Unicode compatibility characters
Encyclopedia
In discussing Unicode
and the UCS
, many often refer to compatibility characters. Compatibility characters are graphical characters that are discouraged by the Unicode Consortium. As the Unicode consortium says:
However, the definition is more complicated than the glossary reveals. One of the properties given to characters by the Unicode consortium is the characters' decomposition or compatibility decomposition. Most characters have no value for this property, but over five thousand characters do have a compatibility decomposition mapping that compatibility character to one or more other characters. By setting a character's decomposition property, Unicode establishes that character as a compatibility character. The reasons for these compatibility designations are varied and are discussed in further detail below. The term decomposition can sometimes confuse because a character's decomposition can, in some cases, be a singleton. In these cases the decomposition of one character is simply another equivalent or approximately equivalent character.
Because these semantically distinct characters may be displayed with glyphs similar to the glyphs of other characters, text processing software should try to address possible confusion for the sake of end users. When comparing and collating (sorting) text strings, different forms and rich text variants of characters should not alter the text processing results. For example, software users may be confused when performing a find on a page for a capital Latin letter ‘I’ and their software application fails to find the visually similar Roman numeral ‘Ⅰ’.
The UCS, Unicode character properties and the Unicode algorithms provide software implementations with everything needed to properly display these characters from their decomposition equivalents. Therefore these decomposable compatibility characters become redundant and unnecessary. Their existence in the character set requires extra text processing to ensure text is properly compared and collated (see Unicode normalization). Moreover, these compatibility characters provide no additional or distinct semantics. Nor do these characters provide any visually distinct rendering provided the text layout and fonts are Unicode conforming. Also, none of these characters are required for roundtrip convertibility to other character sets, since the transliteration can easily map decomposed characters to precomposed counterparts in another character set. Similarly, contextual forms, such as a final Arabic letter can be mapped based on its position within a word to the appropriate legacy character set form character.
In order to dispense with these compatibility characters, text software must conform to several Unicode protocols. The software must be able to:
All together these compatibility characters included for incomplete Unicode implementations total 3,779 of the 5,402 designated compatibility characters. These include all of the compatibility characters marked with the keywords <initial>, <medial>, <final>, <isolated>, <fraction>, <wide>, <narrow>, <small>, <vertical>, <square>. Also it includes nearly all of the canonical and most of the <compat> keyword compatibility characters (the exceptions include those <compat> keyword characters for enclosed alphanumerics, enclosed ideographs and those discussed in the following sections: subsequent section).
For comparing, collating, handling and storing plain text, rich text variants are semantically redundant. For example, using a superscript character for the numeral 4 is likely indistinguishable from using the standard character for a numeral 4 and then using rich text protocols to make it superscript. Such alternate rich text characters therefore create ambiguity because they appear visually the same as their plain text counterpart characters with rich text formatting applied. These rich text compatibility characters include:
For all of these rich text compatibility characters the display of glyphs is typically distinct from their compatibility decomposition (related) characters. However, these are considered compatibility characters and discouraged for use by the Unicode consortium because they are not plain text characters, which is what Unicode seeks to support with its UCS and associated protocols. Rich text should be handled through non-Unicode protocols such as HTML, CSS, RTF and other such protocols.
The rich text compatibility characters comprise 1,451 of the 5,402 compatibility characters. These include all of the compatibility characters marked with keywords <circle> and <font> (except three listed in the semantically distinct below); 11 spaces variants from the <compat> and canonical characters; and some of the keyword <superscript> and <subscript> from the "Superscripts and Subscripts" block.
While these compatibility characters are distinguished from their compatibility decomposition characters only by adding the word “symbol” to their name, they do represent long-standing distinct meanings in written mathematics. However, for all practical purposes they share the same semantics as their compatibility equivalent Greek or Hebrew letter. These may be considered border-line semantically distinguishable characters so they are not included in the total.
