DBAG Class 101
Encyclopedia
DBAG Class 101 is a class of three-phase electric locomotive
s built by Adtranz
and operated by DB Fernverkehr
in Germany
. 145 locomotives were built between 1996 and 1999 to replace the 30-year old and aging Class 103
as the flagship of DB AG. This class encompasses the latest generation of locomotives of the DB.
In the United States
, the ALP-46
locomotive is derived from the DBAG Class 101. Bombardier
's TRAXX
shares a common heritage.
In the early 1990s
it became apparent that the current electric locomotives serving the heavy and fast (speeds over 160 km/h) InterCity service, the Class 103
, were wearing out. The annual mileage of the class 103 locomotives of up to 350,000 km, and the faster and heavier trains, for which these units were not constructed, meant increasing damage to the control units, traction motors, and bogie frames. In addition, as part of the Program DB 90, and to optimise costs, the theory of "Drive to Deterioration" (Fahren auf Verschleiß) was utilised, which strengthened the negative effect on the units.
Another class in similar service, the 60 units of the Class 120
three-phase locomotive, had also reached a stage where both their age and their construction meant ever increasing technical problems. Finally, there were 89 locomotives of the former East German class 112, capable of speeds up to 160 km/h, but these units were no longer contemporary, and were going to require expenditures in terms of cost of upkeep similar to the existing other classes in this service. In addition, this class was something of a political step child, and the DB wished for a truly new design along the lines of the three-phase class 120 locomotives.
In 1991 DB first requested that the firms in Germany's railway industry offer designs for new high-performance all-purpose locomotives, using the program name class 121. Designs for an all-purpose three-phase locomotive with output in excess of 6 megawatts (MW) and top speeds of 200 km/h were offered, which turned out to be much too expensive for the DB. In addition, due to the separation of services into different areas of operation, suddenly an all-purpose locomotive was no longer required.
In December 1989 a second, Europe-wide bidding process was initiated, allowing the bidding companies more room for their own ideas. Over 30 designs were offered, from below 5 MW to over 6 MW output, including powered head units (Triebkopf) and units with only one driver's cab (similar to the E464, in service today in Italy
). The latter idea was not pursued by DB, since it proved too inflexible in service trials, and the price difference turned out to be minimal.
The non-German firms Skoda
, Ansaldo und GEC-Alsthom were eliminated at an early stage from the contest, as the local construction methods and achievements of existing units did not find favour with the DB. On the other hand, German firms Siemens
, AEG
, and ADtranz
were able to shine with their designs utilising modular construction of locomotives, which were customisable to the requirements of different customers, and showed many common elements amongst each module.
Siemens
and Krauss-Maffei
already had a prototype
of the Eurosprinter
, class 127, in service, and AEG
Schienenfahrzeugtechnik was able to very quickly present a working demonstration prototype of their concept 12X, the future 128 001
. ABB Henschel had no modern prototypes, but only a concept named Eco2000, and a technology demonstration based on two already 15-year old rebuilt Class 120
locomotives.
To develop the components for the Eco2001, ABB Henschel used two Class 120 prototype locomotives, 120 004 and 005, which had been converted by ABB in 1992, in order to test new technologies in practice. 120 005 received new electric power converters based on GTO-Thyristor
s, as well as new on-board electronics. 120 004 additionally received flexi-float bogies adapted from ICE
units with driving rods instead of pivot pins, disc brakes, and it utilised a new biodegradable polyol
-ester
cooling agent for its main transformer. Both of these reconfigured locomotives covered large distances in regular IC service without disruption.
To the surprise of many observers, in December 1994 DB signed a Letter of Intent with ABB Henschel, which resulted in the firm order of 145 locomotives on 28 July 1995. The first class 101 locomotive was ceremonially presented on 1 July 1996. This unit, as was the case for the first three locomotives of this class, carried the orient red colour scheme. ABB Henschel had by this time merged with AEG
Schienenfahrzeugtechnik to become ADtranz
, and some of the bodies were now being built at the Hennigsdorf factory, while others were built in Kassel
. The bodies that were manufactured in Hennigsdorf were transported by flat bed trucks via the Autobahn to Kassel, where they were attached to the bogies built in Wrocław in Poland, and were also otherwise equipped to be ready for service. On 19 February 1997, the first class 101 locomotive was officially put into service.
nrnberghbf.jpg)
The class 101 locomotives initially stand out due to an unusually large slope at the front and back. The body had to be both as aerodynamic as possible, and at the same time be as cost-effective as possible. For these reasons the designers passed on a front with multiple curved areas. Further tapering of the front was also rejected, as this would have meant increasing the distance between locomotive and coaches, in cases where the two were separate. This would have negated the advantage of a more pointed front, due to the air turbulence created in the space between the vehicles.
In order to build support structures for the undercarriage, massive C-sections were welded together with steel plate of various strength in Hennigsdorf and in the ADtranz plant in Wrocław. The buffers at either side of the front are designed to withstand pressures up to 1000 kN, while the front part under the top windows can handle pressure up 7000 kN.
The front of the driver's cabs are made from 4 mm thick steel plate. The front window panes can be utilised on either side of the locomotive, and are simply glued into the body without window frame. The roof of the driver's cab is part of the body, not the roof. The four doors on the sides lead directly into the driver's cabs and are made of light alloy.
The side windows in the driver's cab in the class 101 featured swiveled windows, in order to avoid a window well, which often proved to be susceptible to corrosion (the windows in class 145 and 152
were continued to be counter-sunk). All windows and doors are completely pressurised due to the use of a special sealant section.
The body side panels are 3 mm thick, and are carried by columnar sections, in between which parts of the cabling channels are laid. The side panels encompass the area from the back end of the driver's cabs up to the beginning of the sloped roof section, which is part of the removable roof sections. They end toward the top in a hollow section, which then takes on the roof sections. The side panels are connected together by two welded wicket/belt made up of steel plate.
The roof is made of aluminum and is made up of three separate sections. The fan grills and roof slope area belong to the roof sections, and can be removed as part of the roof, making the entire width of the body available for work on the machinery inside. The roof sections are resting on the side panels, their connecting belts, and the fixed roofs of the driver's cabs, and a floating seal is built into the sections. The roof sections are completely flat for aerodynamic reasons, with the exception of the pantographs
, the signal horns
, and the antenna for radio
communication.
Since everything on the roof is mounted just a little under the top edge of the roof of the driver's cab, almost nothing catches any wind—even a lowered pantograph is difficult to detect. In comparison to other German locomotives, the pantographs are mounted "the wrong way around"—the hinges are pointing inwards. This is also for aerodynamic reasons—since the pantograph rocker needs to be located above the center of the bogies, the pantographs would have protruded into the raised roof of the driver's cab.
A special feature in class 101 units are the bogie side frame covers. They are mounted alongside the frame and cover the area down to the wheel bearings.
and Henschel aimed to develop bogies for the class 101 that would allow for the maximum possible latitude for future evolution. Therefore the bogies were designed for top speeds of 250 km/h and are derived directly from the ICE design, even though the locomotives of class 101 were only capable of maximum speeds of 220 km/h. In addition, the bogies were designed to be able to support the wheel set of other gauges. It is also possible to install a radially adjustable axle, such as is in service in class 460 of the SBB
(Swiss Railways), but the DB elected to go without this option.
