Tube tester
Encyclopedia
A tube tester is an electronic instrument designed to test certain characteristics of vacuum tubes. Tube testers evolved along with the vacuum tube to satisfy the demands of the time, and this evolution faded with the tube era, yet with the High-End advent, they became a pricey piece of equipment.
The first tube testers were simple units designed for specific tubes to be used in the battle fields of World War I by radio operators, so they could easily test the tubes of their communication equipment.
, the current which the cathode is capable of emitting, for the given plate voltage, which can usually be controlled by a variable load resistor.
Older testers may call themselves Plate Conductance if the ammeter is in series with the plate, or Cathode Conductance if the meter is in series with the cathode.
The problems of emission testers are:
The advantage of an Emission Tester is, from all types of tube testers available, it gives the most reliable warning for tube wear out. If Emission is at 70%, transconductance can be at 90% still, and gain at 100%. Best and most popular Version is the Funke W19.
of the tube, indicated in micromhos.
, could be displayed on an oscilloscope
screen by use of a plug-in adaptor, or on a dedicated curve tracer. An example is the Tektronix 570; this instrument is rare but still sought after, and sells for thousands of US dollars.
The first tube testers were simple units designed for specific tubes to be used in the battle fields of World War I by radio operators, so they could easily test the tubes of their communication equipment.
Filament continuity tester
The simplest one is the filament continuity tester, usually with a neon lamp connected in series with the filament and a current limiting resistance fed directly by the mains.Tube checker
The simplest of all tube testers. Tubes are used as low power rectifier, at a fraction of it's normal emission. By mistake referred to as Emission Tester sometimes.Emission tester
Next in complexities is the emission tester, which basically treats any tube as a diode by carefully connecting the cathode to ground, all the grids and plate to B+ voltage, feeding the filament with the correct voltage, and an ammeter in series with either the plate or the cathode. This effectively measures emissionThermionic emission
Thermionic emission is the heat-induced flow of charge carriers from a surface or over a potential-energy barrier. This occurs because the thermal energy given to the carrier overcomes the binding potential, also known as work function of the metal. The charge carriers can be electrons or ions, and...
, the current which the cathode is capable of emitting, for the given plate voltage, which can usually be controlled by a variable load resistor.
Older testers may call themselves Plate Conductance if the ammeter is in series with the plate, or Cathode Conductance if the meter is in series with the cathode.
The problems of emission testers are:
- they do not measure key characteristics of tubes, like transconductance
- they do not perform the tests at real load, voltages and currents
- they test the tube under static conditions, which are not even near the dynamic conditions the tube would work with in a real electronic device
- tubes with grids, might not even show the real emission because of hot spots in the cathode, hidden by the grids under normal conditions
The advantage of an Emission Tester is, from all types of tube testers available, it gives the most reliable warning for tube wear out. If Emission is at 70%, transconductance can be at 90% still, and gain at 100%. Best and most popular Version is the Funke W19.
Short circuit test
Usually, emission testers and better testers have a short circuit test which is just a variation of the continuity tester with a neon lamp, and which allows to identify if there is any shortcut between the different electrodes.Parametrical tester, DC Type
This tester Applies DC voltage to the Tube under Test, and datasheet values are verified under real conditions. Good examples are Funke W20 and Neuberger RPG375.Parametrical tester, AC Type
This tester Applies AC voltage to the Tube under Test, and datasheet values are verified under conditions which simulate DC operation. Most popular are the AVO testers.Mutual conductance tester
The mutual conductance tester tests the tube dynamically by applying bias and an AC voltage to the control grid, and measuring the current obtained on the plate, while maintaining the correct DC voltages on the plate and screen grid. This setup measures the transconductanceTransconductance
Transconductance, also known as mutual conductance, is a property of certain electronic components. Conductance is the reciprocal of resistance; transconductance, meanwhile, is the ratio of the current change at the output port to the voltage change at the input port. It is written as gm...
of the tube, indicated in micromhos.
Dynamic conductance tester
The dynamic conductance tester is just a variation of the emission tester with its implications, where a proportional AC voltage is applied to each electrode. This tester exists thanks to Jackson mainly to avoid infringing the patents of the mutual conductance tester held by Hickok, but obviously do not provide the same measurements.Oscilloscope tube curve tracer plug-in
A full set of characteristic curves for vacuum tubes, and later for semiconductor devicesSemiconductor curve tracer
A semiconductor curve tracer is a specialised piece of electronic test equipment used to analyse the characteristics of discrete semiconductor devices such as diodes, transistors, and thyristors...
, could be displayed on an oscilloscope
Oscilloscope
An oscilloscope is a type of electronic test instrument that allows observation of constantly varying signal voltages, usually as a two-dimensional graph of one or more electrical potential differences using the vertical or 'Y' axis, plotted as a function of time,...
screen by use of a plug-in adaptor, or on a dedicated curve tracer. An example is the Tektronix 570; this instrument is rare but still sought after, and sells for thousands of US dollars.
External links
- http://tone-lizard.com/Tube_Testers.html The idiot's guide to tube testers