Though not the intention of Unicode to encode such measuring units the repertoire includes six (6) such symbols that should not be used by authors: the character’s decomposition should be used instead.
Unicode also designates twenty-two (22) other letter-like symbols as compatibility characters.
In addition, several scripts use glyph position such as superscripts and subscripts to differentiate semantics. In these cases subscripts and superscripts are not merely rich text, but constitute a distinct character — similar to a hybrid between a diacritic and a letter — in the writing system (130 total).
Finally, Unicode designates Roman numerals as compatibility equivalence to the Latin letters that share the same glyphs. Here the Unicode Standard make the same mistake in confusing glyph and character that it so often seeks to prevent. Certainly there's a need to deal with the visual ambiguity these characters may suffer when sharing the same glyphs, however a sign-value
numeral for one is certainly a semantically distinct character from a Latin capital or small letter ‘i’. A similar visual ambiguity exists between such characters as the Latin capital letter A ( U+0041) and the Greek capital letter Alpha (Α U+0391), yet Unicode does not unify those characters.
Roman numeral One Thousand actually has a third character representing a third form or glyph for the same semantic unit: One Thousand C D (ↀ U+2180). From this glyph, one can see where the practice of using a Latin M may have arisen. Strangely, though Unicode unifies the sign-value Roman numerals with the very different (though visually similar) Latin letters, the Indic Arabic place-value (positional) decimal digit numerals are repeated 24 times (a total of 240 code points for 10 numerals) throughout the UCS without any relational or decomposition mapping between them.
The presence of these 167 semantically distinct though visually similar characters (plus the borderline 11 Hebrew and Greek letter based symbols and the 6 measurement unit symbols) among the decomposable characters complicates the topic of compatibility characters. The Unicode standard discourages the use of compatibility characters by content authors. However, in certain specialized areas, these characters are important and quite similar to other characters that have not been included among the compatibility characters. For example, in certain academic circles the use of Roman numerals as distinct from Latin letters that share the same glyphs would be no different than the use of Cuneiform numerals or ancient Greek numerals. Collapsing the Roman numeral characters to Latin letter characters eliminates a semantic distinction. A similar situation exists for phonetic alphabet characters that use subscript or superscript positioned glyphs. In the specialized circles that use phonetic alphabets, authors should be able to do so without resorting to rich text protocols. As another example the keyword 'circle' compatibility characters are often used for describing the game Go. However, these uses of the compatibility characters constitute exceptions where the author has a special reason to use the otherwise discouraged characters.
Unfortunately, there are a small number of characters even within the compatibility blocks that themselves are not compatibility characters and therefore may confuse authors. The “Enclosed CJK Letters and Months” block contains a single non-compatibility character: the ‘Korean Standard Symbol’ (㉿ U+327F). This symbol and 12 other characters have been included in these blocks for no known reasons. The “CJK Compatibility Ideographs” block contains these non-compatibility unified Han ideographs:
These thirteen characters are neither compatibility characters nor is their use discouraged in any way. However, there are more complications: the glyph of U+FA23 﨣 looks identical to that of U+27EAF 𧺯, except for
(1) the enclosing part, 走, looking rather connected in the former and rather disjunct in the latter and,
(2) the vertical stroke of the enclosed part, 斗, having a slightly slanted orientation in the former
and a perfectly horizontal orientation in the latter. Accordingly, some sources assign a strokeorder
code of 一一丨一丿㇏丶丶一丨 to U+FA23 﨣 and a strokeorder code of 一丨一丨一丿㇏丶丶一丨 to U+27EAF 𧺯,
seemingly differentiating them. But this interpretation is hard to maintain, considering that
among the almost 480 characters of Unicode 5.1 known to contain the component 走, not a single other
character contains a partial strokeorder of ...一一丨一丿㇏... (except 趧, in which it is part of 是).