Notwithstanding that the class 101 bogies are redeveloped from bogies on ICE trains, there are significant differences in their operation. The bogies of class 101 units make a compact impression, while the bogies on the ICE trains do not seem quite as compressed. The reason for this is that the bogies for the class 101 locomotives needed to be designed for both high speed stability and good performance in tight curves. This necessitated the use of a shorter wheelbase and large wheels. The bogies in the ICE trains did not need to take into account some of the tight curves that the class 101 trains need to handle. Specifically, the wheelbase was reduced from 3,000 mm in the ICE to 2,650 mm for the class 101 units.
Using these compact bogies resulted in such a significant decrease in the relative movement between body and bogies, and it became possible to run the connecting cables to the motor outside of the ventilation ducts. This simplified the construction and resulted in a longer life cycle.
The bogies consist of the two lateral main beams, and the two cross beams at each end; there is no middle welded cross beam. The transfer of pulling and braking power from bogie to locomotive takes place via two rods, which connect the locomotive via pivot pin to the bogie. The pivot pins are mounted with a slight slant to enable the formation of a right angle to the also slightly slanted rods. The rods are spring mounted at about 40 mm to the pivot pin, so that the movement of the bogie could be balanced.
The hollow axles, made from a chrome-molybdenum alloy, carry the massive wheels and the wheel set bearings at each end. The wheels are the typical German size, 1,250 mm, with a minimum of 1,170 mm after wear. The axles are mounted via hollow shafts into the gearbox casing, which, together with the traction motor, are designated the "integrated common drive train", or IGA. Both the manufacturer and the DB were thereby hoping for greatly reduced maintenance costs, with its outstanding (and in 120 004 proven) oil leak tightness, which is also to the benefit of greater environmental protection.
The power transmission to the axle and shaft takes place via a universal joint (also known as a Hooke's joint or Cardan joint) with rubber elements. The two wheels of each bogie are attached with six very large bolts, which are visible from the platform.
is used, and the traction motor serves as the generator. The cooperation between disc brakes and regenerative brakes is controlled by a dedicated brake control computer.
Each wheel has its own brake cylinder, and each wheel set also features an additional brake cylinder for the spring brake, which operates as the hand brake/parking brake and can secure locomotive at up to 4 percent incline.
The traction motors, which are designed to be without housing, can reach top speeds of 220 km/h at a maximum of 3,810 revolutions per minute; the gear ratio of 3.95 prevents revolutions over 4,000/min. Maximum output is 1,683 kW; the torque moves at 4.22 kN·m. The traction motor blowers are controlled by built-in sensors, and are powered by an electrical auxiliary inverter. The cooling air is transported in a closed air duct, which keeps the engine room clean. This cooling air flows into the traction motor via flexible bellows, moves through the "integrated common drive train", and is exhausted via openings in the gear box. A maximum of 2.1 cubic meters of air per second are conveyed by each blower, of which half a cubic meter is conveyed into the engine room. Each traction motor weighs 2,186 kg, and the entire bogie weighs in at about 17 tonnes.
On the hollow shafts there are two ventilated disc brakes, for which there is enough room due to the missing cross beam and pivot pin, as mentioned above. The disc brakes are separate and are ventilated from the inside. They can be serviced or replaced from below, without needing to take out the entire axle. During regular braking, primarily the regenerative brake
is used, and the traction motor serves as the generator. The cooperation between disc brakes and regenerative brakes is controlled by a dedicated brake control computer.
Each wheel has its own brake cylinder, and each wheel set also features an additional brake cylinder for the spring brake, which operates as the hand brake/parking brake and can secure locomotive at up to 4 percent incline.
The entire traction drive is mounted on an assisting beam in the center of the bogie, and attached to the outer sides via two pendulums. It is possible to mount in the center, since the bogies do not have pivot pins; the bogie is propped up above the frame by eight flexicoil springs. The resulting freedom of movement in all directions is limited by hydraulic buffers and rubber elements. By utilising this flexicoil suspension
, many components, which either wore out or had to be expensively maintained, were eliminated.
In cases where there is not enough air available at locomotive start-up, even though the system features an automatically operated shut-off valve at locomotive shut-down, it is possible to supply air to the pantographs and main switch with a battery-powered auxiliary compressor, up to a pressure of 7 bar.
The compressed air system supplies the following components:
Sand distribution system
To increase the transfer of train and brake power from the wheels to the rails, the locomotive can disperse sand onto the rails. The sand is stored in eight containers, one per wheel, on the undercarriage. When activated by the driver, compressed air is sent through the sand metering system, and sand is blown through downspouts to the front of the forward wheels in the direction of travel. At temperatures lower than 5 Celsius, this system is heated, and the sand is regularly mixed inside the containers.
Flange oilers
In order to conserve the wheel flange, a biodegradable fat/oil is automatically sprayed via compressed air into the channel between wheel flange and wheel surface of the front wheel, based on the current speed.
Train whistles
On the roof of the each driver's cab are two whistles, which produce warning sounds of 370 and 660 Hz. These whistles are activated via a pressure valve located on the floor of the cab near the driver's feet, or via pneumatic pushbuttons located around the driver's cab.
, and built in Berlin-Hennigsdorf. Today, the firm Stemman-Technik GmbH in Schüttdorf are manufacturing and distributing these units. They weight 270 kg.
The pantographs are screw-mounted to the roof at three points. Pantograph 1 is connected directly through the roof to the main control switch in the engine room; pantograph 2 is connected via a cable splice running along the side wall of the engine room to the main switch. The contact shoes are outfitted with a monitoring system in case of contact shoe breakage. Inside of the contact shoe, which is made of graphite, runs an air channel, which is overpressurised. In case of breakage, the air escapes, causing the pantograph to automatically retract, preventing possible damage to the overhead contact wire.
The pantographs are raised using compressed air, which is provided at 5 bar to the lifting cylinder. Raising the pantograph takes 5 seconds, while retraction takes 4 seconds. The contact shoe pushes against the contact wire with adjustable pressure of between 70 and 120 N. The driver controls the pantograph via a push button on the driver's desk (Up, Down, and Down + Sanding for emergency cases are the settings). The choice of which pantograph to use can be left up to the locomotive by the driver, which would automatically use the back pantograph in the direction of travel, or, in double heading, where two locomotives are coupled, it would be the front pantograph on the front locomotive, and the back pantograph on the back locomotive. Otherwise the driver, using a switch located on the battery control table in driver's cab 1, may raise one or the other, or both together. This is primarily an advantage during shunting/switching operation, where otherwise the change from one driver's cab to the other would mean the automatic switching from one pantograph to the other. In cases where the pantograph is being switched, the unit that was in the down position is lifted first, and once it is successfully pushed up against the contact wire, the pantograph that was in service is lowered.
The compressed air for the lifting and lowering of the pantograph, as well as for the contact shoe monitoring system, are supplied via two teflon-coated hoses on the roof, which have to withstand the 15,000 volts of contact wire voltage.
The transformer features seven electric coils:
The transformer is cooled by a cooling agent made of a polyol-ester mix, which is recirculated by two independent canned motor pumps; these pumps make the occurrence of leaks almost impossible. Each pump can be sealed off separately, and can therefore be easily replaced. In cases where one pump fails, the cooling agent remains in the transformer tank; the transformer is capable of providing power at 65% of full capacity with just one pump in operation.
The class 101 units feature the automatic drive and brake control system (AFB, or Automatische Fahr- und Bremssteuerung), which assists the driver and enables the best possible acceleration and braking under all possible conditions. The AFB can also keep the locomotive at a constant speed.
