Cairns Tilt Train derailment
Encyclopedia
The Cairns Tilt Train derailment occurred at 11:55 pm on 15 November 2004 when the City of Townsville diesel tilt train
derailed north of Berajondo, approximately 342 km (212.5 mi) northwest of Brisbane
, the state capital of Queensland
, Australia
.
The prima facie
cause of the incident was excessive speed; the train was travelling at 112 km/h (69.6 mph) when it derailed at the beginning of a curve with a speed limit of 60 km/h (37.3 mph). Despite the seriousness of the incident, there were no fatalities.
Following from the successful introduction of the two electric tilting trains between Brisbane
and Rockhampton
in 1998, the twin City of Cairns and City of Townsville diesel-powered tilt trains were introduced to service on 15 June 2003 between Brisbane and Cairns. As only a third of the North Coast railway line
from Brisbane to Cairns is electrified, the two diesel trains were required for services to farther major coastal destinations such as Townsville and Cairns.
Originally to be called "The Tropical Explorer" with a colourful, tropical livery reflecting "the sun, blue sky, beach and palms", the name was soon quietly dropped and instead called the "Cairns Tilt Train" similar to its earlier electric version, with a simple, plain yellow and maroon striped livery along its stainless steel body.
The two trains operate at speeds of up to 160 km/h (99.4 mph) and consist of two 1350 kW push-pull diesel engines
at either end (4 engines per train), six sitting cars, and one Club Car complemented with a trolley service delivering meals to seats. Passengers enjoy 2x1 Business Class seating throughout the train with an individual entertainment system of multiple movie and audio channels.
The two trains are fitted with a data logger, manufactured by the Finnish company EKE Electronics Ltd., that records information about the vehicle and track, maintenance data, and the speed and operation of the train. This information was retrieved from the unit and used by investigators in determining the cause of the incident.
While QR had Automatic Train Protection
implemented on the line, a more proactive form of protection that would apply the train's brakes if the driver failed to respond to warnings, it was not implemented for tilt trains as it believed the protection methods it was using would be sufficient.
and Cairns by seven hours compared to existing services, and the timetable was formulated in such a way that it offered a daylight service between Mackay
and Cairns so as to not directly compete with its electric equivalent to Rockhampton
. Services were three times a week, departing Roma Street railway station, Brisbane
on Mondays, Wednesdays and Fridays at 6:25 pm, arriving Cairns railway station Tuesdays, Thursdays and Saturdays at 7:20 pm; returning from Cairns on Sundays, Wednesdays and Fridays at 8:15 am, arriving Brisbane at 9:10 am on Mondays, Thursdays and Saturdays.
in the Brisbane central business district
on-time at 6:25 pm on a normal scheduled service to Cairns, numbered VCQ5. The full journey is split into parts, with first change of crew at Bundaberg; the drivers of the first part of the journey found no defects with the train and reported the trip as uneventful.
Departing Bundaberg two minutes early at 11:11 pm with a driver and co-driver, five passenger service attendants and 150 passengers, the City of Townsville reached Berajondo at 11:50 pm. Four minutes later, after passing through a series of curved sections of track with speed-restrictions between 60 km/h (37.3 mph) and 80 km/h (49.7 mph), the co-driver left his seat and driver's cabin and went to a vestibule area adjacent to make a "brew
" for the driver, as he had complained about the quality of the beverage that was offered at Bundaberg.
The driver maintained control of the train and was operating it normally, keeping it under or close to posted speed limits. Travelling at 111 km/h (69 mph) with a limit of 150 km/h (93.2 mph), at 11:55:11 pm the train passed over a mid-section train protected magnet to warn of the reduced speed limit ahead. The driver immediately acknowledged the alarm, and kept the train at speed with the train's throttle at 60 per cent power. At 11:55:24 pm, close to the posted 60 km/h (37.3 mph) speed limit sign, the driver moved the train's throttle to zero power, then to emergency braking less than one second after.