In absence of other evidence, then, one has to conclude that the Unicode consortium either (1)
meant to include U+FA23 﨣 as a regular compatibility doublet for U+27EAF 𧺯, but forgot to add the
pertinent piece of information to Unihan.txt; or (2) inadvertently put U+FA23 﨣 into a compatibility
block while believing it to be a unique glyph, being unaware that it actually has a paternal twin
in U+27EAF 𧺯. In any event, a normalized text should never contain both U+27EAF 𧺯 and U+FA23 﨣—these codepoints
represent the same character, encoded twice.
Several other characters in these blocks have no compatibility mapping but are clearly intended for legacy support:
Alphabetic Presentation Forms (1)
Arabic Presentation Forms (4)
CJK Compatibility Forms (2 that are both related to CJK Unified Ideograph: U+4E36 丶)
Enclosed Alphanumerics (21 rich text variants)
Unicode
Unicode is a computing industry standard for the consistent encoding, representation and handling of text expressed in most of the world's writing systems...
and the UCS
Universal Character Set
The Universal Character Set , defined by the International Standard ISO/IEC 10646, Information technology — Universal multiple-octet coded character set , is a standard set of characters upon which many character encodings are based...
, many often refer to compatibility characters. Compatibility characters are graphical characters that are discouraged by the Unicode Consortium. As the Unicode consortium says:
A character that would not have been encoded except for compatibility and round-trip convertibility with other standards
However, the definition is more complicated than the glossary reveals. One of the properties given to characters by the Unicode consortium is the characters' decomposition or compatibility decomposition. Most characters have no value for this property, but over five thousand characters do have a compatibility decomposition mapping that compatibility character to one or more other characters. By setting a character's decomposition property, Unicode establishes that character as a compatibility character. The reasons for these compatibility designations are varied and are discussed in further detail below. The term decomposition can sometimes confuse because a character's decomposition can, in some cases, be a singleton. In these cases the decomposition of one character is simply another equivalent or approximately equivalent character.
Compatibility character types and keywords
The compatibility decomposition property for the 5,402 Unicode compatibility characters includes a keyword that divides the compatibility characters into 17 logical groups. Those characters with a compatibility decomposition but without a keyword are termed canonical decomposable characters and those characters are not compatibility characters. Keywords for compatibility decomposable characters include: <initial>, <medial>, <final>, <isolated>, <wide>, <narrow>, <small>, <square>, <vertical>, <circle>, <noBreak>, <fraction>, <sub>, <super>, and <compat>. These keywords provide some indication of the relation between the compatibility character and its compatibility decomposition character sequence. Compatibility characters fall in three basic categories:- Characters corresponding to multiple alternate glyph forms and precomposed diacritics to support software and font implementations that do not include complete Unicode text layout capabilities.
- Characters included from other character sets or otherwise added to the UCS that constitute rich text rather than the plain text goals of Unicode.
- Some other characters that are semantically distinct, but visually similar.
Because these semantically distinct characters may be displayed with glyphs similar to the glyphs of other characters, text processing software should try to address possible confusion for the sake of end users. When comparing and collating (sorting) text strings, different forms and rich text variants of characters should not alter the text processing results. For example, software users may be confused when performing a find on a page for a capital Latin letter ‘I’ and their software application fails to find the visually similar Roman numeral ‘Ⅰ’.
Glyph substitution and composition
Some compatibility characters are completely dispensable for text processing and display software that conforms to the Unicode standard. These include:- Precomposed diacritic letters. For example Å, (U+00C5), where Unicode prefers to treat such graphemes as two separate characters a capital ‘Latin letter A’ combined with a ‘Combining Ring Above’ (U+030A)
- Ligatures. Ligatures such as ‘ffi’ in the Latin script were often encoded as a separate character in legacy character sets. Unicode’s approach to ligatures is to treat them as rich text and, if turned on, handled through glyph substitution.
- Precomposed Roman numerals. For example, Roman numeral twelve (‘Ⅻ’: U+216B) can be decomposed into a Roman numeral ten (‘Ⅹ’: U+2169) and two Roman numeral ones (‘Ⅰ’: U+2160).