Class 101 also was outfitted with the Superschlupfregelung, which controls the maximum number of rotations of the wheels per minute, and can automatically limit the rotations in order to avoid damage to the wheel surface or it can switch on the sand. This enables the maximization of the functional grip between wheel and rail. This system requires very precise information on the current speed, which resulted in the installation of a radar system into the floor of the locomotive, which sends the required speed data to the computer system. It turned out that the radar was unnecessary, and that this control system functions well without the data provided by the radar.
The locomotives also feature the ABB-developed computerized 16-bit control system MICAS S. The control, monitoring, and diagnosis of the vehicle is done by a bus system. This type of system meant a large reduction in the amount of wiring, especially as compared to the class 120; much of the wiring is accommodated in the side walls of the body.
The central control unit (ZSG), which is at the core of the system, is present twice for redundancy. All data that is collected by the various onboard systems is sent to the ZSG for processing, and all commands that affect the vehicle are originated by the ZSG.
The ZSG consists of 4 processors, which monitor the train controls and safety systems, including the dead man's system. The safety system also includes the PZB 90, which enforces the adherence to signals and other regulations (i.e. approach to a stop signal at high speed, violations of prescribed speed) and may stop the train via emergency braking if necessary. Yet another safety system is the LZB 80, which keeps the train in constant contact with a central control point, where all trains on a line are monitored for location and speed. In the locomotives 101 140 to 144 the European Train Control System (ETCS) is being tested, which serves similar functions are just described, but is meant to do so on a Europe-wide basis.
Also included in the control systems is the electronic time table EBuLa, which assists in the tracking of scheduled times, speeds, temporary speed restrictions, and other irregularities on the line which is installed on every train of the DB AG.
The diagnostic system DAVID was also further developed from the ICE version in class 101. This system enables the monitoring and diagnosis of failures, and delivers possible solutions in real time to the driver and the maintenance depot. In addition, maintenance times are shortened, since the maintenance area can prepare for issues already identified by querying the system at any time, as opposed to just at certain points in the network, as is the case for the ICE version of this system.
am Main. The locomotive changes made necessary there by its terminus-type station would allow for the ideal alignment of running schedules and maintenance work of these locomotives.
It then turned out that, due to the ever-increasing number of ICE trains with control cars arriving in Frankfurt, the DB decision to only run push-pull-type trains into Frankfurt station, and the necessary high investment to create a new high-tech train depot at the station, this plan was reevaluated. At the same time, spare capacity was created at the well-regarded ICE depot in Hamburg
-Eidelstedt, since the depot there was built to hold 14-center-carriage ICE trains, and only 12 center carriages were being used. This spare capacity would now be used for the maintenance of the class 101 units.
During the first years in this depot, the manufacturer ADtranz
, in order to fulfill their warranty obligations, housed a team of 15 employees in Hamburg-Eidelstedt. In 2002 there were still 2 ADtranz representatives present.
Basing the class 101 locomotives in Hamburg still seemed more cost-efficient to the DB than the construction of a new depot somewhere else, even though it meant the hiring of new drivers in Hamburg for the sometimes complicated, but necessary shunting/switching work. The base at a relative "outpost" in the far north of Germany also created problems with the service scheduling of the units.
Every 100,000 km, the class 101 locomotives are sent to Hamburg for their periodic maintenance check (Frist), where minor technical issues are addressed. This depot also features an underfloor lathe for the reprofiling of the axles. The locomotives were sent to the main railway workshop (Ausbesserungswerk, or AW) in Nuremberg
for major maintenance during the first years; because of capacity issues at this AW, they sometimes were sent to the manufacturer in Kassel
instead. Currently, the AW in Dessau is responsible for the major maintenance work on class 101 units.
", and this campaign was followed by similar efforts from firms such as Bayer
, CMA
, and the German state of Baden-Württemberg
. The DB also used their own locomotives to advertise their new pricing system. The adverts are printed onto heavy plastic foil, which is then glued to the body of the locomotive - there is no painting involved. Please refer to the web site Baureihe-101.de for a complete listing of all advertisements on each class 101 unit.
to Basel
. In Emmerich, a German-Dutch border town on the Rhine, the driver of this locomotive took charge of the train.
Shortly after Cologne
, in Hürth-Karlscheuren, the driver slowed the train per signal command to 60 km/h, due to a line switch necessitated by line construction work on the track that D203 was presently using. The train passed several switches and was running on the left-hand track. The driver correctly accelerated, as the track was approved for a speed of 130 km/h. D203 approached the station entry signal to Brühl station at around 100 km/h. The distant signal (Vorsignal) indicated an "Expect Stop" signal, and the driver decelerated the train.
The station entry signal, which was set to Stop, is superseded by a Zs-1 subsidiary signal, which permits continuing travel at 40 km/h. This subsidiary signal, because it is in relationship to a station entry signal, is valid only until the next main signal is reached, in this case the station exit signal. Therefore, the train should have traveled through Brühl station at 40 km/h.
However, D203 accelerated shortly after passing the subsidiary signal and passed the next switches at 120 km/h - in accordance with the speed advised in the printed "slow speed directive" (Langsamfahrstelle) for this spot, which each driver gets for each trip and which is located in the driver's cab, and in accordance with the signal given by the slow speed construction signal at the edge of the track. The automatic speed control done at all signals, normally done by the PZB 90 system, was not performed due to the construction in the immediate area. Once the construction works and speed restriction were passed, the driver accelerated. The train reached a set of points at a speed over 120 km/h (where it should have been traveling at 40 km/h), and derailed. The locomotive left the track and plowed toward houses at the side of the track, smashing into one. Several carriages tipped over, and some are wedged under the station roof. Nine people were killed, with an additional 149 persons injured, in some cases severely.
Initially the voices of blame for the inexperienced driver of D203 were almost unanimous. The 28-year old had twice failed the locomotive driver's test given by the DB, and had then found work at a private rail transport firm, where, after passing the driver's test, he had primarily driven locomotives involved in switching work. He had then rejoined the DB, and after completing a short retraining regiment, was permitted to also operate fast passenger trains.
As time passed, however, doubt began to grow about the exclusive fault of the driver. Other drivers have complained about the condition at Brühl station, in particular about the shortage, and confusing arrangement, of signs and signals in the construction area. In addition, the printed "slow speed directive" did, in fact, have directions for a speed of 120 km/h for that track in that spot, but which were meant only for the opposite direction. Signs for a maximum speed of 120 km/h were also found in the area. The driver of D203 made one very serious error, which his complaining colleagues had not made: The alternate signal for 40 km/h, by the station entry signal, had precedence over any other directives - had he followed that signal, nothing would have happened.
It turned out that the DB was aware, prior to the accident
, of the confusing nature of the directives in the area. One week prior to the start of construction, 3 DB employees, in charge of traffic, construction, and the publishing of the "slow speed directive", had discussed the possibility of confusion in the interpretation of the signals. It became clear that the speed of 120 km/h was only valid for the track on the right, in the direction of Koblenz to Cologne. While traveling in the opposite direction, trains had to switch to the left track in that direction of travel due to the construction, and it was decided that the local signs directing a speed of 40 km/h were sufficient, and the "slow speed directive" did not need to be corrected and republished. Further, it was decided that the station inspector would contact the driver of each train to inform the driver of the situation. In fact, the directive for the station inspector to contact the driver was given, but was not made mandatory; also, the wireless communications were disrupted on the day of the accident.