At 11:55:27 pm, 419.493 km (260.7 mi) from Brisbane (Roma Street), the City of Townsville derailed while travelling at 112 km/h (69.6 mph). The lead power car 5403 came to rest 108 m (354.3 ft) past the point of derailment parallel to the track after skidding onto its right side. Baggage car 'A' came to rest upright behind it, first sitting car 'B' was approximately 40 degrees off to the line of travel, sitting cars 'C' and 'D' jack-knifed at right angles to the track. Car 'E', a club car, came to rest parallel to the track but some 15 m (49.2 ft) away from it due to the force of the derailing cars before and after it. Sitting car 'F' was about 90 degrees right angle to the track, while the last sitting car 'G' was on the left side of the track. The trailing power car 5404 remained upright with just its lead bogie set partially derailed to the left. All cars became detached except for cars 'A' and 'B'.
As the City of Townsville derailed underneath electrified overhead lines, the Electrical Control Operator at Rockhampton
contacted the North Coast Control at 11:57 pm to report that a circuit breaker
had tripped the 25 kV
AC
traction power supply approximately 419 km north of Brisbane. North Coast Control identified this site as where the tilt train was travelling through, and tried to contact the driver a number of times by radio but did not receive a response. As the train is powered by diesel engines, it would not necessarily have been affected by an interruption to the overhead power supply. At the same time, a passenger from the derailed train called emergency services on his own mobile phone and raised the alarm of the incident. News of this incident was reported back to North Coast Control and at 12:02 am, and along with the report by the Electrical Control Operator of the overhead traction power supply being tripped, it was recognised that a major incident had occurred.
to look at causes for the incident and to make recommendations to prevent it happening again.
Commissioner, Robert Atkinson, released the data held in the train event recorder that showed that the train was travelling at 112 km/h (69.6 mph) when it derailed, at a point with a signposted limit of 60 km/h (37.3 mph). Scheuber said that it was not known if the train's speed was the only cause of the derailment, but that "it would be one of the contributing factors". The release of this information angered the Australian Federated Union of Locomotive Employees, which covers train crews including drivers, who threatened a 24-hour strike on Friday, pending a telephone hook-up with members on Thursday night. The industrial action did not proceed.
cause of the derailment was that the train was travelling at an excessive speed – 112 km/h (69.6 mph) at the beginning of a curve with a posted speed limit of 60 km/h (37.3 mph). The lead power car rolled, dragging most of the remaining cars off the track. The driver did not reduce the speed of the train before it entered the curve where it derailed. The investigation believed that there was no evidence that the driver deliberately ignored speed limits or drove in excess of limits, nor that he intended the train to derail. Up to the time of the derailment, the train was in steady power, and the train's brakes were not activated until just before it derailed. The report found that the driver may have been disorientated or distracted up to the curve, and did not recognise the geographic proximity and where the train was at the time.
At 417.733 km (259.6 mi) from Brisbane, 1.76 km (1.1 mi) and 61 seconds before the derailment, the posted speed limit for the Tilt Train was 150 km/h (93.2 mph), an increase from 110 km/h (68.4 mph). The report found that it may have been possible that the driver mistook the mid-section alarm to be the station protection magnet alarm located before Baffle. After the curve where the train derailed is a similar layout of track, where, after an increase of the speed limit to 150 km/h (93.2 mph), is a left curve with a speed limit of 110 km/h (68.4 mph) before Baffle.
The report also found that the driver may have left the driving position for a moment to get food from his bag or the train's mini fridge, under the belief that it was safe to do so. After reorientating himself returning to his seat, it would have been too late to apply the emergency brakes with the train travelling too fast.
The second driver absence from the drivers' cabin removed one of the primary defenses of having two drivers in the cab to avoid errors made by just one. The co-driver sits to the right of the driver, and their main task is to observe that the driver is controlling the train safely, to watch the direction the train is travelling and call signals verbally to which the driver acknowledges. The co-driver can intervene in the control of the train should the driver not react appropriately. Before the derailment, there was no requirement for the co-driver to call-out critical speed limit changes, nor prohibit the co-driver from leaving the drivers' cabin to, say, prepare beverages in the adjacent area.