- Precomposed fractions. These decomposition have the keyword <fraction>. A fully conforming text handler should display the vulgar fraction ¼ (U+00BC) identically to the composed fraction 1⁄4 (numeral 1 with fraction slash U+2044 and numeral 4).
- Contextual glyphs or forms . These arise primarily in the Arabic script. Using fonts with glyph substitution capabilities such as OpenTypeOpenTypeOpenType is a format for scalable computer fonts. It was built on its predecessor TrueType, retaining TrueType's basic structure and adding many intricate data structures for prescribing typographic behavior...
and TrueTypeGXApple Advanced TypographyApple Advanced Typography is Apple Inc's computer software for advanced font rendering, supporting internationalization and complex features for typographers, a successor to Apple's little-used QuickDraw GX font technology of the mid-1990s...
, Unicode conforming software can substitute the proper glyphs for the same character depending on whether that character appears at the beginning, end, middle of a word or in isolation. Such glyph substitution is also necessary for vertical (top to bottom) text layout for some East Asian languages. In this case glyphs must be substituted or synthesized for wide, narrow, small and square glyph forms. Non-conforming software or software using other character sets instead use multiple separate character for the same letter depending on its position: further complicating text processing.
The UCS, Unicode character properties and the Unicode algorithms provide software implementations with everything needed to properly display these characters from their decomposition equivalents. Therefore these decomposable compatibility characters become redundant and unnecessary. Their existence in the character set requires extra text processing to ensure text is properly compared and collated (see Unicode normalization). Moreover, these compatibility characters provide no additional or distinct semantics. Nor do these characters provide any visually distinct rendering provided the text layout and fonts are Unicode conforming. Also, none of these characters are required for roundtrip convertibility to other character sets, since the transliteration can easily map decomposed characters to precomposed counterparts in another character set. Similarly, contextual forms, such as a final Arabic letter can be mapped based on its position within a word to the appropriate legacy character set form character.
In order to dispense with these compatibility characters, text software must conform to several Unicode protocols. The software must be able to:
- Compose diacritic marked graphemes from letter characters and one or more separate combining diacritic marks.
- Substitute (at the author or readers discretion) ligatures and contextual glyph variants.
- Layout CJKV text vertically (at the author's or reader's discretion), substituting glyphs for small, vertical, narrow, wide square forms, either from font data or synthesized as needed.
- Combine fractions using the ‘Fraction Slash’ character (U+2044) and any other arbitrary characters.
- Combine a ‘Combining Long Solidus Overlay’ ( ̸ U+0338) with other symbols: for example ∄ or ∄ for ∄. (U+2203).
All together these compatibility characters included for incomplete Unicode implementations total 3,779 of the 5,402 designated compatibility characters. These include all of the compatibility characters marked with the keywords <initial>, <medial>, <final>, <isolated>, <fraction>, <wide>, <narrow>, <small>, <vertical>, <square>. Also it includes nearly all of the canonical and most of the <compat> keyword compatibility characters (the exceptions include those <compat> keyword characters for enclosed alphanumerics, enclosed ideographs and those discussed in the following sections: subsequent section).
Rich text compatibility characters
Many other compatibility characters constitute what Unicode considers rich text and therefore outside the goals of Unicode and UCS. In some sense even compatibility characters discussed in the previous section — those that aid legacy software in displaying ligatures and vertical text — constitute a form of rich text, since the rich text protocols determine whether text is displayed in one way or another. However, the choice to display text with or without ligatures or vertically versus horizontally are both non-semantic rich text. They are simply style differences. This is contrast to other rich text such as italics, superscripts and subscripts, or list markers where the styling of the rich text implies certain semantics along with it.For comparing, collating, handling and storing plain text, rich text variants are semantically redundant. For example, using a superscript character for the numeral 4 is likely indistinguishable from using the standard character for a numeral 4 and then using rich text protocols to make it superscript. Such alternate rich text characters therefore create ambiguity because they appear visually the same as their plain text counterpart characters with rich text formatting applied. These rich text compatibility characters include:
- Mathematical Alphanumeric SymbolsMathematical alphanumeric symbolsMathematical Alphanumeric Symbols is a Unicode block of Latin and Greek letters and decimal digits that enable mathematicians to denote different notions with different letter styles .Unicode now includes many such symbols Mathematical Alphanumeric Symbols is a Unicode block of Latin and Greek...