The driver and the 3 DB employees were arraigned for causing death and injury due to negligence. The driver was found guilty of ignoring signals, and the 3 DB employees were found guilty for not installing the automatic high speed warning system, and for not clearing up the confusing directives. In October 2001, monetary damages between €
7,000 and 20,000 were handed down.
Electric locomotive
An electric locomotive is a locomotive powered by electricity from overhead lines, a third rail or an on-board energy storage device...
s built by Adtranz
Adtranz
ABB Daimler-Benz Transportation , commonly known under its brand Adtranz, was a multi-national rail transport equipment manufacturer with facilities concentrated in Europe and the USA....
and operated by DB Fernverkehr
DB Fernverkehr
DB Fernverkehr AG is a semi-independent division of Deutsche Bahn that operates long-distance passenger trains in Germany. It was founded in 1999 in the second stage of the privatisation of German Federal Railways under the name of DB Reise&Touristik and renamed in 2003.DB Fernverkehr operates all...
in Germany
Germany
Germany , officially the Federal Republic of Germany , is a federal parliamentary republic in Europe. The country consists of 16 states while the capital and largest city is Berlin. Germany covers an area of 357,021 km2 and has a largely temperate seasonal climate...
. 145 locomotives were built between 1996 and 1999 to replace the 30-year old and aging Class 103
DB Class 103
The Baureihe 103 is a class of electric locomotives in Germany, originally operated by Deutsche Bundesbahn. For a long period, they were perceived as flagships of the DB rolling stock.- Development :...
as the flagship of DB AG. This class encompasses the latest generation of locomotives of the DB.
In the United States
United States
The United States of America is a federal constitutional republic comprising fifty states and a federal district...
, the ALP-46
ALP-46
The ALP-46 is an electric locomotive built in Germany by Bombardier between 2001 and 2002 for use in the United States. It is derived from the German Class 101. New Jersey Transit is the only railroad to operate this model locomotive...
locomotive is derived from the DBAG Class 101. Bombardier
Bombardier Transportation
Bombardier Transportation is the rail equipment division of the Canadian firm, Bombardier Inc. Bombardier Transportation is one of the world's largest companies in the rail-equipment manufacturing and servicing industry. Its headquarters are in Berlin, Germany....
's TRAXX
TRAXX
Bombardier TRAXX is a modular product platform of electric and Diesel-electric mainline locomotives built by Bombardier Transportation, built in both freight and passenger variants...
shares a common heritage.
Background/Development history
1990s
File:1990s decade montage.png|From left, clockwise: The Hubble Space Telescope floats in space after it was taken up in 1990; American F-16s and F-15s fly over burning oil fields and the USA Lexie in Operation Desert Storm, also known as the 1991 Gulf War; The signing of the Oslo Accords on...
it became apparent that the current electric locomotives serving the heavy and fast (speeds over 160 km/h) InterCity service, the Class 103
DB Class 103
The Baureihe 103 is a class of electric locomotives in Germany, originally operated by Deutsche Bundesbahn. For a long period, they were perceived as flagships of the DB rolling stock.- Development :...
, were wearing out. The annual mileage of the class 103 locomotives of up to 350,000 km, and the faster and heavier trains, for which these units were not constructed, meant increasing damage to the control units, traction motors, and bogie frames. In addition, as part of the Program DB 90, and to optimise costs, the theory of "Drive to Deterioration" (Fahren auf Verschleiß) was utilised, which strengthened the negative effect on the units.
Another class in similar service, the 60 units of the Class 120
DB Class 120
The DB Baureihe 120 is a class of electric locomotives operated by DB Fernverkehr in Germany.-Background and design:The locomotives' prototypes, delivered in 1979 , were one of the first electric locomotives with three-phase motors. They were based on experiences made in the 1970s with...
three-phase locomotive, had also reached a stage where both their age and their construction meant ever increasing technical problems. Finally, there were 89 locomotives of the former East German class 112, capable of speeds up to 160 km/h, but these units were no longer contemporary, and were going to require expenditures in terms of cost of upkeep similar to the existing other classes in this service. In addition, this class was something of a political step child, and the DB wished for a truly new design along the lines of the three-phase class 120 locomotives.
In 1991 DB first requested that the firms in Germany's railway industry offer designs for new high-performance all-purpose locomotives, using the program name class 121. Designs for an all-purpose three-phase locomotive with output in excess of 6 megawatts (MW) and top speeds of 200 km/h were offered, which turned out to be much too expensive for the DB. In addition, due to the separation of services into different areas of operation, suddenly an all-purpose locomotive was no longer required.
In December 1989 a second, Europe-wide bidding process was initiated, allowing the bidding companies more room for their own ideas. Over 30 designs were offered, from below 5 MW to over 6 MW output, including powered head units (Triebkopf) and units with only one driver's cab (similar to the E464, in service today in Italy
Italy
Italy , officially the Italian Republic languages]] under the European Charter for Regional or Minority Languages. In each of these, Italy's official name is as follows:;;;;;;;;), is a unitary parliamentary republic in South-Central Europe. To the north it borders France, Switzerland, Austria and...
). The latter idea was not pursued by DB, since it proved too inflexible in service trials, and the price difference turned out to be minimal.
The non-German firms Skoda
Škoda Works
Škoda Works was the largest industrial enterprise in Austro-Hungary and later in Czechoslovakia, one of its successor states. It was also one of the largest industrial conglomerates in Europe in the 20th century...
, Ansaldo und GEC-Alsthom were eliminated at an early stage from the contest, as the local construction methods and achievements of existing units did not find favour with the DB. On the other hand, German firms Siemens
Siemens AG
Siemens AG is a German multinational conglomerate company headquartered in Munich, Germany. It is the largest Europe-based electronics and electrical engineering company....
, AEG
AEG
Allgemeine Elektricitäts-Gesellschaft was a German producer of electrical equipment founded in 1883 by Emil Rathenau....
, and ADtranz
Adtranz
ABB Daimler-Benz Transportation , commonly known under its brand Adtranz, was a multi-national rail transport equipment manufacturer with facilities concentrated in Europe and the USA....
were able to shine with their designs utilising modular construction of locomotives, which were customisable to the requirements of different customers, and showed many common elements amongst each module.
Siemens AG
Siemens AG is a German multinational conglomerate company headquartered in Munich, Germany. It is the largest Europe-based electronics and electrical engineering company....
and Krauss-Maffei
Krauss-Maffei
The Krauss-Maffei Wegmann GmbH & Co KG or simply Krauss-Maffei is an injection molding machine manufacturer and defence company based in Munich, Germany...
already had a prototype
Prototype
A prototype is an early sample or model built to test a concept or process or to act as a thing to be replicated or learned from.The word prototype derives from the Greek πρωτότυπον , "primitive form", neutral of πρωτότυπος , "original, primitive", from πρῶτος , "first" and τύπος ,...
of the Eurosprinter
EuroSprinter
The EuroSprinter family of electric locomotives is a modular concept of locomotives for the European market built by Siemens. The internal Siemens product name is ES 64, with ES for EuroSprinter and the number 64 indicating the 6,400 kW power at rail.Additional information is given in the name...
, class 127, in service, and AEG
AEG
Allgemeine Elektricitäts-Gesellschaft was a German producer of electrical equipment founded in 1883 by Emil Rathenau....