The weather condition in the area was fine, wind was low, and the temperature was 24.5 °C (76.1 °F). The moon had set at 7:23 pm, over four hours earlier, and was 26° below the horizon, meaning that while visibility was good, the area the train was operating was in complete darkness. With the exception of the illumination given by the train's headlights, this darkness exposed a weakness in another of the train's protection methods – drivers having knowledge and competence of the route they operate in – as landmarks cannot be seen and drivers' field of view
is reduced and their spatial awareness compromised.
and associated wiring were destroyed had to be replaced. The total cost of the incident, including subsequent investigation, was estimated to be A$
35.5 million.
Repairs to the track were completed on 20 November 2004, five days after the derailment. All tilt trains were limited to a maximum operational speed of 100 km/h (62.1 mph) throughout the state, and resumed higher running speeds on 15 June 2007 after owner and operator QR had implemented a series of safety recommendations from the investigations including fitting the fleet with Automatic Train Protection
that would automatically slow or stop the train if the driver has not responded to or ignored warnings of a stop signal ahead or a curve speed restriction.
The derailed Diesel Tilt Train #VCQ5 sustained a considerable amount of damage and some needed structural repairs. Thirty EDI Rail trade staff and twenty support staff from Korea
, Holland, Japan
and Germany
worked on repairs estimated to cost A$30 million.
The City of Townsville was fully repaired by its manufacturer, Downer EDI Rail in Maryborough
, and returned to service.
Tilting train
A tilting train is a train that has a mechanism enabling increased speed on regular rail tracks. As a train rounds a curve at speed, objects inside the train experience centrifugal force. This can cause packages to slide about or seated passengers to feel squashed by the outboard armrest due to...
derailed north of Berajondo, approximately 342 km (212.5 mi) northwest of Brisbane
Brisbane
Brisbane is the capital and most populous city in the Australian state of Queensland and the third most populous city in Australia. Brisbane's metropolitan area has a population of over 2 million, and the South East Queensland urban conurbation, centred around Brisbane, encompasses a population of...
, the state capital of Queensland
Queensland
Queensland is a state of Australia, occupying the north-eastern section of the mainland continent. It is bordered by the Northern Territory, South Australia and New South Wales to the west, south-west and south respectively. To the east, Queensland is bordered by the Coral Sea and Pacific Ocean...
, Australia
Australia
Australia , officially the Commonwealth of Australia, is a country in the Southern Hemisphere comprising the mainland of the Australian continent, the island of Tasmania, and numerous smaller islands in the Indian and Pacific Oceans. It is the world's sixth-largest country by total area...
.
The prima facie
Prima facie
Prima facie is a Latin expression meaning on its first encounter, first blush, or at first sight. The literal translation would be "at first face", from the feminine form of primus and facies , both in the ablative case. It is used in modern legal English to signify that on first examination, a...
cause of the incident was excessive speed; the train was travelling at 112 km/h (69.6 mph) when it derailed at the beginning of a curve with a speed limit of 60 km/h (37.3 mph). Despite the seriousness of the incident, there were no fatalities.
The train
Brisbane
Brisbane is the capital and most populous city in the Australian state of Queensland and the third most populous city in Australia. Brisbane's metropolitan area has a population of over 2 million, and the South East Queensland urban conurbation, centred around Brisbane, encompasses a population of...
and Rockhampton
Rockhampton
Rockhampton can refer to:* Rockhampton, Queensland is a city in Queensland, Australia* Rockhampton City, Queensland, a suburb of Rockhampton, Queensland* Electoral district of Rockhampton, Queensland, Australia...
in 1998, the twin City of Cairns and City of Townsville diesel-powered tilt trains were introduced to service on 15 June 2003 between Brisbane and Cairns. As only a third of the North Coast railway line
North Coast railway line, Queensland
The North Coast railway line is a narrow gauge railway line in Queensland, Australia. It runs from Brisbane, along the Queensland coast to Cairns in Far North Queensland. The line is electrified between Brisbane and Rockhampton...
from Brisbane to Cairns is electrified, the two diesel trains were required for services to farther major coastal destinations such as Townsville and Cairns.
