Socket M is a CPU interface introduced by Intel in 2006 for the Intel Core

Intel Core

Yonah was the code name for Intel's first generation of 65 nm process mobile microprocessors, based on the Banias/Dothan-core Pentium M microarchitecture. SIMD performance has been improved through the addition of SSE3 instructions and improvements to SSE and SSE2 implementations, while integer...

 line of mobile processors.

Technical specifications

Socket M is used in all Intel Core products, as well as the Core-derived Dual-Core Xeon

Xeon

The Xeon is a brand of multiprocessing- or multi-socket-capable x86 microprocessors from Intel Corporation targeted at the non-consumer server, workstation and embedded system markets.-Overview:...

 codenamed Sossaman. It was also used in the first generation of the mobile version of Intel's Core 2 Duo, specifically, the T5x00 and T7x00 Merom

Merom (microprocessor)

Merom is the code name for various Intel processors that are sold as Core 2 Duo, Core 2 Solo, Pentium Dual-Core and Celeron. It was the first mobile processor to be based on the Core microarchitecture, replacing the Enhanced Pentium M based Yonah processor. Merom has product code 80537, which is...

 lines (referred to as Napa Refresh), though that line switched to Socket P

Socket P

The Intel Socket P is the mobile processor socket replacement for Core microarchitecture chips such as Core 2 Duo. It launched on May 9, 2007, as part of the Santa Rosa platform with the Merom and Penryn processors.-Technical specifications:...

 (Santa Rosa) in 2007. It typically uses the Intel 945PM/945GM chipsets which support up to 667 MHz FSB and the Intel PM965/GM965 which allows 800 MHz FSB support, though the Socket M, PM965/GM965 combination is less common. The "Sossaman" Xeons use the E7520 chipset.

Relation to other sockets

Socket M is pin-compatible with desktop socket mPGA478A but it is not electrically compatible. Socket M is not pin-compatible with the older desktop Socket 478

Socket 478

Socket 478 is a 478-contact CPU socket used for Intel's Pentium 4 and Celeron series CPUs.Socket 478 was launched with the Northwood core to compete with AMD's 462-pin Socket A and their Athlon XP processors. Socket 478 was intended to be the replacement for Socket 423, a Willamette-based...

 (mPGA478B) or the newer mobile Socket P

Socket P

The Intel Socket P is the mobile processor socket replacement for Core microarchitecture chips such as Core 2 Duo. It launched on May 9, 2007, as part of the Santa Rosa platform with the Merom and Penryn processors.-Technical specifications:...

 (mPGA478MN) by location of one pin; it is also incompatible with most versions of the older mobile Socket 479

Socket 479

Socket 479 is the CPU socket for the Intel Pentium M and Celeron M, mobile processors. Normally used in laptops, but has also been used with Tualatin-M Pentium III processors. The official naming by Intel is µFCPGA and µPGA479M...

. Pentium III-M

Pentium III

The Pentium III brand refers to Intel's 32-bit x86 desktop and mobile microprocessors based on the sixth-generation P6 microarchitecture introduced on February 26, 1999. The brand's initial processors were very similar to the earlier Pentium II-branded microprocessors...

 processors designed for the first version of Socket 479 will physically fit into a Socket M, but are electrically incompatible with it. Although conflicting information has been published, no 45 nm Penryn

Penryn (microprocessor)

Penryn is the code name of a processor from Intel that is sold in varying configurations as Core 2 Solo, Core 2 Duo, Core 2 Quad, Pentium and Celeron....

processors have been released for Socket M.