Schienenfahrzeugtechnik was able to very quickly present a working demonstration prototype of their concept 12X, the future 128 001
DBAG Class 128
128 001, as registered at Deutsche Bahn, or 12X, as named by its manufacturer AEG Schienenfahrzeuge and its successive owners ADtranz and Bombardier Transportation, is an experimental high-performance electric locomotive built in 1994, which was operated as testbed and test locomotive until 2010...
. ABB Henschel had no modern prototypes, but only a concept named Eco2000, and a technology demonstration based on two already 15-year old rebuilt Class 120
DB Class 120
The DB Baureihe 120 is a class of electric locomotives operated by DB Fernverkehr in Germany.-Background and design:The locomotives' prototypes, delivered in 1979 , were one of the first electric locomotives with three-phase motors. They were based on experiences made in the 1970s with...
locomotives.
To develop the components for the Eco2001, ABB Henschel used two Class 120 prototype locomotives, 120 004 and 005, which had been converted by ABB in 1992, in order to test new technologies in practice. 120 005 received new electric power converters based on GTO-Thyristor
Thyristor
A thyristor is a solid-state semiconductor device with four layers of alternating N and P-type material. They act as bistable switches, conducting when their gate receives a current trigger, and continue to conduct while they are forward biased .Some sources define silicon controlled rectifiers and...
s, as well as new on-board electronics. 120 004 additionally received flexi-float bogies adapted from ICE
InterCityExpress
The Intercity-Express or ICE is a system of high-speed trains predominantly running in Germany and neighbouring countries. It is the highest service category offered by DB Fernverkehr and is the flagship of Deutsche Bahn...
units with driving rods instead of pivot pins, disc brakes, and it utilised a new biodegradable polyol
Polyol
A polyol is an alcohol containing multiple hydroxyl groups. In two technological disciplines the term "polyol" has a special meaning: food science and polymer chemistry.- Polyols in food science :...
-ester
Ester
Esters are chemical compounds derived by reacting an oxoacid with a hydroxyl compound such as an alcohol or phenol. Esters are usually derived from an inorganic acid or organic acid in which at least one -OH group is replaced by an -O-alkyl group, and most commonly from carboxylic acids and...
cooling agent for its main transformer. Both of these reconfigured locomotives covered large distances in regular IC service without disruption.
To the surprise of many observers, in December 1994 DB signed a Letter of Intent with ABB Henschel, which resulted in the firm order of 145 locomotives on 28 July 1995. The first class 101 locomotive was ceremonially presented on 1 July 1996. This unit, as was the case for the first three locomotives of this class, carried the orient red colour scheme. ABB Henschel had by this time merged with AEG
AEG
Allgemeine Elektricitäts-Gesellschaft was a German producer of electrical equipment founded in 1883 by Emil Rathenau....
Schienenfahrzeugtechnik to become ADtranz
Adtranz
ABB Daimler-Benz Transportation , commonly known under its brand Adtranz, was a multi-national rail transport equipment manufacturer with facilities concentrated in Europe and the USA....
, and some of the bodies were now being built at the Hennigsdorf factory, while others were built in Kassel
Kassel
Kassel is a town located on the Fulda River in northern Hesse, Germany. It is the administrative seat of the Kassel Regierungsbezirk and the Kreis of the same name and has approximately 195,000 inhabitants.- History :...
. The bodies that were manufactured in Hennigsdorf were transported by flat bed trucks via the Autobahn to Kassel, where they were attached to the bogies built in Wrocław in Poland, and were also otherwise equipped to be ready for service. On 19 February 1997, the first class 101 locomotive was officially put into service.
Body Design
In order to build support structures for the undercarriage, massive C-sections were welded together with steel plate of various strength in Hennigsdorf and in the ADtranz plant in Wrocław. The buffers at either side of the front are designed to withstand pressures up to 1000 kN, while the front part under the top windows can handle pressure up 7000 kN.
The front of the driver's cabs are made from 4 mm thick steel plate. The front window panes can be utilised on either side of the locomotive, and are simply glued into the body without window frame. The roof of the driver's cab is part of the body, not the roof. The four doors on the sides lead directly into the driver's cabs and are made of light alloy.
The side windows in the driver's cab in the class 101 featured swiveled windows, in order to avoid a window well, which often proved to be susceptible to corrosion (the windows in class 145 and 152
152
Year 152 was a leap year starting on Friday of the Julian calendar. At the time, it was known as the Year of the Consulship of Glabrio and Homullus...
were continued to be counter-sunk). All windows and doors are completely pressurised due to the use of a special sealant section.
The body side panels are 3 mm thick, and are carried by columnar sections, in between which parts of the cabling channels are laid. The side panels encompass the area from the back end of the driver's cabs up to the beginning of the sloped roof section, which is part of the removable roof sections. They end toward the top in a hollow section, which then takes on the roof sections. The side panels are connected together by two welded wicket/belt made up of steel plate.
The roof is made of aluminum and is made up of three separate sections. The fan grills and roof slope area belong to the roof sections, and can be removed as part of the roof, making the entire width of the body available for work on the machinery inside. The roof sections are resting on the side panels, their connecting belts, and the fixed roofs of the driver's cabs, and a floating seal is built into the sections. The roof sections are completely flat for aerodynamic reasons, with the exception of the pantographs
Pantograph (rail)
A pantograph for rail lines is a hinged electric-rod device that collects electric current from overhead lines for electric trains or trams. The pantograph typically connects to a one-wire line, with the track acting as the ground wire...
, the signal horns
Train horn
Train horns are audible warning devices found on most diesel and electric locomotives. Their primary purpose is to alert persons and animals to the presence of a train, especially when approaching a grade crossing. They are also used for acknowledging signals given by railroad employees Train horns...
, and the antenna for radio
Radio
Radio is the transmission of signals through free space by modulation of electromagnetic waves with frequencies below those of visible light. Electromagnetic radiation travels by means of oscillating electromagnetic fields that pass through the air and the vacuum of space...
communication.
Since everything on the roof is mounted just a little under the top edge of the roof of the driver's cab, almost nothing catches any wind—even a lowered pantograph is difficult to detect. In comparison to other German locomotives, the pantographs are mounted "the wrong way around"—the hinges are pointing inwards. This is also for aerodynamic reasons—since the pantograph rocker needs to be located above the center of the bogies, the pantographs would have protruded into the raised roof of the driver's cab.
A special feature in class 101 units are the bogie side frame covers. They are mounted alongside the frame and cover the area down to the wheel bearings.
Bogies/trucks
ADtranzAdtranz
ABB Daimler-Benz Transportation , commonly known under its brand Adtranz, was a multi-national rail transport equipment manufacturer with facilities concentrated in Europe and the USA....
and Henschel aimed to develop bogies for the class 101 that would allow for the maximum possible latitude for future evolution. Therefore the bogies were designed for top speeds of 250 km/h and are derived directly from the ICE design, even though the locomotives of class 101 were only capable of maximum speeds of 220 km/h. In addition, the bogies were designed to be able to support the wheel set of other gauges. It is also possible to install a radially adjustable axle, such as is in service in class 460 of the SBB
SBB-CFF-FFS
Swiss Federal Railways and SFR are not in official use) is the national railway company of Switzerland headquartered in Bern. Formerly a government institution, it is since 1999 a special stock corporation with all shares held by the Swiss Confederation or the Swiss cantons...
(Swiss Railways), but the DB elected to go without this option.