Originally to be called "The Tropical Explorer" with a colourful, tropical livery reflecting "the sun, blue sky, beach and palms", the name was soon quietly dropped and instead called the "Cairns Tilt Train" similar to its earlier electric version, with a simple, plain yellow and maroon striped livery along its stainless steel body.
The two trains operate at speeds of up to 160 km/h (99.4 mph) and consist of two 1350 kW push-pull diesel engines
Push-pull train
Push–pull is a mode of operation for locomotive-hauled trains allowing them to be driven from either end.A push–pull train has a locomotive at one end of the train, connected via some form of remote control, such as multiple-unit train control, to a vehicle equipped with a control cab at the other...
at either end (4 engines per train), six sitting cars, and one Club Car complemented with a trolley service delivering meals to seats. Passengers enjoy 2x1 Business Class seating throughout the train with an individual entertainment system of multiple movie and audio channels.
The two trains are fitted with a data logger, manufactured by the Finnish company EKE Electronics Ltd., that records information about the vehicle and track, maintenance data, and the speed and operation of the train. This information was retrieved from the unit and used by investigators in determining the cause of the incident.
Train protection systems
QR, using the experience of its many years of railway operations, developed a series of protection methods to reduce the risk of accidents to its tilting trains. The City of Townsville was under the protection of:- two driver operation – a co-driver acting as an observer to assist the driver, and ensure the driver is operating the train safely; they observe the route ahead independently and call signalsRailway signalA signal is a mechanical or electrical device erected beside a railway line to pass information relating to the state of the line ahead to train/engine drivers. The driver interprets the signal's indication and acts accordingly...
, which the driver acknowledges, and can intervene if the driver does not respond appropriately - on-board vigilance systemDead-man's vigilance deviceA dead-man's vigilance device is a railroad safety device that operates in the case of incapacitation of the engineer. It is a hybrid between a dead-man's switch and a vigilance control....
– a device that tests the alertness of the driver with stimuli, and activates train brakes if there is no response - Station Protection System – a system of sensors on the track to warn drivers with an alarm when they are approaching a station area that requires greater attention
- speed boards – posted signs beside the track that show drivers the speed they are required to have their train at or below before passing
- training – to ensure drivers are competent, which includes knowledge of the route the train operates along so drivers can recognise their geographic position and manage speed accordingly.
While QR had Automatic Train Protection
Automatic Train Protection
Automatic Train Protection in Great Britain refers to either of two implementations of a train protection system installed in some trains in order to help prevent collisions through a driver's failure to observe a signal or speed restriction...
implemented on the line, a more proactive form of protection that would apply the train's brakes if the driver failed to respond to warnings, it was not implemented for tilt trains as it believed the protection methods it was using would be sufficient.
The service
When introduced, the Cairns Tilt Train cut the travel time between BrisbaneBrisbane
Brisbane is the capital and most populous city in the Australian state of Queensland and the third most populous city in Australia. Brisbane's metropolitan area has a population of over 2 million, and the South East Queensland urban conurbation, centred around Brisbane, encompasses a population of...
and Cairns by seven hours compared to existing services, and the timetable was formulated in such a way that it offered a daylight service between Mackay
Mackay, Queensland
Mackay is a city on the eastern coast of Queensland, Australia, about north of Brisbane, on the Pioneer River. Mackay is nicknamed the sugar capital of Australia because its region produces more than a third of Australia's cane sugar....
and Cairns so as to not directly compete with its electric equivalent to Rockhampton
Rockhampton
Rockhampton can refer to:* Rockhampton, Queensland is a city in Queensland, Australia* Rockhampton City, Queensland, a suburb of Rockhampton, Queensland* Electoral district of Rockhampton, Queensland, Australia...