. These symbols are simply clones of the Latin and Greek alphabets and Indic-Arabic decimal digits repeated in 15 various typefaces. They are intended as an arbitrary palette for mathematical notation. However, they tend to undermine the distinction between encoding characters versus encoding visual glyphs as well as Unicode's goals of supporting only plain text characters. Such alternate styling for a mathematical symbol palette could be easily created through rich text protocols instead. - Enclosed alphanumerics and ideographs (markers) These are characters included primarily for list markers. They do not constitute plain text characters. Moreover, the use of other rich text protocols is more appropriate since, the set of enclosed alphanumerics or ideographs provisioned in the UCS is limited.
- Circled alphanumerics and ideographs. The circled forms are also likely for use as markers. Again, using characters along with rich text protocols to encircle characters strings is more flexible.
- Spaces and no-break spaces of varying widths. These characters are simply rich text variants of the core space (U+0020) and No-break Space (U+00A0). Other rich text protocols should be used instead such as tracking, kerning or word-spacing attributes.
- Some subscript and superscript form characters. Many of the subscript and superscript characters are actually semantically distinct characters from the International Phonetic AlphabetInternational Phonetic AlphabetThe International Phonetic Alphabet "The acronym 'IPA' strictly refers [...] to the 'International Phonetic Association'. But it is now such a common practice to use the acronym also to refer to the alphabet itself that resistance seems pedantic...
and other writing systems and do not really fall in the category of rich text. However, others simply constitute rich text presentation forms of other Greek, Latin and numeral characters. These rich text superscript and subscript characters therefore properly belong to this category of rich text compatibility characters. Most of these are in the "Superscripts and Subscripts" or the "Basic Latin" blocks.
For all of these rich text compatibility characters the display of glyphs is typically distinct from their compatibility decomposition (related) characters. However, these are considered compatibility characters and discouraged for use by the Unicode consortium because they are not plain text characters, which is what Unicode seeks to support with its UCS and associated protocols. Rich text should be handled through non-Unicode protocols such as HTML, CSS, RTF and other such protocols.
The rich text compatibility characters comprise 1,451 of the 5,402 compatibility characters. These include all of the compatibility characters marked with keywords <circle> and <font> (except three listed in the semantically distinct below); 11 spaces variants from the <compat> and canonical characters; and some of the keyword <superscript> and <subscript> from the "Superscripts and Subscripts" block.
Semantically distinct characters
Many compatibility characters are semantically distinct characters, though they may share representational glyphs with other characters. Some of these characters may have been included because most other characters sets that focussed on one script or writing system. So for example, the ISO and other Latin character sets likely included a character for π (pi) since, when focussing on primarily one writing system or script, those character sets would not have otherwise had characters for the common mathematical symbol π;. However, with Unicode, mathematicians are free to use letters from any known script in the World or to select a Unihan ideograph to stand in for a mathematical set or mathematical constant. To date, Unicode has only added specific semantic support for a few such mathematical constants (for example the Planck constant, U+210E, and Euler constant, U+2107, both of which Unicode considers to be compatibility characters). Therefore Unicode designates several mathematical symbols based on letters from Greek and Hebrew as compatibility characters. These include:- Hebrew letter based symbols (4): ℵ Alef (ℵ U+2135), Bet (ℶ U+2136), Gimel (ℷ U+2137) and Dalet (ℸ U+2138)
- Greek letter based symbols (8): Beta (ϐ U+03D0), Theta (ϑ U+03D1), Phi (ϕ U+03D5), Pi (ϖ U+03D6), Kappa (ϰ U+03F0), Rho (ϱ U+03F1), Capital Theta (ϴ U+03F4), Prosgegrammeni (ι U+1FBE).