Notwithstanding that the class 101 bogies are redeveloped from bogies on ICE trains, there are significant differences in their operation. The bogies of class 101 units make a compact impression, while the bogies on the ICE trains do not seem quite as compressed. The reason for this is that the bogies for the class 101 locomotives needed to be designed for both high speed stability and good performance in tight curves. This necessitated the use of a shorter wheelbase and large wheels. The bogies in the ICE trains did not need to take into account some of the tight curves that the class 101 trains need to handle. Specifically, the wheelbase was reduced from 3,000 mm in the ICE to 2,650 mm for the class 101 units.
Using these compact bogies resulted in such a significant decrease in the relative movement between body and bogies, and it became possible to run the connecting cables to the motor outside of the ventilation ducts. This simplified the construction and resulted in a longer life cycle.
The bogies consist of the two lateral main beams, and the two cross beams at each end; there is no middle welded cross beam. The transfer of pulling and braking power from bogie to locomotive takes place via two rods, which connect the locomotive via pivot pin to the bogie. The pivot pins are mounted with a slight slant to enable the formation of a right angle to the also slightly slanted rods. The rods are spring mounted at about 40 mm to the pivot pin, so that the movement of the bogie could be balanced.
The hollow axles, made from a chrome-molybdenum alloy, carry the massive wheels and the wheel set bearings at each end. The wheels are the typical German size, 1,250 mm, with a minimum of 1,170 mm after wear. The axles are mounted via hollow shafts into the gearbox casing, which, together with the traction motor, are designated the "integrated common drive train", or IGA. Both the manufacturer and the DB were thereby hoping for greatly reduced maintenance costs, with its outstanding (and in 120 004 proven) oil leak tightness, which is also to the benefit of greater environmental protection.
The power transmission to the axle and shaft takes place via a universal joint (also known as a Hooke's joint or Cardan joint) with rubber elements. The two wheels of each bogie are attached with six very large bolts, which are visible from the platform.
Brake system and traction motors
On the hollow shafts there are two ventilated disc brakes, for which there is enough room due to the missing cross beam and pivot pin, as mentioned above. The disc brakes are separate and are ventilated from the inside. They can be serviced or replaced from below, without needing to take out the entire axle. During regular braking, primarily the regenerative brakeRegenerative brake
A regenerative brake is an energy recovery mechanism which slows a vehicle or object down by converting its kinetic energy into another form, which can be either used immediately or stored until needed...
is used, and the traction motor serves as the generator. The cooperation between disc brakes and regenerative brakes is controlled by a dedicated brake control computer.
Each wheel has its own brake cylinder, and each wheel set also features an additional brake cylinder for the spring brake, which operates as the hand brake/parking brake and can secure locomotive at up to 4 percent incline.
The traction motors, which are designed to be without housing, can reach top speeds of 220 km/h at a maximum of 3,810 revolutions per minute; the gear ratio of 3.95 prevents revolutions over 4,000/min. Maximum output is 1,683 kW; the torque moves at 4.22 kN·m. The traction motor blowers are controlled by built-in sensors, and are powered by an electrical auxiliary inverter. The cooling air is transported in a closed air duct, which keeps the engine room clean. This cooling air flows into the traction motor via flexible bellows, moves through the "integrated common drive train", and is exhausted via openings in the gear box. A maximum of 2.1 cubic meters of air per second are conveyed by each blower, of which half a cubic meter is conveyed into the engine room. Each traction motor weighs 2,186 kg, and the entire bogie weighs in at about 17 tonnes.
On the hollow shafts there are two ventilated disc brakes, for which there is enough room due to the missing cross beam and pivot pin, as mentioned above. The disc brakes are separate and are ventilated from the inside. They can be serviced or replaced from below, without needing to take out the entire axle. During regular braking, primarily the regenerative brake
Regenerative brake
A regenerative brake is an energy recovery mechanism which slows a vehicle or object down by converting its kinetic energy into another form, which can be either used immediately or stored until needed...
is used, and the traction motor serves as the generator. The cooperation between disc brakes and regenerative brakes is controlled by a dedicated brake control computer.
Each wheel has its own brake cylinder, and each wheel set also features an additional brake cylinder for the spring brake, which operates as the hand brake/parking brake and can secure locomotive at up to 4 percent incline.
The entire traction drive is mounted on an assisting beam in the center of the bogie, and attached to the outer sides via two pendulums. It is possible to mount in the center, since the bogies do not have pivot pins; the bogie is propped up above the frame by eight flexicoil springs. The resulting freedom of movement in all directions is limited by hydraulic buffers and rubber elements. By utilising this flexicoil suspension
Flexicoil suspension
Flexicoil suspension is a wear-resistant and maintenance-free suspension system, used in railway vehicles. It is a secondary suspension, installed between the body and the bogie of the locomotive, passenger car or wagon so fitted....
, many components, which either wore out or had to be expensively maintained, were eliminated.
Compressed air system
The compressed air system in the class 101 is similar to the system found in other locomotives. Via air intake in the engine room, air is suctioned through a filter, and is compressed by a screw-type compressor to a maximum of 10 bar. The compressor is controlled by a pressure control device and automatically turns on at 8.5 bar (850 kPa), then shuts off at 10 bar (1000 kPa. The compressed air is then conducted through an air conditioning unit and is stored in two 400-liter main air reservoirs. The entire system is protected against excess pressure by two safety valves, which kick in at 10.5 and 12 bar (1.05 and 1.2 MPa) pressure. The compressor is also individually monitored, and shuts off at oil temperatures above 110 degrees Celsius.In cases where there is not enough air available at locomotive start-up, even though the system features an automatically operated shut-off valve at locomotive shut-down, it is possible to supply air to the pantographs and main switch with a battery-powered auxiliary compressor, up to a pressure of 7 bar.
The compressed air system supplies the following components:
- brakes
- sand distributor
- flange oilers
- wind screen washer system
- train whistles
Sand distribution system
To increase the transfer of train and brake power from the wheels to the rails, the locomotive can disperse sand onto the rails. The sand is stored in eight containers, one per wheel, on the undercarriage. When activated by the driver, compressed air is sent through the sand metering system, and sand is blown through downspouts to the front of the forward wheels in the direction of travel. At temperatures lower than 5 Celsius, this system is heated, and the sand is regularly mixed inside the containers.
Flange oilers
In order to conserve the wheel flange, a biodegradable fat/oil is automatically sprayed via compressed air into the channel between wheel flange and wheel surface of the front wheel, based on the current speed.
Train whistles
On the roof of the each driver's cab are two whistles, which produce warning sounds of 370 and 660 Hz. These whistles are activated via a pressure valve located on the floor of the cab near the driver's feet, or via pneumatic pushbuttons located around the driver's cab.
Pantographs
The two pantographs of type DSA 350 SEK (recognisable as half-pantographs, as opposed to the diamond-shaped full pantographs) were originally developed by DornierDornier
Dornier may refer to:* Claudius Dornier , German aircraft designer and builder** Dornier Flugzeugwerke, German aircraft manufacturer founded in 1914 by Claudius Dornier* Dornier Consulting, international consulting and project management company...
, and built in Berlin-Hennigsdorf. Today, the firm Stemman-Technik GmbH in Schüttdorf are manufacturing and distributing these units. They weight 270 kg.