. Services were three times a week, departing Roma Street railway station, Brisbane
Roma Street railway station, Brisbane
Roma Street railway station is a major railway station in the Brisbane central business district, the state capital of Queensland, Australia. It was Brisbane's first railway station, opening in 1876...
on Mondays, Wednesdays and Fridays at 6:25 pm, arriving Cairns railway station Tuesdays, Thursdays and Saturdays at 7:20 pm; returning from Cairns on Sundays, Wednesdays and Fridays at 8:15 am, arriving Brisbane at 9:10 am on Mondays, Thursdays and Saturdays.
Incident
The City of Townsville diesel Tilt Train departed Roma Street railway stationRoma Street railway station, Brisbane
Roma Street railway station is a major railway station in the Brisbane central business district, the state capital of Queensland, Australia. It was Brisbane's first railway station, opening in 1876...
in the Brisbane central business district
Brisbane central business district
The Brisbane central business district , sometimes referred to as the city, is a suburb of Brisbane, Queensland, Australia and is located on a point on the northern bank of the Brisbane River. The triangular shaped area is bounded by the Brisbane River to the east, south and west...
on-time at 6:25 pm on a normal scheduled service to Cairns, numbered VCQ5. The full journey is split into parts, with first change of crew at Bundaberg; the drivers of the first part of the journey found no defects with the train and reported the trip as uneventful.
Departing Bundaberg two minutes early at 11:11 pm with a driver and co-driver, five passenger service attendants and 150 passengers, the City of Townsville reached Berajondo at 11:50 pm. Four minutes later, after passing through a series of curved sections of track with speed-restrictions between 60 km/h (37.3 mph) and 80 km/h (49.7 mph), the co-driver left his seat and driver's cabin and went to a vestibule area adjacent to make a "brew
Tea
Tea is an aromatic beverage prepared by adding cured leaves of the Camellia sinensis plant to hot water. The term also refers to the plant itself. After water, tea is the most widely consumed beverage in the world...
" for the driver, as he had complained about the quality of the beverage that was offered at Bundaberg.
The driver maintained control of the train and was operating it normally, keeping it under or close to posted speed limits. Travelling at 111 km/h (69 mph) with a limit of 150 km/h (93.2 mph), at 11:55:11 pm the train passed over a mid-section train protected magnet to warn of the reduced speed limit ahead. The driver immediately acknowledged the alarm, and kept the train at speed with the train's throttle at 60 per cent power. At 11:55:24 pm, close to the posted 60 km/h (37.3 mph) speed limit sign, the driver moved the train's throttle to zero power, then to emergency braking less than one second after.
At 11:55:27 pm, 419.493 km (260.7 mi) from Brisbane (Roma Street), the City of Townsville derailed while travelling at 112 km/h (69.6 mph). The lead power car 5403 came to rest 108 m (354.3 ft) past the point of derailment parallel to the track after skidding onto its right side. Baggage car 'A' came to rest upright behind it, first sitting car 'B' was approximately 40 degrees off to the line of travel, sitting cars 'C' and 'D' jack-knifed at right angles to the track. Car 'E', a club car, came to rest parallel to the track but some 15 m (49.2 ft) away from it due to the force of the derailing cars before and after it. Sitting car 'F' was about 90 degrees right angle to the track, while the last sitting car 'G' was on the left side of the track. The trailing power car 5404 remained upright with just its lead bogie set partially derailed to the left. All cars became detached except for cars 'A' and 'B'.
As the City of Townsville derailed underneath electrified overhead lines, the Electrical Control Operator at Rockhampton
Rockhampton
Rockhampton can refer to:* Rockhampton, Queensland is a city in Queensland, Australia* Rockhampton City, Queensland, a suburb of Rockhampton, Queensland* Electoral district of Rockhampton, Queensland, Australia...
contacted the North Coast Control at 11:57 pm to report that a circuit breaker
Circuit breaker
A circuit breaker is an automatically operated electrical switch designed to protect an electrical circuit from damage caused by overload or short circuit. Its basic function is to detect a fault condition and, by interrupting continuity, to immediately discontinue electrical flow...
had tripped the 25 kV
Volt
The volt is the SI derived unit for electric potential, electric potential difference, and electromotive force. The volt is named in honor of the Italian physicist Alessandro Volta , who invented the voltaic pile, possibly the first chemical battery.- Definition :A single volt is defined as the...
