sliding 'follower boards' to enclose the colony within the hive body has enabled more flexible management of top bar hives and facilitated quicker inspections with minimal disturbance to the bees.
Reduced storage requirements
Since no seasonal storage of honey collection boxes ("supers") is needed, nor is a centrifugal extractorCentrifuge
A centrifuge is a piece of equipment, generally driven by an electric motor , that puts an object in rotation around a fixed axis, applying a force perpendicular to the axis...
used, the storage requirements are also greatly reduced. Hobby beekeepers using specifically designed top-bar hives have been able to successfully keep bees without any medications, important since the medications are dangerous to humans and their time of use must be carefully managed to minimise contamination of hive products.
No queen excluder required
It is not necessary to exclude the queen from the honey stores as some think is necessary using the LangstrothLangstroth hive
The Langstroth bee hive, patented in October 1852, is the standard beehive used in many parts of the world for beekeeping. The advantage of this hive is that the bees build honeycomb into frames, which can be moved with ease. The frames are designed to prevent bees from attaching honeycombs where...
stacked box hive. Keeping a full bar of honey next to the brood
Brood (honeybee)
In entomology, the term brood is used to refer to the embryo or egg, the larva and the pupa stages in the life of holometabolous insects. The brood of honey bees develops within a bee hive. In man-made, removable frame hives, such as Langstroth hives, each frame which is mainly brood is called a...
plus appropriate introduction of bare bars adjoining the brood in early spring will keep the brood localized. Queen excluders and supers both tend to slow the ability of bees to quickly deposit nectar and resume foraging.
Hive management
It is recommended that new or recycled empty bars be placed at each side of the brood chamber just before spring build–up as it is easier for the bees to make new comb than to move honey stores to make room for new brood. This will also ensure the maintenance of a well built honey barrier between the brood and higher grade stores. To prevent the build up of old comb in the brood chamber it may be advantageous to add new bars only on the entrance side of the brood chamber just past the pollen stores. This will cause a collection of older honey in re-used comb, which may be removed and used to produce a somewhat lesser quality of honey, as it will have additional flavors from the propolis used to strengthen and protect the brood comb. Such honey may be especially appropriate for making meadMead
Mead , also called honey wine, is an alcoholic beverage that is produced by fermenting a solution of honey and water. It may also be produced by fermenting a solution of water and honey with grain mash, which is strained immediately after fermentation...
and root beer
Root beer
Root beer is a carbonated, sweetened beverage, originally made using the root of a sassafras plant as the primary flavor. Root beer, popularized in North America, comes in two forms: alcoholic and soft drink. The historical root beer was analogous to small beer in that the process provided a drink...
, as additional flavors will predominate. The progressive removal of brood comb appears, as noted above, consistent with control of AFB
American foulbrood
American foulbrood , caused by the spore- forming Paenibacillus larvae ssp. larvae , is the most widespread and destructive of the bee brood diseases. Paenibacillus larvae is a rod-shaped bacterium, which is visible only under a high power microscope...
.
Harvesting honey
Raw (uncooked) honey is extracted by removing several adjacent bars (typically 3) containing honey filled comb. It is best if this comb is well filled and capped. Not only is this a properly dried honey, the taking of any empty comb is a waste of time and resources since it will have to be replaced but does not yield any honey. The several bars removed are replaced with a single empty bar. Addition of at least one bar is required as the shape of the newly adjacent combs no longer match properly, a single bar ensures proper comb alignment, with additional bars added as comb is developed. If both new yellow wax and dark reused brood comb are present these should be segregated to prepare two grades of honey. If any pollen cells are present these should be excised if a clear honey is desired. This pollen may then be mashed into a small amount of honey and put aside for anti-allergenic therapy. The removed bars are then crushed in a screen and the honey drained into a pot or bucket. Additional honey (of lower grade) may then be extracted from the wax by careful heating, done most safely in a double boilerBain-marie
A bain-marie is a French term for a piece of equipment used in science, industry, and cooking to heat materials gently and gradually to fixed temperatures, or to keep materials warm over a period of time.- Description :...
or by placing the pot in the sun under a clear cover. Honey and honey-pollen or in-comb honey mix should be conditioned for a day or so before use. This will allow the anti-bacterial effects of the honey to be effective. Note that comb honey
Comb honey
Comb honey is honey, intended for consumption, which still contains pieces of the hexagonal-shaped beeswax cells of the honeycomb.Before the invention of the honey extractor almost all honey produced was in the form of comb honey...
should not be presented dry, but should be covered in liquid honey. This is because although the honey is anti-bacterial, dry comb is not so sanitary. Comb honey is commonly sold in European countries in plastic tray containers with clear lids, without being covered in liquid honey.
Raw honey
Honey
Honey is a sweet food made by bees using nectar from flowers. The variety produced by honey bees is the one most commonly referred to and is the type of honey collected by beekeepers and consumed by humans...
will have a much more complex flavor than the usual centrifugated commercial honey found in supermarkets. It will also have distinct flavors by season and location. Many people believe that raw honey from a local producer or a mixture of honey and pollen from a backyard hive will help to reduce pollen allergies
Allergy
An Allergy is a hypersensitivity disorder of the immune system. Allergic reactions occur when a person's immune system reacts to normally harmless substances in the environment. A substance that causes a reaction is called an allergen. These reactions are acquired, predictable, and rapid...
.