The pantographs are screw-mounted to the roof at three points. Pantograph 1 is connected directly through the roof to the main control switch in the engine room; pantograph 2 is connected via a cable splice running along the side wall of the engine room to the main switch. The contact shoes are outfitted with a monitoring system in case of contact shoe breakage. Inside of the contact shoe, which is made of graphite, runs an air channel, which is overpressurised. In case of breakage, the air escapes, causing the pantograph to automatically retract, preventing possible damage to the overhead contact wire.
The pantographs are raised using compressed air, which is provided at 5 bar to the lifting cylinder. Raising the pantograph takes 5 seconds, while retraction takes 4 seconds. The contact shoe pushes against the contact wire with adjustable pressure of between 70 and 120 N. The driver controls the pantograph via a push button on the driver's desk (Up, Down, and Down + Sanding for emergency cases are the settings). The choice of which pantograph to use can be left up to the locomotive by the driver, which would automatically use the back pantograph in the direction of travel, or, in double heading, where two locomotives are coupled, it would be the front pantograph on the front locomotive, and the back pantograph on the back locomotive. Otherwise the driver, using a switch located on the battery control table in driver's cab 1, may raise one or the other, or both together. This is primarily an advantage during shunting/switching operation, where otherwise the change from one driver's cab to the other would mean the automatic switching from one pantograph to the other. In cases where the pantograph is being switched, the unit that was in the down position is lifted first, and once it is successfully pushed up against the contact wire, the pantograph that was in service is lowered.
The compressed air for the lifting and lowering of the pantograph, as well as for the contact shoe monitoring system, are supplied via two teflon-coated hoses on the roof, which have to withstand the 15,000 volts of contact wire voltage.
Transformer
In contrast to locomotives of other classes, the transformer in class 101 is hung underneath the floor of the engine room on the frame, which enabled a very clean and uncluttered configuration of the engine room. This also caused the design of the transformer to be quite different from previous locomotives. The tank is constructed of light weight steel, but needed to be rugged enough to withstand a minor derailment or other accident; hence, some areas were reinforced with stronger welded sections.The transformer features seven electric coils:
- 4 coils for the supply of the power converters with 1,514 volts and 1.6 MVA
- 2 coils for the supply of the trainlines (which supplies power to all carriages for heating and cooling and other power needs) and disturbance current filters with 1,000 volts and 600 kVA
- 1 coil for the supply of the three auxiliary inverters with 315 volts and 180 kVA
- 1 coil for the supply of the battery charger, driver's cab heater and air conditioner, and pressure protection, with 203 volts and 20 kVA
The transformer is cooled by a cooling agent made of a polyol-ester mix, which is recirculated by two independent canned motor pumps; these pumps make the occurrence of leaks almost impossible. Each pump can be sealed off separately, and can therefore be easily replaced. In cases where one pump fails, the cooling agent remains in the transformer tank; the transformer is capable of providing power at 65% of full capacity with just one pump in operation.
Software and other control systems
Class 101 also was outfitted with the Superschlupfregelung, which controls the maximum number of rotations of the wheels per minute, and can automatically limit the rotations in order to avoid damage to the wheel surface or it can switch on the sand. This enables the maximization of the functional grip between wheel and rail. This system requires very precise information on the current speed, which resulted in the installation of a radar system into the floor of the locomotive, which sends the required speed data to the computer system. It turned out that the radar was unnecessary, and that this control system functions well without the data provided by the radar.
The locomotives also feature the ABB-developed computerized 16-bit control system MICAS S. The control, monitoring, and diagnosis of the vehicle is done by a bus system. This type of system meant a large reduction in the amount of wiring, especially as compared to the class 120; much of the wiring is accommodated in the side walls of the body.
The central control unit (ZSG), which is at the core of the system, is present twice for redundancy. All data that is collected by the various onboard systems is sent to the ZSG for processing, and all commands that affect the vehicle are originated by the ZSG.
The ZSG consists of 4 processors, which monitor the train controls and safety systems, including the dead man's system. The safety system also includes the PZB 90, which enforces the adherence to signals and other regulations (i.e. approach to a stop signal at high speed, violations of prescribed speed) and may stop the train via emergency braking if necessary. Yet another safety system is the LZB 80, which keeps the train in constant contact with a central control point, where all trains on a line are monitored for location and speed. In the locomotives 101 140 to 144 the European Train Control System (ETCS) is being tested, which serves similar functions are just described, but is meant to do so on a Europe-wide basis.
Also included in the control systems is the electronic time table EBuLa, which assists in the tracking of scheduled times, speeds, temporary speed restrictions, and other irregularities on the line which is installed on every train of the DB AG.
The diagnostic system DAVID was also further developed from the ICE version in class 101. This system enables the monitoring and diagnosis of failures, and delivers possible solutions in real time to the driver and the maintenance depot. In addition, maintenance times are shortened, since the maintenance area can prepare for issues already identified by querying the system at any time, as opposed to just at certain points in the network, as is the case for the ICE version of this system.
Deployment
The original plan called for the class 101 to be based in one of the main intercity traffic hubs in Germany, namely FrankfurtFrankfurt
Frankfurt am Main , commonly known simply as Frankfurt, is the largest city in the German state of Hesse and the fifth-largest city in Germany, with a 2010 population of 688,249. The urban area had an estimated population of 2,300,000 in 2010...
am Main. The locomotive changes made necessary there by its terminus-type station would allow for the ideal alignment of running schedules and maintenance work of these locomotives.
It then turned out that, due to the ever-increasing number of ICE trains with control cars arriving in Frankfurt, the DB decision to only run push-pull-type trains into Frankfurt station, and the necessary high investment to create a new high-tech train depot at the station, this plan was reevaluated. At the same time, spare capacity was created at the well-regarded ICE depot in Hamburg
Hamburg
-History:The first historic name for the city was, according to Claudius Ptolemy's reports, Treva.But the city takes its modern name, Hamburg, from the first permanent building on the site, a castle whose construction was ordered by the Emperor Charlemagne in AD 808...
-Eidelstedt, since the depot there was built to hold 14-center-carriage ICE trains, and only 12 center carriages were being used. This spare capacity would now be used for the maintenance of the class 101 units.
During the first years in this depot, the manufacturer ADtranz
Adtranz
ABB Daimler-Benz Transportation , commonly known under its brand Adtranz, was a multi-national rail transport equipment manufacturer with facilities concentrated in Europe and the USA....
, in order to fulfill their warranty obligations, housed a team of 15 employees in Hamburg-Eidelstedt. In 2002 there were still 2 ADtranz representatives present.
Basing the class 101 locomotives in Hamburg still seemed more cost-efficient to the DB than the construction of a new depot somewhere else, even though it meant the hiring of new drivers in Hamburg for the sometimes complicated, but necessary shunting/switching work. The base at a relative "outpost" in the far north of Germany also created problems with the service scheduling of the units.
Every 100,000 km, the class 101 locomotives are sent to Hamburg for their periodic maintenance check (Frist), where minor technical issues are addressed. This depot also features an underfloor lathe for the reprofiling of the axles. The locomotives were sent to the main railway workshop (Ausbesserungswerk, or AW) in Nuremberg
Nuremberg
Nuremberg[p] is a city in the German state of Bavaria, in the administrative region of Middle Franconia. Situated on the Pegnitz river and the Rhine–Main–Danube Canal, it is located about north of Munich and is Franconia's largest city. The population is 505,664...
for major maintenance during the first years; because of capacity issues at this AW, they sometimes were sent to the manufacturer in Kassel
Kassel
Kassel is a town located on the Fulda River in northern Hesse, Germany. It is the administrative seat of the Kassel Regierungsbezirk and the Kreis of the same name and has approximately 195,000 inhabitants.- History :...
instead. Currently, the AW in Dessau is responsible for the major maintenance work on class 101 units.