AC
Alternating current
In alternating current the movement of electric charge periodically reverses direction. In direct current , the flow of electric charge is only in one direction....
traction power supply approximately 419 km north of Brisbane. North Coast Control identified this site as where the tilt train was travelling through, and tried to contact the driver a number of times by radio but did not receive a response. As the train is powered by diesel engines, it would not necessarily have been affected by an interruption to the overhead power supply. At the same time, a passenger from the derailed train called emergency services on his own mobile phone and raised the alarm of the incident. News of this incident was reported back to North Coast Control and at 12:02 am, and along with the report by the Electrical Control Operator of the overhead traction power supply being tripped, it was recognised that a major incident had occurred.
Investigation
Three investigations were launched after the incident: internally within QR; by Queensland Transport as rail safety in Queensland is regulated by the state government department, along with the Department of Industrial Relations' Division of Workplace Health and Safety and Electrical Safety Office; and the Australian Transport Safety BureauAustralian Transport Safety Bureau
The Australian Transport Safety Bureau is Australia’s national transport safety investigator. The ATSB is the federal government body responsible for investigating transport-related accidents and incidents within Australia. It covers air, sea and rail travel. The Australian Transport Safety...
to look at causes for the incident and to make recommendations to prevent it happening again.
Initial train event recorder release
On 17 November 2004, just over a day after the derailment, QR's Chief Executive Officer, Bob Scheuber, along with the Queensland PoliceQueensland Police
The Queensland Police Service is the law enforcement agency responsible for policing the Australian state of Queensland. In 1990, the Queensland Police Force was officially renamed the Queensland Police Service and the old motto of "Firmness with Courtesy" was changed to "With Honour We Serve"...
Commissioner, Robert Atkinson, released the data held in the train event recorder that showed that the train was travelling at 112 km/h (69.6 mph) when it derailed, at a point with a signposted limit of 60 km/h (37.3 mph). Scheuber said that it was not known if the train's speed was the only cause of the derailment, but that "it would be one of the contributing factors". The release of this information angered the Australian Federated Union of Locomotive Employees, which covers train crews including drivers, who threatened a 24-hour strike on Friday, pending a telephone hook-up with members on Thursday night. The industrial action did not proceed.
Australian Transport Safety Bureau investigation findings
Firstly, the prima faciePrima facie
Prima facie is a Latin expression meaning on its first encounter, first blush, or at first sight. The literal translation would be "at first face", from the feminine form of primus and facies , both in the ablative case. It is used in modern legal English to signify that on first examination, a...
cause of the derailment was that the train was travelling at an excessive speed – 112 km/h (69.6 mph) at the beginning of a curve with a posted speed limit of 60 km/h (37.3 mph). The lead power car rolled, dragging most of the remaining cars off the track. The driver did not reduce the speed of the train before it entered the curve where it derailed. The investigation believed that there was no evidence that the driver deliberately ignored speed limits or drove in excess of limits, nor that he intended the train to derail. Up to the time of the derailment, the train was in steady power, and the train's brakes were not activated until just before it derailed. The report found that the driver may have been disorientated or distracted up to the curve, and did not recognise the geographic proximity and where the train was at the time.
At 417.733 km (259.6 mi) from Brisbane, 1.76 km (1.1 mi) and 61 seconds before the derailment, the posted speed limit for the Tilt Train was 150 km/h (93.2 mph), an increase from 110 km/h (68.4 mph). The report found that it may have been possible that the driver mistook the mid-section alarm to be the station protection magnet alarm located before Baffle. After the curve where the train derailed is a similar layout of track, where, after an increase of the speed limit to 150 km/h (93.2 mph), is a left curve with a speed limit of 110 km/h (68.4 mph) before Baffle.