While these compatibility characters are distinguished from their compatibility decomposition characters only by adding the word “symbol” to their name, they do represent long-standing distinct meanings in written mathematics. However, for all practical purposes they share the same semantics as their compatibility equivalent Greek or Hebrew letter. These may be considered border-line semantically distinguishable characters so they are not included in the total.
Though not the intention of Unicode to encode such measuring units the repertoire includes six (6) such symbols that should not be used by authors: the character’s decomposition should be used instead.
- Unit symbols (6): Angstrom (Å U+212B: use U+00C5 instead), Ohm (Ω, U+2126: use U+03A9 instead), Kelvin (K U+212A: use U+004B instead) Fahrenheit (℉ U+2109: use U+00B0 and U+0046 instead), Celsius (℃ U+2103: use U+00B0 and U+0043 instead), Micro Sign (µ U+00B5: use U+03BC instead)
Unicode also designates twenty-two (22) other letter-like symbols as compatibility characters.
- Other Greek letter-based symbols (4): Lunate Epsilon (ϵ U+03F5), Lunate Sigma (ϲ U+03F2), Capital Lunate Sigma (Ϲ U+03F9), Upsilon with Hook (ϒ U+03D2)
- Mathematical constants (3): Euler Constant (ℇ U+2107), Planck ConstantPlanck constantThe Planck constant , also called Planck's constant, is a physical constant reflecting the sizes of energy quanta in quantum mechanics. It is named after Max Planck, one of the founders of quantum theory, who discovered it in 1899...
(ℎ U+210E), reduced Planck constant (ℏ U+210F), - Currency symbols (2): Rupee Sign (₨ U+20A8), Rial Sign (﷼ U+FDFC)
- Punctuation (4): One Dot Leader (U+2024), No Break Space (U+00A0), Non-breaking Hyphen (U+2011), Tibetan Mark Delimiter Tsheg Bstar (U+0F0C)
- Other letter-like symbols (10): Information Source (ℹ U+2139), Account Of (℀ U+2100), Addressed to the Subject (℁ U+2101), Care of (℅ U+2105), Cada una (℆ U+2106), NumeroNumero signThe numero sign or numero symbol is a typographic abbreviation of the word number indicating ordinal numeration, especially in names and titles...
(№ U+2116), Telephone Sign (℡ U+2121), Facsimile Sign (℻ U+213B), Trademark (™ U+2122), Service Mark (℠ U+2120)
In addition, several scripts use glyph position such as superscripts and subscripts to differentiate semantics. In these cases subscripts and superscripts are not merely rich text, but constitute a distinct character — similar to a hybrid between a diacritic and a letter — in the writing system (130 total).
- 112 characters representing abstract phonemes from phonetic alphabets such as the International Phonetic AlphabetInternational Phonetic AlphabetThe International Phonetic Alphabet "The acronym 'IPA' strictly refers [...] to the 'International Phonetic Association'. But it is now such a common practice to use the acronym also to refer to the alphabet itself that resistance seems pedantic...
use such positional glyphs to represent semantic differences (U+1D2C – U+1D6A, U+1D78, U+1D9B – U+1DBF, U+02B0 – U+02B8, U+02E0 – U+02E4 ) - 14 characters from the Kanbun block (U+3192 – U+319F)
- 1 character from the Tifinagh script: Tifinagh Modifier Letter Labialization Mark (ⵯ U+2D6F)
- 1 character from the Georgian script: Modifier Letter Georgian Nar (ჼ U+10FC)
- masculine (U+00BA) and feminine (U+00AA) ordinal indicators included in the Latin-1 supplement block
Finally, Unicode designates Roman numerals as compatibility equivalence to the Latin letters that share the same glyphs. Here the Unicode Standard make the same mistake in confusing glyph and character that it so often seeks to prevent. Certainly there's a need to deal with the visual ambiguity these characters may suffer when sharing the same glyphs, however a sign-value
Sign-value notation
A sign-value notation represents numbers by a series of numeric signs that added together equal the number represented. In Roman numerals for example, X means ten and L means fifty. Hence LXXX means eighty . There is no need for zero in sign-value notation...