Advertisement on the locomotives
Due to its very smooth body design, and its itinerary across all of Germany, the class 101 locomotives are ideal to be used as traveling advertisement billboards. Starting as early as May 1998, the very first locomotive of the series, 101 001, featured an advertisement for the musical "Starlight ExpressStarlight Express
Starlight Express is a rock musical by Andrew Lloyd Webber , Richard Stilgoe and Arlene Phillips , with later revisions by Don Black and David Yazbek . The story follows a child's dream in which his toy train set comes to life; famously the actors perform wearing roller skates...
", and this campaign was followed by similar efforts from firms such as Bayer
Bayer
Bayer AG is a chemical and pharmaceutical company founded in Barmen , Germany in 1863. It is headquartered in Leverkusen, North Rhine-Westphalia, Germany and well known for its original brand of aspirin.-History:...
, CMA
CMA
- Accounting :* Cash management account* Certified Management Accountant, an accountant who has met certain qualifications* Certified market analyst, a financial analyst who has met certain qualifications set by the American Academy of Financial Management...
, and the German state of Baden-Württemberg
Baden-Württemberg
Baden-Württemberg is one of the 16 states of Germany. Baden-Württemberg is in the southwestern part of the country to the east of the Upper Rhine, and is the third largest in both area and population of Germany's sixteen states, with an area of and 10.7 million inhabitants...
. The DB also used their own locomotives to advertise their new pricing system. The adverts are printed onto heavy plastic foil, which is then glued to the body of the locomotive - there is no painting involved. Please refer to the web site Baureihe-101.de for a complete listing of all advertisements on each class 101 unit.
Zugpech of Brühl
On 6 February 2000, locomotive 101 092 was powering D203, an express train hauling skiers (also called the "Swiss Express"), with a run from AmsterdamAmsterdam
Amsterdam is the largest city and the capital of the Netherlands. The current position of Amsterdam as capital city of the Kingdom of the Netherlands is governed by the constitution of August 24, 1815 and its successors. Amsterdam has a population of 783,364 within city limits, an urban population...
to Basel
Basel
Basel or Basle In the national languages of Switzerland the city is also known as Bâle , Basilea and Basilea is Switzerland's third most populous city with about 166,000 inhabitants. Located where the Swiss, French and German borders meet, Basel also has suburbs in France and Germany...
. In Emmerich, a German-Dutch border town on the Rhine, the driver of this locomotive took charge of the train.
Shortly after Cologne
Cologne
Cologne is Germany's fourth-largest city , and is the largest city both in the Germany Federal State of North Rhine-Westphalia and within the Rhine-Ruhr Metropolitan Area, one of the major European metropolitan areas with more than ten million inhabitants.Cologne is located on both sides of the...
, in Hürth-Karlscheuren, the driver slowed the train per signal command to 60 km/h, due to a line switch necessitated by line construction work on the track that D203 was presently using. The train passed several switches and was running on the left-hand track. The driver correctly accelerated, as the track was approved for a speed of 130 km/h. D203 approached the station entry signal to Brühl station at around 100 km/h. The distant signal (Vorsignal) indicated an "Expect Stop" signal, and the driver decelerated the train.
The station entry signal, which was set to Stop, is superseded by a Zs-1 subsidiary signal, which permits continuing travel at 40 km/h. This subsidiary signal, because it is in relationship to a station entry signal, is valid only until the next main signal is reached, in this case the station exit signal. Therefore, the train should have traveled through Brühl station at 40 km/h.
However, D203 accelerated shortly after passing the subsidiary signal and passed the next switches at 120 km/h - in accordance with the speed advised in the printed "slow speed directive" (Langsamfahrstelle) for this spot, which each driver gets for each trip and which is located in the driver's cab, and in accordance with the signal given by the slow speed construction signal at the edge of the track. The automatic speed control done at all signals, normally done by the PZB 90 system, was not performed due to the construction in the immediate area. Once the construction works and speed restriction were passed, the driver accelerated. The train reached a set of points at a speed over 120 km/h (where it should have been traveling at 40 km/h), and derailed. The locomotive left the track and plowed toward houses at the side of the track, smashing into one. Several carriages tipped over, and some are wedged under the station roof. Nine people were killed, with an additional 149 persons injured, in some cases severely.
Initially the voices of blame for the inexperienced driver of D203 were almost unanimous. The 28-year old had twice failed the locomotive driver's test given by the DB, and had then found work at a private rail transport firm, where, after passing the driver's test, he had primarily driven locomotives involved in switching work. He had then rejoined the DB, and after completing a short retraining regiment, was permitted to also operate fast passenger trains.
As time passed, however, doubt began to grow about the exclusive fault of the driver. Other drivers have complained about the condition at Brühl station, in particular about the shortage, and confusing arrangement, of signs and signals in the construction area. In addition, the printed "slow speed directive" did, in fact, have directions for a speed of 120 km/h for that track in that spot, but which were meant only for the opposite direction. Signs for a maximum speed of 120 km/h were also found in the area. The driver of D203 made one very serious error, which his complaining colleagues had not made: The alternate signal for 40 km/h, by the station entry signal, had precedence over any other directives - had he followed that signal, nothing would have happened.
It turned out that the DB was aware, prior to the accident
Accident
An accident or mishap is an unforeseen and unplanned event or circumstance, often with lack of intention or necessity. It implies a generally negative outcome which may have been avoided or prevented had circumstances leading up to the accident been recognized, and acted upon, prior to its...
, of the confusing nature of the directives in the area. One week prior to the start of construction, 3 DB employees, in charge of traffic, construction, and the publishing of the "slow speed directive", had discussed the possibility of confusion in the interpretation of the signals. It became clear that the speed of 120 km/h was only valid for the track on the right, in the direction of Koblenz to Cologne. While traveling in the opposite direction, trains had to switch to the left track in that direction of travel due to the construction, and it was decided that the local signs directing a speed of 40 km/h were sufficient, and the "slow speed directive" did not need to be corrected and republished. Further, it was decided that the station inspector would contact the driver of each train to inform the driver of the situation. In fact, the directive for the station inspector to contact the driver was given, but was not made mandatory; also, the wireless communications were disrupted on the day of the accident.
The driver and the 3 DB employees were arraigned for causing death and injury due to negligence. The driver was found guilty of ignoring signals, and the 3 DB employees were found guilty for not installing the automatic high speed warning system, and for not clearing up the confusing directives. In October 2001, monetary damages between €
Euro
The euro is the official currency of the eurozone: 17 of the 27 member states of the European Union. It is also the currency used by the Institutions of the European Union. The eurozone consists of Austria, Belgium, Cyprus, Estonia, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg,...
7,000 and 20,000 were handed down.
Literature
- Dr. Karl Gerhard Baur: Im Führerstand. Baureihe 101. In: LOK MAGAZIN. Nr. 244/Jahrgang 41/2002. GeraNova Zeitschriftenverlag GmbH München, , S. 60-62.
- Wolfgang Klee: Die Hochleistungs-Universal-Loks der BR 101. In: Die Baureihen 101, 145, 152 und 182. Sonderausgabe 1/2001 EisenbahnJournal ISSN 0720-051-X, S. 22 -39.