The report also found that the driver may have left the driving position for a moment to get food from his bag or the train's mini fridge, under the belief that it was safe to do so. After reorientating himself returning to his seat, it would have been too late to apply the emergency brakes with the train travelling too fast.
The second driver absence from the drivers' cabin removed one of the primary defenses of having two drivers in the cab to avoid errors made by just one. The co-driver sits to the right of the driver, and their main task is to observe that the driver is controlling the train safely, to watch the direction the train is travelling and call signals verbally to which the driver acknowledges. The co-driver can intervene in the control of the train should the driver not react appropriately. Before the derailment, there was no requirement for the co-driver to call-out critical speed limit changes, nor prohibit the co-driver from leaving the drivers' cabin to, say, prepare beverages in the adjacent area.
The weather condition in the area was fine, wind was low, and the temperature was 24.5 °C (76.1 °F). The moon had set at 7:23 pm, over four hours earlier, and was 26° below the horizon, meaning that while visibility was good, the area the train was operating was in complete darkness. With the exception of the illumination given by the train's headlights, this darkness exposed a weakness in another of the train's protection methods – drivers having knowledge and competence of the route they operate in – as landmarks cannot be seen and drivers' field of view
Field of view
The field of view is the extent of the observable world that is seen at any given moment....
is reduced and their spatial awareness compromised.
Aftermath
Damage caused by the derailment of the City of Townsville was significant. About 120 m (393.7 ft) of track and sleepers was damaged, and three stanchions supporting the electrified overhead power linesOverhead lines
Overhead lines or overhead wires are used to transmit electrical energy to trams, trolleybuses or trains at a distance from the energy supply point...
and associated wiring were destroyed had to be replaced. The total cost of the incident, including subsequent investigation, was estimated to be A$
Australian dollar
The Australian dollar is the currency of the Commonwealth of Australia, including Christmas Island, Cocos Islands, and Norfolk Island, as well as the independent Pacific Island states of Kiribati, Nauru and Tuvalu...
35.5 million.
Repairs to the track were completed on 20 November 2004, five days after the derailment. All tilt trains were limited to a maximum operational speed of 100 km/h (62.1 mph) throughout the state, and resumed higher running speeds on 15 June 2007 after owner and operator QR had implemented a series of safety recommendations from the investigations including fitting the fleet with Automatic Train Protection
Automatic Train Protection
Automatic Train Protection in Great Britain refers to either of two implementations of a train protection system installed in some trains in order to help prevent collisions through a driver's failure to observe a signal or speed restriction...
that would automatically slow or stop the train if the driver has not responded to or ignored warnings of a stop signal ahead or a curve speed restriction.
The derailed Diesel Tilt Train #VCQ5 sustained a considerable amount of damage and some needed structural repairs. Thirty EDI Rail trade staff and twenty support staff from Korea
Korea
Korea ) is an East Asian geographic region that is currently divided into two separate sovereign states — North Korea and South Korea. Located on the Korean Peninsula, Korea is bordered by the People's Republic of China to the northwest, Russia to the northeast, and is separated from Japan to the...
, Holland, Japan
Japan
Japan is an island nation in East Asia. Located in the Pacific Ocean, it lies to the east of the Sea of Japan, China, North Korea, South Korea and Russia, stretching from the Sea of Okhotsk in the north to the East China Sea and Taiwan in the south...
and Germany
Germany
Germany , officially the Federal Republic of Germany , is a federal parliamentary republic in Europe. The country consists of 16 states while the capital and largest city is Berlin. Germany covers an area of 357,021 km2 and has a largely temperate seasonal climate...
worked on repairs estimated to cost A$30 million.
The City of Townsville was fully repaired by its manufacturer, Downer EDI Rail in Maryborough
Maryborough, Queensland
Maryborough is a city located on the Mary River in South East Queensland, Australia, approximately north of the state capital, Brisbane. The city is serviced by the Bruce Highway, and has a population of approximately 22,000 . It is closely tied to its neighbour city Hervey Bay which is...
, and returned to service.