numeral for one is certainly a semantically distinct character from a Latin capital or small letter ‘i’. A similar visual ambiguity exists between such characters as the Latin capital letter A ( U+0041) and the Greek capital letter Alpha (Α U+0391), yet Unicode does not unify those characters.
- Capital Roman Numerals (7): One (Ⅰ U+2160), Five (Ⅴ U+2164), Ten (Ⅹ U+2169), Fifty (Ⅼ U+216C), One Hundred (Ⅽ U+216D), Five Hundred (Ⅾ U+216E), One Thousand (Ⅿ U+216F)
- and lower case variants (7): One (ⅰ U+2170), Five (ⅴ U+2174), Ten (ⅹ U+2179), Fifty (ⅼ U+217C), One Hundred (ⅽ U+217D), Five Hundred (ⅾ U+217E) and One Thousand (ⅿ U+217F)
- 18 precomposed Roman numerals in uppercase and lowercase variants (2-4, 6-9 and 11-12)
Roman numeral One Thousand actually has a third character representing a third form or glyph for the same semantic unit: One Thousand C D (ↀ U+2180). From this glyph, one can see where the practice of using a Latin M may have arisen. Strangely, though Unicode unifies the sign-value Roman numerals with the very different (though visually similar) Latin letters, the Indic Arabic place-value (positional) decimal digit numerals are repeated 24 times (a total of 240 code points for 10 numerals) throughout the UCS without any relational or decomposition mapping between them.
The presence of these 167 semantically distinct though visually similar characters (plus the borderline 11 Hebrew and Greek letter based symbols and the 6 measurement unit symbols) among the decomposable characters complicates the topic of compatibility characters. The Unicode standard discourages the use of compatibility characters by content authors. However, in certain specialized areas, these characters are important and quite similar to other characters that have not been included among the compatibility characters. For example, in certain academic circles the use of Roman numerals as distinct from Latin letters that share the same glyphs would be no different than the use of Cuneiform numerals or ancient Greek numerals. Collapsing the Roman numeral characters to Latin letter characters eliminates a semantic distinction. A similar situation exists for phonetic alphabet characters that use subscript or superscript positioned glyphs. In the specialized circles that use phonetic alphabets, authors should be able to do so without resorting to rich text protocols. As another example the keyword 'circle' compatibility characters are often used for describing the game Go. However, these uses of the compatibility characters constitute exceptions where the author has a special reason to use the otherwise discouraged characters.
