CT1
Encyclopedia
CT1 stands for Cordless telephone generation 1 and is an analog cordless telephone
standard that was standardized by the European Conference of Postal and Telecommunications Administrations
(CEPT) in 1984 and deployed in eleven European countries. The initial set of frequencies provided for a set 40 duplex channels using 25 kHz separation, with the phones transmitting in the 914-915 MHz band and the base stations in the 959-960 MHz band. These frequencies overlap with those used by channels 120-124 on GSM cellular phones and thus these original frequencies have been withdrawn from use for cordless phones in the countries that originally authorized them.
CT1+ provided in 1987 for a set of 80 additional channels using the same technical standard with 885–887 MHz used by the phones and 930–932 MHz used by the base stations. While not part of the original GSM-900 band, the frequencies do overlap with the extended GSM-900 band. Thus between the advent of digital cordless telephones and the desire to free up spectrum for mobile telephones, these frequencies are being withdrawn for use as well.
CT0 is a term used for pre-CT1 analog cordless telephones that were deployed in a variety of countries with incompatible standards, mostly in the low VHF frequency range below broadcast Band I
.
Since 31. December 2008 CTA1 and CTA2 based phones are forbidden in Germany
.
Cordless telephone
A cordless telephone or portable telephone is a telephone with a wireless handset that communicates via radio waves with a base station connected to a fixed telephone line, usually within a limited range of its base station...
standard that was standardized by the European Conference of Postal and Telecommunications Administrations
European Conference of Postal and Telecommunications Administrations
The European Conference of Postal and Telecommunications Administrations was established on June 26, 1959, as a coordinating body for European state telecommunications and postal organizations...
(CEPT) in 1984 and deployed in eleven European countries. The initial set of frequencies provided for a set 40 duplex channels using 25 kHz separation, with the phones transmitting in the 914-915 MHz band and the base stations in the 959-960 MHz band. These frequencies overlap with those used by channels 120-124 on GSM cellular phones and thus these original frequencies have been withdrawn from use for cordless phones in the countries that originally authorized them.
CT1+ provided in 1987 for a set of 80 additional channels using the same technical standard with 885–887 MHz used by the phones and 930–932 MHz used by the base stations. While not part of the original GSM-900 band, the frequencies do overlap with the extended GSM-900 band. Thus between the advent of digital cordless telephones and the desire to free up spectrum for mobile telephones, these frequencies are being withdrawn for use as well.
CT0 is a term used for pre-CT1 analog cordless telephones that were deployed in a variety of countries with incompatible standards, mostly in the low VHF frequency range below broadcast Band I
Band I
Band I is the name of a radio frequency range within the very high frequency part of the electromagnetic spectrum.Band I ranges from 47 to 88 MHz, and it is primarily used for radio and television broadcasting....
.
Since 31. December 2008 CTA1 and CTA2 based phones are forbidden in Germany
Germany
Germany , officially the Federal Republic of Germany , is a federal parliamentary republic in Europe. The country consists of 16 states while the capital and largest city is Berlin. Germany covers an area of 357,021 km2 and has a largely temperate seasonal climate...
.
See also
- CT2CT2CT2 is a cordless telephony standard that was used in the early 1990s to provide short-range proto-mobile phone service in some countries in Europe. It is considered the precursor to the popular DECT system...
a digital cordless telephone standard that was the initial successor to CT1.