Compatibility Blocks
Several blocks of Unicode characters include either entirely or almost entirely all compatibility characters (U+F900–U+FFEF except for the nonchars). These compatibility blocks contain none of the semantically distinct compatibility characters with only one exception: the Rial Sign currency symbol (﷼ U+FDFC) So the compatibility decomposable characters in the compatibility blocks fall unambiguously into the set of discouraged characters. Unicode recommends authors use the plain text compatibility decomposition equivalents instead and complement those characters with rich text markup. This approach is much more flexible and open-ended than using the finite set of circled or enclosed alphanumerics to give just one example.Unfortunately, there are a small number of characters even within the compatibility blocks that themselves are not compatibility characters and therefore may confuse authors. The “Enclosed CJK Letters and Months” block contains a single non-compatibility character: the ‘Korean Standard Symbol’ (㉿ U+327F). This symbol and 12 other characters have been included in these blocks for no known reasons. The “CJK Compatibility Ideographs” block contains these non-compatibility unified Han ideographs:
- (U+FA0E): 﨎
- (U+FA0F): 﨏
- (U+FA11): 﨑
- (U+FA13): 﨓
- (U+FA14): 﨔
- (U+FA1F): 﨟
- (U+FA21): 﨡
- (U+FA23): 﨣
- (U+FA24): 﨤
- (U+FA27): 﨧
- (U+FA28): 﨨
- (U+FA29): 﨩
These thirteen characters are neither compatibility characters nor is their use discouraged in any way. However, there are more complications: the glyph of U+FA23 﨣 looks identical to that of U+27EAF 𧺯, except for
(1) the enclosing part, 走, looking rather connected in the former and rather disjunct in the latter and,
(2) the vertical stroke of the enclosed part, 斗, having a slightly slanted orientation in the former
and a perfectly horizontal orientation in the latter. Accordingly, some sources assign a strokeorder
code of 一一丨一丿㇏丶丶一丨 to U+FA23 﨣 and a strokeorder code of 一丨一丨一丿㇏丶丶一丨 to U+27EAF 𧺯,
seemingly differentiating them. But this interpretation is hard to maintain, considering that
among the almost 480 characters of Unicode 5.1 known to contain the component 走, not a single other
character contains a partial strokeorder of ...一一丨一丿㇏... (except 趧, in which it is part of 是).
In absence of other evidence, then, one has to conclude that the Unicode consortium either (1)
meant to include U+FA23 﨣 as a regular compatibility doublet for U+27EAF 𧺯, but forgot to add the
pertinent piece of information to Unihan.txt; or (2) inadvertently put U+FA23 﨣 into a compatibility
block while believing it to be a unique glyph, being unaware that it actually has a paternal twin
in U+27EAF 𧺯. In any event, a normalized text should never contain both U+27EAF 𧺯 and U+FA23 﨣—these codepoints
represent the same character, encoded twice.
Several other characters in these blocks have no compatibility mapping but are clearly intended for legacy support:
Alphabetic Presentation Forms (1)
- Hebrew Point Judeo-Spanish Varika (U+FB1E): ﬞ. This is a glyph variant of Hebrew Point Rafe (U+05BF): ֿ , though Unicode provides no compatibility mapping.
Arabic Presentation Forms (4)
- “Ornate Left Parenthesis” (U+FD3E): ﴾. A glyph variant for U+0029 ‘)’
- “Ornate Right Parenthesis” (U+FD3F): ﴿. A glyph variant for U+0028 ‘ (’
- “Ligature Bismillah Ar-Rahman Ar-Raheem” (U+FDFD): ﷽. Bismillah Ar-Rahman Ar-Raheem is a ligature for Teh Marbuta (U+0629), Lam (U+0644), Meem (U+0645), Seen (U+0633), Beh (U+0628), (بسملة)
- “Arabic Tail Fragment” (U+FE73): ﹳ for supporting text systems without contextual glyph handling
CJK Compatibility Forms (2 that are both related to CJK Unified Ideograph: U+4E36 丶)
- Sesame Dot (U+FE45): ﹅
- White Sesame Dot (U+FE46): ﹆
Enclosed Alphanumerics (21 rich text variants)
- 10 Negative Circled Numbers (0 and 11 through 20) (U+24FF and U+24EB through U+24F4): ⓫ – ⓴
- 11 Double Circled Numbers (0 through 10) (U+24F5 through U+24FE): ⓵ – ⓾
Normalization
Normalization is the process by which Unicode conforming software first performs compatibility decomposition before making comparisons or collating text strings. This is similar to other operations needed when, for example, a user performs a case or diacritic insensitive search within some text. In such cases software must equate or ignore characters it would not otherwise equate or ignore. Typically normalization is performed without altering the underlying stored text data (lossless). However, some software may potentially make permanent changes to text that eliminates the canonical or even non-canonical compatibility characters differences from text storage (lossy).External links
- Normalization (Chinese Text Project) - Unicode normalization issues in classical Chinese, with list of normalized CJK codepoints